钒氧化物电极材料晶格呼吸现象原位探测及其反应机制研究

作为锂离子电池正极材料,层状钒氧化物具有优异的物理特性和良好的储锂性能,因此被广泛研究与应用于工业生产与日常生活的各个方面.然而,在脱嵌锂的过程中,V₂O₅凝胶等层状钒氧化物的层状结构存在“晶格呼吸”现象.这种现象导致了电极材料的钝化,并进一步导致电池容量快速衰减.采用了原位X射线衍射（XRD）来研究一种层状钒氧化物（VO_x）在充放电过程中的“晶格呼吸”现象,揭示了其独特的相变过程.在充放电过程中,原位XRD对应的二维衍射图显示出三个不同的阶段,分别对应三个固溶反应.放电过程中,三个阶段的衍射峰都向高角度偏移,表明在锂离子嵌入过程中,VO_x的层间距存在持续收缩过程.（001）层间距大小随充放电过程的变化图进一步证明了这三个过程的不连续性.这些发现揭示了这类材料在电极反应过程中的晶体结构变化规律以及造成其容量衰减的原因.     

Effect of Copper on Solid Electrolytes (Ce0.8Sm0.2)1 ? xCuxO2 ? δ and Composite Cathodes Based on La0.8Sr0.2MnO3

The phase composition and electroconduction in air of solid electrolytes (Ce_0.8Sm_0.2)_{1 − x} Cu_xO_{2 − δ} (CSCu), where x = 0, 2, 5, 10, and 20 mol % and which are synthesized using the ceramic technology, are studied. Adding an additive of CuO lowers the CSCu sintering temperature by 100– 200°C and leads to the formation of single-phase solid solutions of a fluorite type up to x = 10 mol %. The electroconductivity of the CSCu electrolytes remains practically invariant upon adding up to 5 mol % Cu and equals 0.089–0.095 and 0.017–0.021 S cm⁻¹ at 800 and 600°C. The sintering, adhesion, and electroconductance of composite cathodes based on La_0.8Sr_0.2MnO₃ with 40% CSCu and their electrochemical behavior in air in the temperature interval 900–1000°C on carrying electrolyte Zr^0.9Y_0.1O_1.95 with a CSCu sublayer containing 2 mol % Cu are studied.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 656–661.Original Russian Text Copyright © 2005 by Bogdanovich, Gorelov, Balakireva, Dem’yanenko.     

Wigner function of the rotating Morse oscillator

We present an analytical expression of the Wigner distribution function (WDF) for the bound eigenstates of the rotating Morse oscillator (RMO). The effect of rotational excitation on the WDF on the quantum phase space has been demonstrated. This effect has been visualized by a series of contour diagrams for given rovibrational quantum states. Rotations of the molecule have been proved to qualitatively and quantitatively change the Wigner function. As a result, the most probable distance between atoms in a rotating molecule changes, and depends on the parity of the vibrational quantum number. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

化学化工虚拟仿真实验教学平台的建设与应用

Virtual simulation teaching is a new type of teaching mode in recent years, which is a fusion of multiple disciplines, multiple regions and multi-level laboratory teaching methods. Taking virtual simulation experiment platform construction of chemical engineering in Tianjin University as an example, this paper introduces the chemical safety knowledge, the integration of theoretical knowledge, the experimental content, the specific content of virtual simulation resources, and the characteristic of virtual simulation experiment platform. This platform provides a new model of efficient combination of virtual simulation resources and traditional teaching resources, which promotes the development of chemical laboratory teaching.     

生物质裂解产物的制备及HPLC检测其成分的虚拟仿真实验开发

In order to improve university laboratory teaching and practical education under the background of information technology, as well as overcome the difficulty for practical training, develop a virtual simulation experiment platform for rapid pyrolysis of natal materials and high-performance liquid chromatographic (HPLC) detection of its components. The experiment integrates the actual operation process of the plant to produce cleaved products by rapid pyrolysis of biomass with HPLC detection. The virtual experiment is divided into biomass sample pretreatment, rapid biomass pyrolysis, bio-oil extraction, and HPLC determination of complex components, making the biomass cleavage workshop "real" through simulation. This virtual simulation experiment fully integrates the utilization of biomass resources and basic chemistry courses (such as organic chemistry, instrumental analysis, chemical engineering principles, etc.), which are widely involved in agricultural and forestry majors with advantageous characteristics value.     

悬浮法生产可发性聚苯乙烯(EPS)虚拟仿真实验平台的设计与开发

为实现我校高分子材料与工程专业人才培养目标,即培养高素质工程应用型人才,弥补教学过程中实际操作的缺陷与不足,我们开发了基于实际工业生产的悬浮法生产可发性聚苯乙烯的虚拟仿真实验平台.详述了该平台的设计开发思路与理念,平台主题结构,以及实验主控界面设计思路和主要内容.实践证明,该平台不仅包含工程应用的相关知识,而且极大的提...     

Mass spectrometric monitoring of oxidation of aliphatic C6–C8 hydrocarbons and ethanol in low pressure oxygen and air plasmas

Experimental and theoretical studies on the oxidation of saturated hydrocarbons (n‐hexane, cyclohexane, n‐heptane, n‐octane and isooctane) and ethanol in 28 Torr O₂ or air plasma generated by a hollow cathode discharge ion source were made. Ions corresponding to [M + 15]⁺ and [M + 13]⁺ in addition to [M ? H]⁺ and [M ? 3H]⁺ were detected as major ions where M is the sample molecule. The ions [M + 15]⁺ and [M + 13]⁺ were assigned as oxidation products, [M ? H + O]⁺ and [M ? 3H + O]⁺, respectively. By the tandem mass spectrometry analysis of [M ? H + O]⁺ and [M ? 3H + O]⁺, H₂O, olefins (and/or cycloalkanes) and oxygen‐containing compounds were eliminated from these ions. Ozone as one of the terminal products in the O₂ plasma was postulated as the oxidizing reagent. As an example, the reactions of C₆H₁₄^+? with O₂ and of C₆H₁₃⁺ (CH₃CH₂CH⁺CH₂CH₂CH₃) with ozone were examined by density functional theory calculations. Nucleophilic interaction of ozone with C₆H₁₃⁺ leads to the formation of protonated ketone, CH₃CH₂C(=OH⁺)CH₂CH₂CH₃. In air plasma, [M ? H + O]⁺ became predominant over carbocations, [M ? H]⁺ and [M ? 3H]⁺. For ethanol, the protonated acetic acid CH₃C(OH)₂⁺ (m/z 61.03) was formed as the oxidation product. The peaks at m/z 75.04 and 75.08 are assigned as protonated ethyl formate and protonated diethyl ether, respectively, and that at m/z 89.06 as protonated ethyl acetate. Copyright © 2016 John Wiley & Sons, Ltd.     

过渡金属氧化物修饰石墨毡阴极及电催化氧化性能测试

采用H2O2化学预处理石墨毡,并将过渡金属氧化物Ce O2负载到石墨毡上,制备出复合石墨毡阴极材料。研究结果表明H2O2处理可增加石墨毡的含氧官能团,改善表面亲水性,进而提高Ce O2的负载量,XRD分析表明石墨毡表面负载的Ce O2为萤石结构。电化学阻抗谱(EIS)和循环伏安曲线(CV)分析表明修饰后的石墨毡电荷传输阻力变小,氧化还原电流强度显著增强,活性表面积增大8倍,线性扫描(LSV)实验表明改性石墨毡在氧还原过程中具有较大的电流密度,是未改性前的8.5倍。采用改性石墨毡作为阴极,进行电芬顿催化降解甲基橙测试,20 min脱色率达到96.8%,与未改性石墨毡相比,去除率提高133.2%,显著提高了其电催化氧化性能。     

钴掺杂Sr1.5La0.5MnO4的合成及高温电化学性能研究

采用EDTA-柠檬酸法合成了中温固体氧化物燃料电池阴极材料Sr_(1.5)La_(0.5)Mn_(1-x)Co_xO_4(SLMCOx),并利用粉末X射线衍射(XRD)、X射线光电子能谱(XPS)以及电化学交流阻抗谱(EIS)进行表征。结果表明,该材料与Ce0.9Gd0.1O1.95(CGO)在1 200℃烧结12 h不发生化学反应。随着Co掺入量的增加,氧化物中Mn~(3+)和Co~(2+)含量增多,晶格氧含量降低,晶格畸变率增大。交流阻抗谱(EIS)测试结果显示,钴的掺杂明显降低电极的极化电阻,其中Sr_(1.5)La_(0.5)Mn_(0.7)Co_(0.3)O_4阴极在700℃空气中的极化电阻为0.62Ω·cm~2,明显小于Sr_(1.5)La_(0.5)MnO_4阴极在750℃的极化电阻(1.5Ω·cm~2),表明钴掺杂的Sr_(1.5)La_(0.5)Mn_(1-x)CoxO_4是一种潜在的IT-SOFC阴极材料。     

Well-dispersed sulfur anchored on interconnected polypyrrole nanofiber network as high performance cathode for lithium-sulfur batteries

Preparation of novel sulfur/polypyrrole (S/PPy) composite consisting well-dispersed sulfur particles anchored on interconnected PPy nanowire network was demonstrated. In such hybrid structure, the as-prepared PPy clearly displays a three-dimensionally cross-linked and hierarchical porous structure, which was utilized in the composite cathode as a conductive network trapping soluble polysulfide intermediates and enhancing the overall electrochemical performance of the system. Benefiting from this unique structure, the S/PPy composite demonstrated excellent cycling stability, resulting in a discharge capacity of 931 mAh g⁻¹ at the second cycle and retained about 54% of this value over 100 cycles at 0.1 C. Furthermore, the S/PPy composite cathode exhibits a good rate capability with a discharge capacity of 584 mAh g⁻¹ at 1  C.