Approximations of open quotient and speed quotient from glottal airflow and egg waveforms : Effects of measurement criteria and sound pressure level

Noninvasive measures of vocal fold activity are useful for describingnormal and disordered voice production. Measures of open and speed quotient from glottal airflow and electroglottographic (EGG) waveforms have been used to describe timing events associated with vocal fold vibration. To date, there has been little consistency in the measurement criteria used to calculate quotient values. In this study, criteria of 20% and 50% were applied to the AC amplitude of glottal airflow and inverted EGG waveforms for measurement of open quotient. Criteria of 20%, 50%, and 80%, and a midslope criterion that segmented the waveform between 20% and 80% of the waveform amplitude, were used for the calculation of speed quotient. Subjects produced waveforms at sound pressure levels (SPL) of 70, 75, 80 and 85 dB. Results indicated that approximations of open quotient obtained from the glottal airflow waveform significantly decreased using both the 20% and 50% criteria as SPL increased from 80 to 85 dB. No significant changes were found in open quotient from the EGG waveform as a function of SPL. Results of speed quotient measures from the glottal airflow and EGG waveforms showed a generally increasing trend as SPL increased, although the differences were not statistically significant. The data suggest that the signal type, measurement criterion and SPL must be considered in interpreting quotient measures.     

Computational Modeling of Organizations Comes of Age

As they are maturing—i.e., as they are becoming validated, calibrated and refined—computational emulation models of organizations are evolving into: powerful new kinds of organizational design tools for predicting and mitigating organizational risks; and flexible new kinds of organizational theorem-provers for validating extant organization theory and developing new theory. Over the past 50 years, computational modeling and simulation have had enormous impacts on the rate of advancement of knowledge in fields like physics, chemistry and, more recently, biology; and their subsequent application has enabled whole new areas of engineering practice. In the same way, as our young discipline comes of age, computational organizational models are beginning to impact behavioral, organizational and economic science, and management consulting practice. This paper attempts to draw parallels between computational modeling in natural sciences and computational modeling of organizations as a contributor to both social science and management practice.To illustrate the lifecycle of a computational organizational model that is now relatively mature, this paper traces the evolution of the Virtual Design Team (VDT) computational modeling and simulation research project at Stanford University from its origins in 1988 to the present. It lays out the steps in the process of validating VDT as a computational emulation model of organizations to the point that VDT began to influence management practice and, subsequently, to advance organizational science. We discuss alternate research trajectories that can be taken by computational and mathematical modelers who prefer the typical natural science validation trajectory—i.e., who attempt to impact organizational science first and, perhaps subsequently, to impact management practice.The paper concludes with a discussion of the current state-of-the-art of computational modeling of organizations and some thoughts about where, and how rapidly, the field is headed.     

Experimental implementation of a low-frequency global sound equalization method based on free field propagation

An experimental implementation of a global sound equalization method in a rectangular room using active control is described in this paper. The main purpose of the work has been to provide experimental evidence that sound can be equalized in a continuous three-dimensional region, the listening zone, which occupies a considerable part of the complete volume of the room. The equalization method, based on the simulation of a progressive plane wave, was implemented in a room with inner dimensions of 2.70 m × 2.74 m × 2.40 m. With this method, the sound was reproduced by a matrix of 4 × 5 loudspeakers in one of the walls. After traveling through the room, the sound wave was absorbed on the opposite wall, which had a similar arrangement of loudspeakers, by means of active control. A set of 40 digital FIR filters was used to modify the original input signal before it was fed to the loudspeakers, one filter for each transducer. The optimal arrangement of the loudspeakers and the maximum frequency that can be equalized is analyzed theoretically in this paper. The presented experimental results show that sound equalization was possible from 10 Hz to approximately 425 Hz in the listening zone. A flat frequency response with deviations within ±5 decibels from the desired value was achieved. A higher demanding performance with deviations within ±1.5 decibels from a flat frequency response was attained in the interval between 20 Hz and 280 Hz. At the same time, the impulse response was quite well approximated to a delayed delta function in the listening zone. Examples of the spatial distribution of the sound field are also shown.     

Sound radiation and sound quality characteristics of refrigerator noise in real living environments

The characteristics of various types of refrigerator noise were investigated in an anechoic chamber and in a real living environment - a 100 m² apartment which is a common size in Korea. It was found that the sound pressure level of the refrigerator noise in the real living room was about 10 dB higher than the level in the anechoic chamber at the same position (1 m in front of refrigerator). In addition, a tolerance level for refrigerator noise was determined by subjective evaluation experiments. Refrigerator noise was presented by a loudspeaker placed in the kitchen where the refrigerator is normally located. Level 2 responses to the subjective evaluation (“hardly perceivable”) corresponded to a sound pressure level of about 26 dB(A), for which 90% of participants were satisfied with the level of refrigerator noise. A semantic differential test using various adjectives was also conducted to evaluate the sound quality of refrigerator noise. With the semantic differential and the factor analysis, adjectives used in this experiment were grouped into three factors. From the results of correlation and multiple regression analyses on the psychoacoustical parameters and subjective evaluations of 30 kinds of refrigerators, sound quality index which predict the subjective rating score were proposed.     

Estimation of directivity and sound power levels emitted by aircrafts during taxiing, for outdoor noise prediction purpose

Integrated noise model (INM) is the most internationally used software to calculate noise levels near airports. Take off, landing or pass by operations can be modeled by INM, but it does not consider aircrafts taxiing, which, in some cases, can be important to accurately evaluate and reduce airports’ noise assessment.Aircraft taxiing noise emission can be predicted using other prediction tools based on standards that describe sound attenuation during propagation outdoors. But these tools require data inputs that are not known: directivity and sound power levels emitted by aircraft during taxiing.This paper describes methods used to calculate directivity indexes and sound power levels, based on field measurements made in Madrid-Barajas Airport (Spain). Obtained results can be used as inputs for general purpose outdoor sound prediction software, which will be able to evaluate noise at airports vicinity as industrial noise.Directivity and sound power levels have been estimated in octave and third octave band terms, for several aircraft families.     

Embedded design based virtual instrument program for positron beam automation

Automation of positron beam experiment with a single chip embedded design using a programmable system on chip (PSoC) which provides easy interfacing of the high-voltage DC power supply is reported. Virtual Instrument (VI) control program written in Visual Basic 6.0 ensures the following functions (i) adjusting of sample high voltage by interacting with the programmed PSoC hardware, (ii) control of personal computer (PC) based multi channel analyzer (MCA) card for energy spectroscopy, (iii) analysis of the obtained spectrum to extract the relevant line shape parameters, (iv) plotting of relevant parameters and (v) saving the file in the appropriate format. The present study highlights the hardware features of the PSoC hardware module as well as the control of MCA and other units through programming in Visual Basic.     

On the Analysis of the Virtual Waiting Time in Open Queueing Networks

The model of an open queueing network in heavy traffic has been developed. These models are mathematical models of computer networks in heavy traffic. A limit theorem has been presented for the virtual waiting time of a customer in heavy traffic in open queueing networks. Finally, we present an application of the theorem—a reliability model from computer network practice.     

化学化工虚拟仿真实验教学平台的建设与应用

Virtual simulation teaching is a new type of teaching mode in recent years, which is a fusion of multiple disciplines, multiple regions and multi-level laboratory teaching methods. Taking virtual simulation experiment platform construction of chemical engineering in Tianjin University as an example, this paper introduces the chemical safety knowledge, the integration of theoretical knowledge, the experimental content, the specific content of virtual simulation resources, and the characteristic of virtual simulation experiment platform. This platform provides a new model of efficient combination of virtual simulation resources and traditional teaching resources, which promotes the development of chemical laboratory teaching.     

Hybrid passive/active absorbers for flow ducts

A new type of acoustic liner developed for broadband noise reduction in flow ducts is considered in this paper. It combines passive absorbent properties of a porous layer and active control at its rear face. The complete design procedure of this hybrid passive/active liner is developed here. The passive part is first considered with the determination of a suitable porous material and the cut-off frequency separating the active low frequency regime from the passive high frequency one. The control system is then presented: a digital adaptive feedback control is performed independently cell by cell, allowing an easy subsequent increase of the liner surface. The entire optimization process has been successfully applied to a laboratory flow duct: both predictions and measurements show the interest of the hybrid liner to reduce the noise radiation.