求解水中加肋板声辐射特性的虚拟声源法*

发展一种利用虚拟声源离散声场的方法求解加肋板在水中的声振耦合问题。由波叠加原理和单元体积速度匹配的原则,根据离散的结构单元满足的动力方程和结构与介质的交界相容性条件,确定虚拟声源强度,计算结构的声辐射功率。本文以简支矩形加肋板为例,在不获得结构表面振速和声压的情况下,计算了结构在水中的声辐射功率,并与解析方法计算的结果进行了比较,表明了该方法具有较好的计算精度。     

用于开口声辐射控制的虚拟声屏障实现 方法及机理研究*

建筑物通常留有开口以便人员物料的进出及室内的自然通风采光,但这些开口也是噪声传播的途径。传统被动噪声控制方法需要将开口封闭,且对低频噪声的控制效果不好,故引入有源噪声控制技术降低室内声源通过开口的声辐射。基于惠更斯原理,均布开口的次级源和误差传声器构成的平面型虚拟声屏障可以实现对开口声辐射的有效控制,数值仿真和实验已证明其有效性。将次级源安装在开口边界更有利于保留开口的功能且方便实际安装,但这样的单层边界虚拟声屏障降噪效果存在上限,仅能在低频段实现全局控制。和单层边界次级源相比,双层边界次级源可显著提高降噪量和有效降噪频率上限。该文回顾了开口声辐射有源控制的相关工作,并讨论了未来可能的研究方向。     

On the performance of a virtual user pairing scheme to efficiently utilize the spectrum of unpaired users in NOMA

This paper evaluates the performance of a virtual user pairing scheme that efficiently utilizes the spectrum of unpaired users in non-orthogonal multiple access (NOMA), termed as VP-NOMA. The scheme aims at utilizing the frequency bands of those users which remain unpaired due to the non-uniform distribution of users in a cellular area. We consider a case where the cell edge users are more than the cell center users, so that complete one-to-one correspondence does not exist between all cell center and cell edge users to be accommodated/paired using conventional NOMA (C-NOMA) user pairing. Thus, some cell edge users remain unpaired, and are served using conventional multiple access (OMA) schemes. In such scenario, VP-NOMA pairs a single cell center user with two or more clustered (closely located) cell edge users over non-overlapping frequency bands, thus enabling the cell center user to efficiently use the frequency bands of these previously unpaired cell edge users. Performance of VP-NOMA in terms of ergodic sum capacity (ESC), outage probability (OP), and outage sum capacity (OSC), is analyzed through comprehensive mathematical derivations and simulations for a generalized system model. Moreover, the mathematical analysis is validated through close concordance between analytical and simulation results of ESC, OP, and OSC.     

Linearized iterative method for determining effects of vessel attitude error on single-beacon localization

Single-beacon localization is an advanced (and relatively new) acoustic localization technique. The traditional single-beacon uses non-linear trajectories to localize underwater vessels, which has notable drawbacks in actual underwater operations. To mitigate the limitations associated with non-linear trajectories, we developed an innovative single-beacon localization with linear trajectories. The traditional linearized least square method is not suited to linear trajectories, so we developed a linearized iterative method that includes a virtual long baseline array to analyze the effects of vessel attitude error on single-beacon localization results. We simulated the forward velocity, number of beacons, distance measurement period, and vessel heading impact on horizontal localization. The results showed that according to the proposed analysis method, localization precision is strongly dependent on vessel attitude error.     

基于LabVIEW Vision的无人机自主着降系统设计与实现

四旋翼无人机具有低成本、垂直起降、机动性好等优点,在民用领域诸如航拍、植保、物流、电力巡线等场合得到了广泛的关注和应用。随着四旋翼无人机应用的普及,一些新的问题也随之出现,其中一个厄待解决的问题是如何提高无人机的降落精度和可靠性,特别在超视距应用场景下,这一需求尤为突出。通过采用机器视觉技术,利用LabVIEW Vision编制视觉识别软件,可以控制四旋翼无人机实现高精度的自主降落。     

In-situ mechanical properties identification of 3D particulate composites using the Virtual Fields Method

This paper presents an identification procedure based on the Virtual Fields Method (VFM) for identifying in situ mechanical properties of composite materials constitutive phases from 3D full-field measurements. The new procedure, called the Regularized Virtual Fields Method (RVFM), improves the accuracy of the VFM thanks to the imposition of mechanical constraints derived from an appropriate homogenization model. The developed algorithms were validated through virtual experiments on particulate composites. The robustness of both the VFM and the RVFM was assessed in the presence of noisy strain data for various microstructures. A study was also carried out to investigate the influence of the size of region of interests on the reliability of the identified parameters. Accordingly, the optimum size of region of interest was determined based on full-field measurement requirements and accuracy of the identified parameters. This study enables determining, a priori, the required magnification level of 3D images for composites of any mechanical and morphological characteristics.     

虚拟声技术及其应用(上)

本文综述了虚拟声技术及其应用。在简单回顾了有关虚拟声的心理声学基础后，论述和分析了耳机和扬声器重发虚拟声的基本原理和基本的缺陷，总结了近年所提出的虚拟声的改进方法，最后探讨了虚拟声在科学研究、工程技术和消费电子领域的各种应用。     

基于重叠栅工艺的硅量子点阵列的制备与调控

利用半导体量子点阵列结构实现近邻耦合是规模化扩展自旋量子比特的主要方案之一.随着量子点数目的增加,量子点阵列器件的制作工艺及参数调控均愈加复杂.本文介绍了一种重叠栅工艺结构,利用多层相互重叠且具有不同功能的栅极定义量子点,制作出结构紧凑、调控性好的量子点阵列器件,解决了工艺扩展的难题.此外,本文发展了一套高效可靠的调控方法,按顺序逐个添加量子点并建立虚拟电极,实现了对量子点参数的独立控制,并且能够高效且独立地调控各量子点中的电子数目,克服了大规模量子点阵列中电压参数配置的困难.这些方法为未来实现大规模自旋比特阵列提供了一种标准化的方案.     

基于虚拟仪器的导弹质心定位系统设计与实现

针对传统导弹质心定位设备精度低,操作繁琐等弊端,从弹体质心定位原理出发,合理选取力矩计算参考点,建立质心定位模型;以基于PCI总线的内插式DAQ虚拟仪器测控平台为依托,突出“通用性、精确性、高效性”的设计理念,制定系统总体设计方案,围绕导弹质量测量与质心定位技术展开研究与工程实现;实际应用表明,本系统可拓展应用于多型导弹和大型圆柱形工件的称重与质心定位,满足导弹飞行控制研究和装配工艺要求。     

基于LabVIEW空间瞬态光信号处理技术

分析了待探测的瞬态光信号、背景光信号和高频干扰信号频率的特性,利用LabVIEW软件平台设计虚拟仪器,进行信号处理和分析.设计了数字滤波器,对采集到的信号进行数字滤波,对滤波后的目标信号进行谱估计,得到功率谱密度.试验结果表明,该方法设计简单,运行可靠,滤波效果显著.