MOCVD制备InxGa1－xN/GaN MQWs的温度依赖性

利用方势阱模型对In_xGa_1－xN/GaN MQWs结构的光特性进行了量子力学定性理论分析.并在MO源流量恒定条件下，在570℃～640℃范围内进行了不同生长温度的多量子阱制备实验，对In_xGa_1－xN制备过程中的In组份掺入效率的温度依赖关系进行研究.通过对制备样品的PL谱测量分析，得到了587℃～600℃的In组份最佳掺入温度区间.     

火焰辐射及偶丝导热对热电偶测温影响的数值分析

本文利用层流同向扩散乙烯火焰的数值模拟结果,根据所得的火焰温度场、气体速度场、火焰辐射场,分析火焰辐射、热电偶偶丝导热对热电偶测温的影响.结果表明在火焰的低温区火焰辐射要大于节点向外辐射,节点得到的能量要高于节点损失的能量,因此在火焰的低温区节点温度要高于当地的气体温度;同时直径为100μm的热电偶存在较大的导热,对节点温度测量有较大的影响.     

SECRAL等离子体韧致辐射谱的测量

The axial emitted bremsstrahlung spectra were measured on SECRAL(Superconducting ECR ion source with Advanced design in Lanzhou)using an HPGe detector.The spectral temperature T_(spe) was obtained from the linear fit of the spectra in the semi-log present.The evolution of T_(spe) with microwave power and magnetic field configuration is investigated in this paper.     

��Ԥ���븨�������赲�ŵ�ת���¶ȵ��о�

用火花预电离辅助介质阻挡放电装置在大气压空气中实现了均匀的类辉光放电。通过用光谱模拟法和波尔兹曼图解法对N 2 第一负带系B2Σ→X 2Σ(0,0)带发射谱线的分析,对放电过程中N 2 的转动温度进行了诊断。研究了不同频率和放电模式下转动温度的变化规律,对由两种方法计算所得的温度进行了对比。实验结果表明,转动温度会随着外加频率的增加而缓慢的增加;当放电从类辉光模式变到丝状放电模式时,转动温度会有70K左右的升高。     

Emission properties of thin films of electroactive doped polymers

We have studied the effect of the intensity of the exciting radiation and the temperature on the emission properties of two kinds of thin-film samples based on blends of two types of organic electroactive materials: polyfluorene + iridium triphenylpyridinate and polyepoxypropylcarbazole + zero-th order PAMAM dendrimer with eosin. We have shown that an increase in the excitation intensity leads to an increase in the intensity of the luminescence of the polymer matrices and the iridium complex up to a power density of 300 kW/cm², and the emission of the dendrimer is rapidly saturated and does not return to the initial value when the excitation level decreases. Heating up to 170°C followed by cooling causes an increase in the intensity for all the components except the dendrimer. The data obtained show that annealing is an important method for improving the emission efficiency of the proposed thin-film structures, due to a change in the packing of the activator molecules in the polymer matrix leading to more efficient transfer of the excitation energy. Molecules of the studied dendrimer are not stable when exposed to optical radiation and temperature. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 6, pp. 820–825, November–December, 2007.     

Effect of the stagnation temperature on supersonic flow parameters: Application for air in nozzles

When the stagnation temperature of a perfect gas increases, the specific heats and their ratio do not remain constant any more and start to vary with this temperature. The gas remains perfect and its state equation always remains valid, except it will be called a calorically imperfect gas. The aim of this research is to develop the relations of the necessary thermodynamics and geometrical ratios and to study the supersonic flow at high temperature (lower than the threshold of dissociation). The results are found by the resolution of nonlinear algebraic equations and integration of complex analytical functions where the exact calculation is impossible. The dichotomy method is used to solve the nonlinear equation, and the Simpson algorithm is used for the numerical integration of the found integrals. A condensation of the nodes is used, since the functions to be integrated have a high gradient at the extremity of the interval of integration. A comparison is made with a calorifcally perfect gas to determine the error of this. An application is made for air in a supersonic nozzle. The text was submitted by the authors in English.     

Effects of composition and sintering temperature on properties of NiZn and NiCuZn ferrites

Effects of composition and sintering temperature on grain size, porosity and magnetic properties of the NiZn and NiCuZn ferrites were investigated. It was found that the lowest power loss could be obtained with the equimolar composition for both NiZn and NiCuZn ferrites, which could be attributed to the lowest porosity. A slight deficiency or excess of Fe₂O₃ content had no pronounced influence on saturation magnetic flux density (B_s) in our testing range. However, a slight excess of Fe₂O₃ was effective to improve the initial permeability, which could be attributed to decrease of the magnetocrystalline anisotropy. With the increase of sintering temperature, the initial permeability and power loss of the NiZn and NiCuZn ferrites had different development trend, which could be explained by the different variation trend of the grain size and porosity. Power losses of the NiCuZn ferrite samples were lower than that of the NiZn ferrite samples at any sintering temperature. Synthetically, the NiCuZn ferrites had a better performance than the NiZn ferrites in power field use.     

Development of rotational CARS for combustion diagnostics using a polarization approach

Rotational Coherent anti-Stokes Raman spectroscopy (CARS) has the last decades been developed into a useful tool for thermometry and concentration measurements in combustion. In this paper, we present a novel polarization approach of the technique, which will enhance its potential and widen the range of conditions at which it can be utilized. The theory of the polarization approach is described in detail. It is shown that by specific arrangement of the polarizations of the laser beams, total suppression of the non-resonant background signal can be obtained, and thus by probing only the resonant CARS signal the diagnostic utility of the technique increases. The main benefit of the approach is in situations where the non-resonant background signal is relatively high in comparison with the resonant signal. The high potential of polarization rotational CARS for thermometry is demonstrated in some illustrative examples, for example, nitrogen thermometry on the fuel side of diffusion flames, and carbon monoxide thermometry in the product gas of ethylene/oxygen/argon-flames.     

Fabrication and magnetic property of binary Co-Ni nanowire array by alternating current electrodeposition

Ordered binary Co-Ni nanowire arrays with different components have successfully been fabricated by ac electrodeposition. The as-obtained nanowires exhibit a diameter of about 49.2 nm and aspect ratio of more than 30. A highly preferential orientation of the Co-Ni nanowires has been obtained by XRD. The magnetic properties of Co-Ni nanowire arrays determined by VSM are as the function of the Co-Ni components. The maximum value of coercivities perpendicular to the array is 2073 Oe. However, the magnetic properties of such nanowire arrays exhibited a bad thermal stability at the medium temperature of 200 °C.     

一种控温热管理器的传热传质分析

本文针对余热回收中控制热源温度的需求,提出了热管理器概念并研制开发了实验样机.本文建立了热管理器内部传热传质二维模型,研究其工作机理.模拟结果表明,不凝气具有有效的凝结换热阻隔作用.工况变化时,蒸汽覆盖段长度显著变化,而这一区域内饱和蒸汽温度变化很小,说明热管理器具有良好的控温性能.计算结果与实验数据吻合很好,验证了理论模型的正确性.