Sulfamic Acid: Efficient,Cost-Effective Catalyst for Facile Synthesis of Deazaoxaflavin at Ambient Temperature

A facile, ecofriendly procedure has been developed for the synthesis of substituted 5-deaza-10-oxaflavins by sulfamic acid–catalyzed two-component condensation of salicylaldehyde and barbituric acid at ambient temperature. Mild reaction conditions, short reaction time, ambient temperature, ecofriendly solvent system, wide substrate scope, simple workup procedure, no need for chromatographic separation, and good yields are auxiliary advantages of the present protocol.     

Research Progress of Lithium Plating on Graphite Anode in Lithium‐Ion Batteries

Lithium plating on graphite anode is triggered by harsh conditions of fast charge and low temperature, which significantly accelerates SOH (state of health) degradation and may cause safety issues of lithium ion batteries (LIBs). This paper has reviewed recent research progress of lithium plating on graphite anode. Firstly, we summarize the forming mechanisms of Li plating with corresponding influence factors, the detecting methods and hazard of Li plating. Then, approaches to suppress Li plating are discussed, including anode surface modification, electrolyte composition optimization and development of optimal charge strategies. Finally, we conclude and propose the remaining challenges and prospects in terms of mechanism research, detecting approaches, and suppressing methods of Li plating. This review highlights the development of Li plating research and plays a guiding rule of further study on Li plating in LIBs.     

Effect of finite energy of intravalley acoustic phonons on the temperature of non-equilibrium electrons in a quantum surface

The effect of finite energy of intravalley acoustic phonons on the electric field dependence of the temperature of the non-equilibrium carriers in a quantum surface has been studied here. The calculations have been made, for a rather pure material, at low lattice temperature. Numerical results are obtained for GaAs and Si. The results are interesting being significantly different from what one obtains by neglecting the phonon energy.     

On the cryogenic magnetic transition and martensitic transformation of the austenite phase of 7MoPLUS duplex stainless steel

The magnetic behaviour and martensitic transformation at cryogenic temperatures (down to 4 K) of the austenite phase of the duplex stainless steel (DSS), 7MoPLUS, were studied. As regards the prediction of Neel temperature, the empirical expressions for austenitic stainless steels are not applicable to the austenite phase of 7MoPLUS, although the composition of the austenite phase falls within the composition ranges within which the expressions were developed. Regarding the prediction of martensitic point Ms, the applicability of ‘old’ and recently developed expressions has been examined. The recently developed expressions, which take into account more alloying elements and their interactions, are not suitable for the austenite phase of 7MoPLUS. But for the ‘old’, simpler expressions, they seem to be valid in the sense that they all predict high stability of the austenite phase. Results obtained from 7MoPLUS were qualitatively the same as those obtained from another DSS, designated as 2205. Reasons for the applicability and inapplicability of these empirical expressions are suggested.     

Load’s temporal characteristics for annulling forced vibrations of linear elastic plates

We consider trapezoidal load-time pulses with linearly increasing and affinely decreasing durations equal to integer multiples of the time period of the first bending mode of vibration of a linearly elastic structure. For arbitrary spatial distributions of loads applied to monolithic and laminated orthotropic plates, it is shown through numerical solutions that plates’ vibrations become miniscule after the load is removed. This phenomenon is independent of the dwell time (i.e., the time duration between the rising and the falling portions) during which the load is kept constant. The primary reason for this response is that for such time-dependent loads, nearly all of plate’s strain energy is concentrated in deformations corresponding to the fundamental bending mode of vibration. Thus plate’s deformations can be studied by taking the mode shape of the 1st bending mode as the basis function and reducing the problem to that of solving a single second-order ordinary differential equation. We have verified this postulate by comparing strain energies computed from the 3-dimensional deformations of different plate geometries and boundary conditions with those determined by using the single degree of freedom (DoF) model. Thus for trapezoidal time-dependent loads applied on plates, the 1 DoF model provides reasonably accurate results and saves considerable computational effort.     

Exact Hawking radiation of scalars,fermions, and bosons using the tunneling method without back-reaction

Hawking radiation is studied for arbitrary scalars, fermions and spin-1 bosons, using a tunneling approach, to every order in ? but ignoring back-reaction effects. It is shown that the additional quantum terms yield no new contribution to the Hawking temperature. Indeed, it is found that the limit of small ? in the standard quantum WKB approximation is replaced by the near-horizon limit in the gravitational WKB approach.     

改进实验仪器测量Bi／Ag线材的超导转变温度

对实验室现有的仪器进行改进并测量了Bi／Ag高温超导线材的Tc，结果为104．1K。     

悬浮液雾化进样感耦等离子体基本参数研究Ⅰ.等离子体激发温度测定

研究了悬浮液雾化进样感耦等离子体原子发射光谱基本参数——等离子体激发温度。实验用“线为温标线，并采用多谱线法测量溶液雾化进样和0．05％二氧化钛悬浮液雾化进样等离子体激发温度。测定结果显示这两种雾化进样方式的等离子体激发温度接近，为5000-6000K。随感耦等离子体原子发射光谱仪器功率的提高，悬浮液雾化进样等离子体激发温度也相应增大，但增大幅度较小。悬浮液雾化进样等离子体发射光谱分析，若单纯改变仪器功率对于颗粒在等离子体中的原子化效率没有显著的变化，因此对于分析结果没有显著的改善作用。     

Interaction of Short Laser Pulses in Wavelength Range from Infrared to X‐ray with Metals,Semiconductors, and Dielectrics

Laser‐matter interaction is defined by an electronic band structure of condensed matter and frequency ω_L of electromagnetic radiation. In the range of moderate fluences, the energy absorbed by electrons from radiation finally thermalizes in the ion thermal energy. The thermalization processes are different for optical as compared with X‐ray quanta and for metals relative to semiconductors and dielectrics, since the light absorption and electron‐electron, electron‐ion dynamics are sensitive to the electron population in a conduction band and the width of a forbidden gap. Although the thermalization processes are different, the final state is simply a heated matter. Laser heating creates powerful stresses in a target if duration of a laser pulse τ_L is short in acoustic time scale. Nucleation and material removal take place under such stresses. Such way of removal is called here the spallative ablation. Thus the spallative ablation is an ablation mechanism universally important for qualitatively different materials and quanta (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)