Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.     

Nonreciprocal devices in integrated optics

This article reviews the solutions that have been studied for the implementation of nonreciprocal devices in integrated optics. These components, either isolators or circulators, use the nonreciprocal interaction between light and a magnetic medium. The only two isolators that have been experimented on to date are described in detail with their advantages and drawbacks, and some solutions are proposed to overcome the difficulties encountered.     

The identification of the vibration control system parameters designed for continuous miner machines

The Continuous Miner machines are exposed to time dependent loads during normal operation of the rock cutting process. These loads cause vibrations, which have a negative influence on the whole structure of the machine. This phenomenon can be eliminated by applying passive or active vibration control systems (VCS). Generally these systems are coupled with additional elements, which provide dispersion or transfer energy. The energy thus acquired can also reinforce the intended function such as rock cutting operation in the case of mining machines. The objective of this paper is to present the method of numerical identification of VCS parameters for Continuous Miner machines. The main function of the presented system is to reduce displacement of cutting drum by using elastic element joined to machine chassis and applying appropriate algorithm of control of the angular velocity of cutting drum. The method described improves efficiency of mining and increases durability of machine. In order to determine mechanical and control parameters of VCS the genetic algorithm optimisation method conjugated with numerical modal analysis was used. Finally the transient dynamic analysis was performed for the full-scale model of Continuous Miner in order to verify VCS in normal working condition.     

Side-lobeless far-field spectrum of a short pulse from a circular aperture with Gaussian form of transmittance

The spectrum change of a Gaussian pulse in the far field is studied with the Fresnel diffraction integral when it is incident on an aperture with Gaussian form transmittance. It is found that the side-lobes of the diffracted spectral intensity, which exist in a normal circular aperture with unit transmittance, can be eliminated completely under such a condition. Also, the red shift and blue shift of the spectral intensity maximum of the incident pulse are presented.     

Yb3+/Tm3+共掺杂的钨酸镉纳米晶发光性能的研究

本文采用水热法制备了稀土离子Yb³⁺/Tm³⁺共掺杂的钨酸镉纳米晶。运用X-射线粉末衍射、场发射环境扫描电子显微镜和光谱分析对制备的样品的结构和发光性能进行了表征。根据XRD图谱可知, 钨酸镉为单斜晶系, 晶粒平均尺寸在28 nm左右。从ESEM图片可明显看出, 钨酸镉呈纳米棒结构, 直径在30 nm左右, 长径比在5~8之间。利用980 nm半导体激光器激发钨酸镉纳米晶得到样品的发射光谱, 存在一个较强的蓝光发射, 发光峰位于481 nm,对应于Tm³⁺的¹G₄→³H₆能级的跃迁, 分析了Tm³⁺/Yb³⁺离子共掺体系的发光机制。讨论了发光强度随稀土离子浓度的变化, 当Tm³⁺离子的掺杂浓度在2%, Yb³⁺/Tm³⁺物质的量浓度比为10:1时钨酸镉纳米晶的发光强度最强。根据泵浦功率与发光强度之间的关系, 可知处于481 nm的蓝光发射属于三光子过程, 由发光强度与掺杂浓度之间的双对数衰减曲线可知, 引起蓝光发射源于Tm³⁺的电偶极跃迁。     

Dephosphorylation of intact glycoprotein to greatly improve digestion efficiency coupled with matrix-assisted laser desorption/ionization–Fourier transform ion cyclotron resonance mass spectrometric analysis

Sialylation is essential for a variety of cellular functions. Herein, we used bovine fetuin with three potential N-linked glycosylation sites containing complex-type glycan structures, four potential O-linked glycosylation sites and six potential phosphorylation sites as a model compound to develop a highly-efficient digestion strategy for sialylated glycoproteins and efficient enrichment strategy for sialylated glycopeptides using titanium dioxide. The former according to the process of alkaline phosphatase digestion followed by tryptic digestion and then proteinase K digestion could greatly improve the enzymatic efficiency on fetuin, and the latter could obviously enhance the enrichment efficiency for multisialylated glycopeptides using phosphoric acid solution as elution buffer. The mass spectra of the enriched glycopeptides derived from fetuin reveal that several series of the ion clusters with mass difference of 291 Da correspond to the presence of multisialylated glycopeptides. In addition, the approach was applied to characterize the sialylated status of α2-macroglobulin and transferrin, respectively, from the sera of healthy subjects and sex- and age-matched patients with thyroid cancer, and their spectra indicate that the change in the amount of the glycoforms containing different number of sialic acid (SA) residues from one glycosylation site may be used to differentiate between healthy subjects and cancer cases.     

单矢量水听器估计目标方位的方法与实验

为评估基于单矢量水听器的方位估计能力,在黄海海域对矢量水听器进行实验。矢量水听器吊放于接收船尾部,采用平均声强器和复声强器方位估计方法,并提出以概率密度值最大的方位角作为目标方位估计值的具体处理准则,对恒定方向、匀速行驶的目标船方位进行估计,并求出两种方法的方位估计误差。结果表明,水听器布放深度10 m时,对正横距离为0.42 km的航速10 kn的目标船,平均声强器方法的水平方位角估计误差18°,极角估计误差为5°,可以在离目标船最远1.17 km处估计其方位;复声强法的水平方位角估计误差为13°,极角估计误差为8°,可以在离目标船最远2.35 km处估计其方位。在有接收船的噪声干扰情况下,复声强器比平均声强器方法估计的方位更准确,可以对更远处的噪声源进行方位估计。