Broadband excitation pulses for high‐field solid‐state nuclear magnetic resonance spectroscopy

In nuclear magnetic resonance spectroscopy, experimental limits due to the radiofrequency transmitter and/or coil means that conventional radiofrequency pulses (“hard pulses”) are sometimes not sufficiently powerful to excite magnetization uniformly over a desired range of frequencies. Effects due to nonuniform excitation are most frequently encountered at high magnetic fields for nuclei with a large range of chemical shifts. Using optimal control theory, we have designed broadband excitation pulses that are suitable for solid‐state samples under magic‐angle‐spinning conditions. These pulses are easy to implement, robust to spinning frequency variations, and radiofrequency inhomogeneities, and only four times as long as a corresponding hard pulse. The utility of these pulses for uniformly exciting ¹³C nuclei is demonstrated on a 900 MHz (21.1 T) spectrometer. Copyright © 2012 John Wiley & Sons, Ltd.     

HT—6M闭环反馈平衡控制系统

本文描述HT-6M托卡马克装置闭环反馈平衡控制系统的结构组成,通过对各个环节的简化,得到了有效实用的数学模型,进而分析了系统稳态和动态性能。实验结果表明,该系统运行可靠;并且,将等离子体环水平位移控制在2mm以内。     

线性二次型最优控制的并行算法和软件

构造了线性二次型最优控制的并行算法，介绍了这个并行算法在武汉大学“ＷＵＤＰ９１”并行分布式处理系统上试算的数值应用软件的框图．本软件适用于既定动态系统的平衡问题．对于经济系统，可通过政策控制变量来调节和改善其状态和响应．对于自治系统可找出最优控制使得消耗函数达到最小值．通过对一系列例子进行试算，结果证实，所构造的并行算法和相应的数值软件是有效的，其加速比约为７．     

稀土对小麦（Triticum aestivum）体内光合和呼吸速率及磷酸化功能的影响

以适当浓度稀土溶液处理小麦后，其光合和氧化磷酸化的磷氧比（Ｐ／Ｏ）、光合控制（Ｐｃ）、呼吸控制（ＲＣ）、状态３．４光合和呼吸速率（Ｓ３．Ｓ４）与对照样比均无显著性差异。状态２（Ｓ２）光合和呼吸速率提高，差异极显著。说明小麦用最适浓度稀土处理后，对其光合和呼吸的磷酸化机构和功能膜影响不大，但显著促进了光合和呼吸速率（Ｓ２），从而促进了电子传递链的活性，使ＡＴＰ形成量增加。     

线性动态系统的神经网络辨识与控制

近年来，不同结构的神经网络已成功地用于一大类动态系统的辩识与控制。本文应用函数型链接网提出一实际可行的辨识器与状态反馈控制器；研究的问题主要是线性动态系统在状态可测情形下在平衡点镇定问题。仿真结果显示了本文提出的方法的有效性。     

数据采集控制器ADAM—5510和上位机通信的实现

介绍了在VISUAL BASIC环境中研华公司的ADAM-5510数据采集控制器和上位机通信实现的方法。     

电弧炉电极位置控制系统的SIMULINK仿真研究

介绍了基于MATLAB5.2提供的仿真工具SIMULINK,对电弧炉电机位置控制系统进行建模、仿真和分析研究,首先得到了系统数学模型,用超前校正器（PD控制器）对该控制系统进行串联校正,然后用SIMULINK实现对该控制系统的全图形化功能模块结构图仿真计算,仿真结果表明,系统能得到更好的动态性能参数。     

多层绝热材料规模化干燥处理时温度场的测试与分析

对大批量处理多层绝热材料的大型专用干燥箱满负荷运行时工作区域的温度场进行测试,通过温度分布和温度场均匀性的分析,得出了最高温度发生点的位置与成因以及影响温度场均匀性的主要因素,并对温度的控制方法、多层材料的布置方案和干燥设备的改进提出了建议。     

The preparation of nanophase tungsten carbide powder with zeolite-X catalysts

The reduction–carburization of tungsten trioxide (WO₃) under carbon monoxide flow was studied in the temperature range of 300–750 °C. The reduction–carburization of WO₃ was improved by mechanically mixing with zeolite-HX, -NaX and -KX. The interaction between cation in zeolite-X and oxygen in WO₃ affected the improvement of the reduction–carburization of WO₃ to WC. Moreover, the improved reduction–carburization of WO₃ could lead to the decrease of reaction temperature. Because the particle size of WC is in contact with a reaction temperature, the nanophase WC can be prepared at low temperature. In particular, the particle size of WC was controlled by reaction temperature. The particle sizes of produced WC at 550, 650 and 700 °C were 25, 50 and 100 nm respectively.     

Effect of viscous damping on power transmissibility for the vibration isolation of building services equipment

Vibration isolation plays an important role in both the vibration and noise control of building services equipment. To evaluate vibration isolation performance, the force transmissibility method is commonly adopted. However, increasing the damping effect in the force transmissibility method reduces both the resonance peak value and the isolation performance in the “isolation region”. The limitation of the method is that the transmitted displacement of a floor structure and the interaction of mounting points are neglected. To include the floor displacement and the interaction of mounting points, Mak and Su recently proposed the power transmissibility method to assess the performance of vibration isolation. In this paper, the effect of viscous damping on power transmissibility is investigated. A practical procedure for experimentally determining the damping ratio is also given.