Propagation of thickness-twist waves in a multi-sectioned piezoelectric plate of 6 mm crystals

We study thickness-twist vibrations and waves in an unbounded, multi-sectioned piezoelectric plate of crystals with 6 mm symmetry or polarized ceramics. An exact solution from the three-dimensional equations of piezoelectricity is obtained. Basic vibration and wave propagation characteristics are calculated based on the solution. The results are useful in the understanding and design of plate resonators, filters and acoustic wave sensors of ZnO, AlN and polarized ceramics.     

Geometrically qualified ESPI vibration analysis of an engine

This paper presents an application in the automotive industry where a combination of electronic speckle-pattern interferometry and laser doppler velocimetry were used at a critical stage in the design process of an internal combustion engine. Combined deformation and surface relief measurements were used to study the phase and amplitude of deformation of a vibrating engine. The relief data was combined with the interferometer geometry and used to geometrically correct the deformation data, in an effort to improve accuracy. The measurements allowed rapid identification and quantification of design weaknesses, particularly those causing undesirable resonances. This led to a significant reduction in the design time and lowering of costs, when compared with existing design optimisation methods.     

Two-axis-scanning laser Doppler vibrometer for precision engineering

Laser Doppler vibrometer (LVD) has been the most favorite instrument for precision dynamics measurement due to its non-contact, high accuracy and high resolution. However, LDV can only give the dynamic data of a particular location on the entire feature. In order to get the whole field data, a laser beam-scanning mechanism has to be implemented. Currently, motor-driven scanning mirror is used to move the measurement probe from one point to another. The mechanical vibrations of the scanning mirror will reduce the measurement accuracy. This paper introduces a novel scanning LDV optical system embodied in an acousto-optic deflector scanning mechanism. It can improve the measurement accuracy since there is no mechanical motion involved. One main advantage of this system is that it generates a laser scanning beam in parallel that is different from the beam scanning in the conventional scanning laser Doppler vibrometer (SLDV). The new system has a board scanning range. The measurement target size ranges from few tens of millimeters down to 10 μm. We have demonstrated the capability of the novel system on scanning measurements of features as big as ultra-precision cutting tool to features as tiny as AFM cantilever. We believe that the novel SLDV will find profound potential applications in the precision engineering field.     

一种新的奇偶非线性相干态及其量子统计性质

定义了一种新的奇偶非线性相干态即算符B2[B=af(N)]的两个正交归一本征态,利用数值计算方法研究了它们的量子统计性质.结果表明,与通常的奇偶相干态不同,在参数|β|变化的某些范围内,只有偶非线性相干态可以存在压缩效应,而振幅平方压缩和反聚束效应在这两个态中均可以呈现 关键词： 新的奇偶非线性相干态 压缩 振幅平方压缩 反聚束效应     

振动谱学研究中的光谱线型函数

本文讨论了在振动谱带计算拟合处理中的光谱线型函数问题,推导出适用于单道及多道拉曼光谱仪及色散型红外谱仪谱带线型公式。通过实验及拟合计算证实了它们的适用性并讨论了可能的误差源。理论计算和实验验证结果说明:在振动谱的谱带拟合计算中,应使用根据测谱条件计算求得的谱带线型函数,以保证拟合结果的可靠性。     

低噪音摩阻复台材料影响因素的探讨

采用动态粘弹谱仪（ＤＤＶ）、电子扫描显微镜（ＳＥＭ）和摩擦试验机等对影响摩阻复合材料制动噪音的因素进行了探讨。结果表明，摩阻材料基体的合理改性以提高其损耗角正切ｔａｎδ对减少振动、降低噪音行之有效。同时对传统解决噪音的方法，如添加固体润滑剂、橡胶共混等进行了分析比较。     

Separation of piano keyboard vibrations into tonal and broadband components

A new method is presented for splitting musical notes into tonal and broadband components by removing the harmonic peaks from the spectra. This method was used to analyse the key vibrations of eight pianos (four grand and four upright). The broadband component of vibrations was found to be more intense in the upright pianos than in the grand pianos, while no such difference was found in the tonal component. As grands are considered to be superior to uprights, this suggests that it may be possible to improve upright pianos by reducing the strength of the broadband component of vibrations.     

Jaynes-Cummings模型中辐射场的振幅N次方压缩特性

本文研究了一初始处于激发态的二能级原子与相干态光场相互耦合的Jaynes-Cummings模型中场的振幅N次方压缩特性,给出了其压缩度随光场的初始平均光子数和压缩阶数的变化规律。     

基于简化的应变梯度理论下Kirchhoff板模型边值问题的提法及其应用北大核心CSCD

考虑应变梯度和速度梯度的影响,建立薄板控制微分方程及给出其边值问题的提法,修正了前人给出的薄板角点条件.采用Levy法,给出受分布力作用下简支板的挠度及自由振动频率的解析解.通过与文献中分子动力学数据对比,验证了该文模型的有效性并提出校核材料参数的一种方法.研究结果表明,增大弹性地基和应变梯度参数可以有效提高板的等效刚度,而速度梯度参数则相反.该文提出的板的边值问题为研究薄板在复杂支撑边界及外荷载等条件提供了理论依据.同时,有望为其有限元法、有限差分法和基于能量原理的Galerkin法等数值方法提供理论依据.     

Critical exponents,hyperscaling, and universal amplitude ratios for two- and three-dimensional self-avoiding walks

We make a high-precision Monte Carlo study of two- and three-dimensional self-avoiding walks (SAWs) of length up to 80,000 steps, using the pivot algorithm and the Karp-Luby algorithm. We study the critical exponentsv and 2 ₄ – as well as several universal amplitude ratios; in particular, we make an extremely sensitive test of the hyperscaling relationdv = 2 ₄ –. In two dimensions, we confirm the predicted exponentv=3/4 and the hyperscaling relation; we estimate the universal ratios <R _g ² >/<R _e ² >=0.14026±0.00007, <R _m ² >/<R _e ² >=0.43961±0.00034, and ^*=0.66296±0.00043 (68% confidence limits). In three dimensions, we estimatev=0.5877±0.0006 with a correctionto-scaling exponent ₁=0.56±0.03 (subjective 68% confidence limits). This value forv agrees excellently with the field-theoretic renormalization-group prediction, but there is some discrepancy for ₁. Earlier Monte Carlo estimates ofv, which were 0.592, are now seen to be biased by corrections to scaling. We estimate the universal ratios <R _g ² >/<R _e ² >=0.1599±0.0002 and ^*=0.2471±0.0003; since ^*>0, hyperscaling holds. The approach to ^* is from above, contrary to the prediction of the two-parameter renormalization-group theory. We critically reexamine this theory, and explain where the error lies. In an appendix, we prove rigorously (modulo some standard scaling assumptions) the hyperscaling relationdv = 2 ₄ – for two-dimensional SAWs.