A general model for nano-cantilever switches with consideration of surface effects and nonlinear curvature

A general model for nano-cantilever switches with consideration of surface stress, nonlinear curvature, the location and length of the fixed electrode is developed. Some representative cantilever switch architectures are incorporated into this model. The governing equation is derived by using Hamilton principal and solved numerical. Results show that the influence of nonlinear curvature and surface effect on the pull-in instability and free vibration is significant for a switch with a large gap-length ratio and a short fixed electrode (the length of the fixed electrode is smaller than that of the cantilever nanobeam). The length and position of the fixed electrode have a significant effect on the pull-in parameters.     

Molecular dynamics simulations of self-diffusion coefficient and thermal conductivity of methane at low and moderate densities

This article demonstrates a highly accurate molecular dynamics (MD) simulation of thermal conductivity of methane using an ab initio intermolecular potential. The quantum effects of the vibrational contribution to thermal conductivity are more efficiently accounted for in the present MD model by an analytical correction term as compared to by the Monte Carlo method. The average deviations between the calculated thermal conductivity and the experimental data are 0.92% for dilute methane and 1.29% for methane at moderate densities, as compared to approximately 20% or more in existing MD calculations. The results demonstrate the importance of considering vibrational contribution to the thermal conductivity which is mainly through the self-diffusion process.     

Nonlocal plate model for free vibrations of single-layered graphene sheets

Vibration analysis of single-layered graphene sheets (SLGSs) is investigated using nonlocal continuum plate model. To this end, Eringens's nonlocal elasticity equations are incorporated into the classical Mindlin plate theory for vibrations of rectangular nanoplates. In contrast to the classical model, the nonlocal model developed in this study has the capability to evaluate the natural frequencies of the graphene sheets with considering the size-effects on the vibrational characteristics of them. Solutions for frequencies of the free vibration of simply-supported and clamped SLGSs are computed using generalized differential quadrature (GDQ) method. Then, molecular dynamics (MD) simulations for the free vibration of various SLGSs with different values of side length and chirality are employed, the results of which are matched with the nonlocal model ones to derive the appropriate values of the nonlocal parameter relevant to each boundary condition. It is found that the value of the nonlocal parameter is independent of the magnitude of the geometrical variables of the system.     

A study of power transmissibility for the vibration isolation of coherent vibratory machines on the floor of a building

Vibration isolation is commonly adopted by engineers to reduce the vibratory effect caused by building services equipment. However, the relationship between the amount of sound power transmitted to the floor and the interaction between the mounting points of several machines is uncertain, as it is common to install several coherent machines on the same floor, for example, two water pumps of the same type in a plant room. We conduct an analytical study of the effects of the interaction between two coherent vibratory sources on the power transmitted to the floor. The study is based on two simple vibratory sources with a single contact point, two rectangular machine models of even-mass distribution with four symmetrical supports and the calculated mobilities of a simply supported concrete floor. We find that the total power obtained from coherent sources (point sources or machine models) differs considerably from that obtained from independent sources at some frequencies in a vibration isolation region. To predict the performance of isolators more accurately, the power transmissibility method proposed previously by Mak and Su should consider not only the effect of effective floor mobility and the interactions of the mounting points of the same sources, but also the interactions of the mounting points of different sources on the floor.     

The incidence game chromatic number

We introduce the incidence game chromatic number which unifies the ideas of game chromatic number and incidence coloring number of an undirected graph. For k-degenerate graphs with maximum degree Δ, the upper bound 2Δ+4k−2 for the incidence game chromatic number is given. If Δ≥5k, we improve this bound to the value 2Δ+3k−1. We also determine the exact incidence game chromatic number of cycles, stars and sufficiently large wheels and obtain the lower bound for the incidence game chromatic number of graphs of maximum degree Δ.     

Preparation, characterization and surface study of poly-epsilon caprolactone magnetic microparticles

Magnetic microparticles (MMP) have shown to be applied in increasing applications in various fields of biotechnology and medicine. One of their most promising utilization is the magnetic resonance imaging (MRI) in which superparamagnetic substances as magnetite are used in a nanometric size (less than 30 nm) and encapsulated within locally injected biodegradable microparticles. In this paper, magnetite has been encapsulated in polymer-based microparticles. The MMP have been prepared by an emulsion evaporation method. The different parameters influencing the particles size were investigated. The size was found to decrease as the stirring speed or the stabilizer amount (to certain limit) increases. The encapsulation efficacy was more than 90% yielding a magnetite loading of up to 30%, w/w. The X-ray photoelectron spectroscopy (XPS) showed less than 2% of iron atoms at the microparticles surface. The zeta potential response of MMP towards pH variation was very similar to that of magnetite-free microparticles confirming the encapsulation of magnetite within the microparticles. X-ray diffraction assays showed that magnetite crystalline structure was conserved after emulsification and MMP formation. Vibration simple magnetometer (VSM) showed a superparamagnetic profile of the MMP with a magnetic saturation increasing with the increased magnetite amount in the microparticles. These magnetic microparticles can enable clinicians to control microparticles distribution after a local administration in tumors by MRI. They can also be administered to target a defined tumor area by focusing a magnetic field on the surfaces covering the cancerous tissue.     

Vibrations and stability of axially traveling laminated beams

In this paper, vibrations and stability of an axially traveling laminated composite beam are investigated analytically via the method of multiple scales. Based on classical laminated beam theory, the governing equations of motion for a time-variant axial speed are obtained using Newton’s second law of motion and constitutive relations. The method of multiple scales, an approximate analytical method, is applied directly to the gyroscopic governing equations of motion and complex eigenfunctions and natural frequencies of the system are obtained. The stability boundaries of the system near resonance are determined via the Routh-Hurwitz criterion. Finally, a parametric study is conducted which considers the effects of laminate type and configuration as well as the mean speed and amplitude of speed fluctuations on the vibration response, natural frequencies and stability boundaries of the system.     

The vibration and stability of non-homogeneous orthotropic conical shells with clamped edges subjected to uniform external pressures

In this paper an analytical procedure is given to study the free vibration and stability characteristics of homogeneous and non-homogeneous orthotropic truncated and complete conical shells with clamped edges under uniform external pressures. The non-homogeneous orthotropic material properties of conical shells vary continuously in the thickness direction. The governing equations according to the Donnell’s theory are solved by Galerkin’s method and critical hydrostatic and lateral pressures and fundamental natural frequencies have been found analytically. The appropriate formulas for homogeneous orthotropic and isotropic conical shells and for cylindrical shells made of homogeneous and non-homogeneous, orthotropic and isotropic materials are found as a special case. Several examples are presented to show the accuracy and efficiency of the formulation. The closed-form solutions are verified by accurate different solutions. Finally, the influences of the non-homogeneity, orthotropy and the variations of conical shells characteristics on the critical lateral and hydrostatic pressures and natural frequencies are investigated, when Young’s moduli and density vary together and separately. The results obtained for homogeneous cases are compared with their counterparts in the literature.     

A study of the eigenvalue sensitivity by homotopy and perturbation methods

In this work, the sensitivity to material characteristics of eigenvalues is studied. From an initial structure, some defects of material or/and geometry are introduced. A method is proposed to solve the new eigenvalue problem from the initial one without using classical techniques. This method is based on the association of a homotopy transformation and the perturbation method.     

低温制冷机用柔性弹簧的研究进展及分析

阐述了柔性弹簧的结构类型和评价指标,归纳和总结了国内外柔性弹簧的研究现状和发展趋势。针对低温制冷机的大冷量和长寿命需求,提出了我国研究发展柔性弹簧的一些关键技术,完善柔性弹簧的综合性能评价标准,加强柔性弹簧的动态性能分析和弹簧组件研究,开发适应大冷量低温制冷机的间隙密封用柔性弹簧组件,实现柔性弹簧的自主设计。