Quantification of imatinib and related compounds using capillary electrophoresis-tandem mass spectrometry with field-amplified sample stacking

A quantification method for imatinib (IM), its major metabolite N-desmethyl imatinib (NDI), and a degradation by-product was developed using CE–MS combined with an online concentration technique. The use of multiple reaction monitoring (MRM)–MS/MS further improved the sensitivity of this technology. Liquid–liquid extraction (LLE) using tertiary butyl methyl ether yielded high recovery and reproducibility for the pretreatment of serum samples. The recovery rate exceeded 83% for all three analytes, and was 90% for IM. To improve quantification results, a conductivity-induced online analyte concentration technique, field-amplified sample stacking (FASS), was used. The S/N ratios were improved at least 10-fold when compared with conventional capillary zone electrophoresis. The detection limits were 0.2 ng/mL for IM, 0.4 ng/mL for NDI, and 4 ng/mL for the degradation by-product. These results are superior to those previously obtained by other reported methods. The new method was validated in terms of its selectivity, intra- and interday repeatability and accuracy, and sample storage stability, following the guidelines issued by the European Medicines Agency. Considering the convenient pretreatment procedure (LLE), superior sensitivity, and fast analysis speed (<15 min), this method can be useful in the determination of imatinib levels in blood.     

电感耦合等离子体发射光谱法测定记号笔笔芯和墨水中铜和铬

报道了使用ICP-AES测定记号笔芯和墨水中的铜和铬的方法。 主要关注了不同的样品前处理方法的研究。 结果表明: 对标记用的油性记号笔笔芯和含有高分子树脂的墨水, 采用550 ℃灰化, 混合酸(V_HNO3∶V_HClO4=3∶1)溶解的方法处理样品, 是该类样品比较好的处理方法; 而对不含有高分子树脂的墨水, 采用直接用混合酸(V_HNO3∶V_HClO4=3∶1)的消解即可。 消解后的样品经稀酸酸化后, 采用ICP-AES测定铜和铬, 结果准确、稳定。该方法适合记号笔或墨水中元素的测定。     

Improving signal-to-noise ratio for the forensic analysis of glass using micro X-ray fluorescence spectrometry

Micro X-ray fluorescence spectrometry (μXRF) is a standard technique used for the elemental analysis of glass fragments in forensic casework. The glass specimens encountered in casework are usually small (<1 mm), thin fragments that are partially transparent to the exciting X-ray beam. In addition to providing fluorescence from the small glass fragments, the primary beam X-rays can scatter within the chamber and provide noise in the measurements. To reduce scatter from the sample stage, the fragments are typically mounted on a thin plastic film and raised on an XRF sample cup (≤3 cm in height). However, at these heights, there may still be significant scatter from the sample stage, which adversely affects the signal-to-noise ratio (SNR) and the limit of detection (LOD). A plastic mount was designed and 3D-printed in-house to allow fragments to be raised as high as possible from the sample stage, thereby minimizing stage scatter. Most elements detected in glass showed an improvement in the SNR when using the 3D-printed mount for analyses. The greatest improvement (>30%) was observed for lower atomic number elements (Na and Mg) and higher atomic number elements (Sr and Zr). Another simple method to improve SNR is the use of primary beam filters; when using primary beam filters during analyses, elements with characteristic lines in the high-energy range (Rb, Sr, and Zr) showed the greatest improvement (>70%) in SNR. The impact of both strategies for the improvement of SNR is presented here.     

高盐样品中锂的电感耦合等离子体发射光谱法(ICP-OES)测定研究

锂是重要的战略金属和新能源材料,其开发利用受到全球的高度关注。在高盐卤水特别是盐湖卤水和地下卤水中富含巨量的锂资源,在对这些资源进行锂的开发利用过程中,需对锂的含量进行准确测定,然而卤水中共存的高浓度Na+, K+, Ca2+和Mg2+会对微量锂的准确测定产生严重的干扰。电感耦合等离子体发射光谱法(ICP-OES)具有线性范围宽和多元素同步分析能力,针对卤水中锂的快速准确测定,详细开展了高盐样品中锂的ICP-OES分析方法研究。结果表明,锂在610.364 nm处具有较高的信噪比,且Na+, K+, Ca2+, Mg2+和Ar不会对锂的测定产生显著的谱线干扰。然而,样品中大量共存的Na+, K+和Mg2+会对锂的测定产生严重的基体正干扰,而Ca2+产生负干扰。尽管内标法在消除基体干扰方面具有广泛的应用,但传统的以钇和钪为内标元素的内标法不能有效解决该问题。此外,针对标准加入法操作繁琐、不适合批量样品分析问题,以及基体匹配法需多离子匹配,且不适合样品基体组成变化的批量样品分析等问题,考察了采用单一组分进行复杂基体匹配的可行性。由于NaCl广泛存在于卤水中,且对锂的测定具有显著的增敏效应,通过系列研究发现,通过同时向样品和标准溶液中加入10 g·L-1的NaCl,成功解决了总量不超过40 g·L-1的NaCl, KCl和MgCl2所产生的干扰。尽管采用该法或沉淀预分离方式均不能消除Ca2+产生的负干扰,但当样品中Ca2+含量不高于1.8 g·L-1时,对测定不产生显著的影响。通过采用该方法对三种不同基体组成的卤水样品进行加标回收测定,其回收率在96.60%~104.20%范围内。此外,通过与电感耦合等离子体质谱法(ICP-MS)测定结果进行对比,充分论证了该法的准确性和可靠性(相对误差±3.66%)。该法仅以单一的NaCl进行复杂基体匹配,不仅简化了操作,还实现了基体组成变化的批量样品分析,因而在卤水中锂的快速准确测定及锂资源开发利用方面具有重要意义。     

Sample Entropy as a Tool to Assess Lumbo-Pelvic Movements in a Clinical Test for Low-Back-Pain Patients

Low back pain (LBP) obviously reduces the quality of life but is also the world’s leading cause of years lived with disability. Alterations in motor response and changes in movement patterns are expected in LBP patients when compared to healthy people. Such changes in dynamics may be assessed by the nonlinear analysis of kinematical time series recorded from one patient’s motion. Since sample entropy (SampEn) has emerged as a relevant index measuring the complexity of a given time series, we propose the development of a clinical test based on SampEn of a time series recorded by a wearable inertial measurement unit for repeated bending and returns (b and r) of the trunk. Twenty-three healthy participants were asked to perform, in random order, 50 repetitions of this movement by touching a stool and another 50 repetitions by touching a box on the floor. The angular amplitude of the b and r movement and the sample entropy of the three components of the angular velocity and acceleration were computed. We showed that the repetitive b and r “touch the stool” test could indeed be the basis of a clinical test for the evaluation of low-back-pain patients, with an optimal duration of 70 s, acceptable in daily clinical practice.     

浊点萃取光度法测定水样中亚硝酸根

A new method for the determination of trace nitrite by spectrophotometric after cloud point extraction was proposed.The effects of experimental conditions such as acidity,concentration of chromogenic reagent and surfactant,equilibration temperature and time on cloud point extraction were discussed.Under the optimum conditions,a good linear relationship was obtained in the range of 4.0～200 μg/L of the nitrite(r=0.9998),the detection limits of 0.43 μg/L.The recoveries fell in the range from 97.7% to 102.4% an...     

样本区间的概率分布

设(X1，X2，…Xn)为服从I=[0,1]上均匀分布的容量为n的简单随机样本，它们将I=[0，1]分隔成(n 1)个样本区间(sample spacing)．记Y0,Y1，…Yn分别为这些样本区间的长度，又设Zx(x,ω)为包含点X∈I的唯一的左闭右开区间的长度．由于随机选取的点集被广泛运用于许多概率模型中．例如流行病学、遗传学、时间序列分析以及交通流理论等．因此，对Zn(x)及其相关统计量分布的研究也就引起了人们的广泛关注．本文利用顺序统计量的性质讨论了Yi(O≤i≤n)以及Zn(x，ω)的概率分布，有利于今后对上述理论的研究。     

Analytical Methods for the Determination of 90Sr and 239,240Pu in Environmental Samples

Artificial long-lived radionuclides such as ⁹⁰Sr and ^239,240Pu have been long released into the environment by human nuclear activities, which have a profound impact on the ecological environment. It is of great significance to monitor the concentration of these radionuclides for environmental safety. This paper summarizes and critically discusses the separation and measurement methods for ultra-trace determination of ⁹⁰Sr, ²³⁹Pu, and ²⁴⁰Pu in the environment. After selecting the measurement method, it is necessary to consider the decontamination of the interference from matrix elements and the key elements, and this involves the choice of the separation method. Measurement methods include both radiometric methods and non-radiometric methods. Radiometric methods, including alpha spectroscopy, liquid scintillation spectrometry, etc., are commonly used methods for measuring ^239+240Pu and ⁹⁰Sr. Mass spectrometry, as the representative of non-radiometric measurement methods, has been regarded as the most promising analytical method due to its high absolute sensitivity, low detection limit, and relatively short sample-analysis time. Through the comparison of various measurement methods, the future development trend of radionuclide measurement is prospected in this review. The fully automatic and rapid analysis method is a highlight. The new mass spectrometer with ultra-high sensitivity shows strong analytical capabilities for extremely low concentrations of ⁹⁰Sr, ²³⁹Pu, and ²⁴⁰Pu, and it is expected to develop determination methods with higher sensitivity and lower detection limit.     

一种用于冶金炉前快速分析的新仪器——激光诱导击穿光谱仪

冶金炼钢要求快速分析冶金炉前样品来及时掌握冶炼过程。文章介绍了自主研制的一种新型的光谱仪——激光诱导击穿光谱仪,该仪器采用ns级脉宽的Nd∶YAG激光器作为样品离子化光源,激光聚焦样品表面激发产生的等离子体光谱依次经帕邢-龙格光学系统进行分光、光电倍增管探测、门控积分器积分、模拟数字转换器转换后获得的最终结果输入计算机进行数据处理。和目前冶金炉前样品分析常用的光谱仪相比,该仪器无需样品预处理,分析速度快(1 min或更少),准确灵敏度高,非常适用于冶金炉前样品的快速分析。近年来随着光纤技术的迅速发展,使用该仪器进行钢液实时在线分析和动态控制冶金工艺必将成为现实。     

Nonlinear stochastic interacting dynamics and complexity of financial gasket fractal-like lattice percolation

A novel nonlinear stochastic interacting price dynamics is proposed and investigated by the bond percolation on Sierpinski gasket fractal-like lattice, aim to make a new approach to reproduce and study the complexity dynamics of real security markets. Fractal-like lattices correspond to finite graphs with vertices and edges, which are similar to fractals, and Sierpinski gasket is a well-known example of fractals. Fractional ordinal array entropy and fractional ordinal array complexity are introduced to analyze the complexity behaviors of financial signals. To deeper comprehend the fluctuation characteristics of the stochastic price evolution, the complexity analysis of random logarithmic returns and volatility are preformed, including power-law distribution, fractional sample entropy and fractional ordinal array complexity. For further verifying the rationality and validity of the developed stochastic price evolution, the actual security market dataset are also studied with the same statistical methods for comparison. The empirical results show that this stochastic price dynamics can reconstruct complexity behaviors of the actual security markets to some extent.