Adoption of Common Schemes for Single and Sequential Extractions of Trace Metal in Soils and Sediments

Abstract

The various methods for determining the mode of occurrence of trace metals in sediments and soils have a long history which dates back to the determinations of the availability of metals for plant nutrition performed earlier. Various methods have been developed in the 70′s and 80′s dealing with both single and sequential extraction schemes. Although some schemes received wide acceptance, none of them developed into a commonly accepted procedure. As a result, the information obtained was site-specific and the interpretation of the results scientist-specific. The workshop on single and sequential extraction in sediments and soils held at Sitges     

KClO_4/Zr在石英管内的燃烧发射光谱与燃烧产物分析

为了研究燃烧条件对KClO_4/Zr烟火剂燃烧过程中光辐射性能的影响,考察了KClO_4/Zr在开放环境和不同规格封闭石英管内的燃烧发射光谱和燃烧产物。借助光纤光谱仪、光电二极管和示波器测试了烟火剂燃烧过程中的光辐射能量分布和闪光时间-强度曲线,分析了所得发射光谱在(590±10),(750±10)和(808±10)nm三个主吸收波段内的光谱效率,借助SEM表征了不同燃烧条件下KClO_4/Zr燃烧产物的形貌。结果表明:在开放条件下燃烧时,KClO_4/Zr的燃烧发射光谱在可见光到近红外的宽波段内,最强辐射出现在730~820nm波段。在石英管内封闭燃烧时,随着石英管体积的减少,在石英管外检测到的燃烧发射光谱强度逐渐减弱,光谱能量分布也呈现不同的变化规律,而且对火焰发射光谱分布进行处理后,随着石英管体积的变化,得到(590±10),(750±10)和(808±10)nm波段的光谱效率也呈现不同的变化规律。但是,随着石英管体积的减少,KClO_4/Zr烟火剂的爆燃闪光辐射时间逐渐缩短,峰值辐射强度逐渐提高。增加石英管的直径,有利于在管外获得更高的有效光辐射能量,减少石英管的直径,则有利于提高烟火剂的峰值辐射强度。随着管直径的增大,KClO_4燃烧更加充分,产物粒径较小,呈规则的球状。而管长度的改变对反应并无太大影响。     

不确定环境下基于时间、费用及鲁棒性权衡的多目标项目调度优化

项目调度中的时间和费用是两个重要的指标,而在不确定环境下进度计划的鲁棒性则是保证项目平稳实施的关键。本文研究不确定环境下的多目标项目调度优化问题,以优化项目的工期、鲁棒值和成本为目标安排各活动的开始时间。基于此,作者构建多目标项目调度优化模型,将模型分解为三个子模型分析目标间的权衡关系,然后设计非劣排序遗传算法进行求解,应用精英保留策略和基于子模型权衡关系的优化策略优化算法,进行算法测试和算例参数敏感性分析。最后,应用上述方法研究一个项目实例,计算得到非劣解集,实例的敏感性分析结果进一步验证了三个目标间的权衡关系,据此提出资源的有效利用策略。本文的研究可以为多目标项目调度制定进度计划提供定量化决策支持。     

Probing molecular environments with a fictitious isotopic dipole

A HD-like (HD: mono-deuterated hydrogen molecule) isotopic dipole moment is proposed as a sensible probe for molecular environments, in particular for electrostatic fields and polarizable (reactive) sites of molecules. Fictitious nuclear masses are chosen in order to yield a rigid dipole with a small appropriate magnitude. Upon subtracting the Born-Oppenheimer energy, the interaction is reduced to field-dipole-like and dipole-polarizability-like terms, the last one being particularly informative since connected to potentially reactive sites. Possible asymmetries of this term appear as signatures of charged sites in the molecule. The field strength and orientation are easily obtained by identifying the minimum field-dipole energy configuration and flipping the dipole from it. Tests with hydrogen, water, benzene, and chlorobenzene molecules confirm the good performance of the method. In an application to test the present models for hydrogen activation by a frustrated Lewis pair, the full potential of the method is assessed.     

The survival probability of critical and subcritical branching processes in finite state space Markovian environment

Let ${\left(Z_n\right)}_{n\ge 0}$ be a branching process in a random environment defined by a Markov chain ${\left(X_n\right)}_{n\ge 0}$ with values in a finite state space $\mathbb{X}$. Let ${\mathbb{P}}_i$ be the probability law generated by the trajectories of ${\left(X_n\right)}_{n\ge 0}$ starting at $X_0=i\in \mathbb{X}.$ We study the asymptotic behaviour of the joint survival probability ${\mathbb{P}}_i\left(Z_n>0,X_n=j\right)$, $j\in \mathbb{X}$ as $n\to +\infty$ in the critical and strongly, intermediate and weakly subcritical cases.     

Room Temperature Phosphorescence of 1-Bromo-4-(bromoacetyl)naphthalene Induced by Sodium Deoxycholate

Sodium deoxycholate (NaDOC) can induce 1-bromo-4-(bromoacetyl)naphthalene (BBAN) to undergo strong room temperature phosphorescence (RTP) without the removal of dissolved oxygen from the solution. RTP spectra, phosphorescence polarization and ¹³C NMR results, along with the molecular modeling calculations, supported the conclusion that BBAN molecule was combined in a sandwich with two NaDOC molecules by a “back-to-back” hydrophobic interaction arising from the apolar faces of the NaDOC molecules, which provided BBAN with a rigid enough microenvironment to produce RTP.     

Electron impact,electron capture negative ionization and positive chemical ionization mass spectra of organophosphorus flame retardants and plasticizers

Phosphate esters are important commercial products that have been used both as flame retardants and as plasticizers. To analyze these compounds by gas chromatographic mass spectrometry, it is important to understand the mass spectra of these compounds using various ionization modes. This paper is a systematic overview of the electron impact (EI), electron capture negative ionization (ECNI) and positive chemical ionization (PCI) mass spectra of 13 organophosphate esters. These data are useful for developing and optimizing analytical measurements. The EI spectra of these 13 compounds are dominated by ions such as H₄PO₄⁺, (M ? Cl)⁺, (M ? CH₂Cl)⁺ or (M)⁺ depending on specific chemical structures. The ECNI spectra are generally dominated by (M ? R)^?. The PCI spectra are mainly dominated by the protonated molecular ion (M + H)⁺. The branching of the alkyl substituents, the halogenation of the substituents and, for aromatic phosphate esters, ortho alkylation of the ring are all significant factors controlling the details of the fragmentation processes. EI provides the best sensitivity for the quantitative measurement of these compounds, but PCI and ECNI both have considerable qualitative selectivity. Copyright © 2013 John Wiley & Sons, Ltd.     

Simultaneous Anodic Stripping Voltammetric Determination of Pb and Cd,Using a Vibrating Gold Microwire Electrode,Assisted by Chemometric Techniques

Simultaneous anodic stripping voltammetric determination of Pb and Cd is restricted on gold electrodes as a result of the overlapping of these two peaks. This work describes the quantitative determination of a binary mixture system of Pb and Cd, at low concentration levels (up to 15.0 and 10.0 µg L^?1 for Pb and Cd, respectively) by differential pulse anodic stripping voltammetry (DPASV; deposition time of 30 s), using a green electrode (vibrating gold microwire electrode) without purging in a chloride medium (0.5 M NaCl) under moderate acidic conditions (HCl 1.0 mM), assisted by chemometric tools. The application of multivariate curve resolution alternating least squares (MCR‐ALS) for the resolution and quantification of both metals is shown. The optimized MCR‐ALS models showed good prediction ability with concentration prediction errors of 12.4 and 11.4 % for Pb and Cd, respectively. The quantitative results obtained by MCR‐ALS were compared to those obtained with partial least squares (PLS) and classical least squares (CLS) regression methods. For both metals, PLS and MCR‐ALS results are comparable and superior to CLS. For Cd, as a result of the peak shift problem, the application of CLS was unsuitable. MCR‐ALS provides additional advantage compared to PLS since it estimates the pure response of the analytes signal. Finally, the built up multivariate calibration models, based either in MCR‐ALS or PLS regression, allowed to quantify concentrations of Pb and Cd in surface river water samples, with satisfactory results.