基于LiCo0.8M0.2O2 (M=Ni,Zr)薄膜的全固态薄膜锂电池

用射频磁控溅射结合传统退火的方法制备LiCo0.8M0.2O2 (M=Ni,Zr)阴极薄膜．X射线衍射、拉曼光谱、扫描电子显微镜等手段表征了不同掺杂的LiCo0.8M0.2O2薄膜．结果显示,700℃退火的LiCo0.8M0．2O2薄膜具有类似α-NaFeO2的层状结构．通过对不同掺杂锂钴氧阴极的全固态薄膜锂电池Li／LiPON／LiCo0.8M0.2O2的电化学性能研究表明,电化学活性元素Ni的掺杂使全固态电池具有更大的放电容量(56μAh／cm2μm),而非电化学活性元素Zr的掺杂使全固态电池具有更好的循环稳定性．     

DESIGN OF A NOVEL 2-D UNIPLANAR CRLH-TL STRUCTURE

A novel uniplanar 2-D composite right/left-handed transmission line (CRLH-TL) structure is proposed based on a general transmission line theory and the way to increase the relative operating bandwidth in the left-handed (LH) region and lower the LH operating frequency is illustrated. In addition, a new method to extract parameters and calculate the Bloch impedance of the structure is presented. Numerical results of the dispersion as well as the extracted parameters are given, which are calculated based on full-wave simulation. The present 2-D uniplanar CRLH-TL structure is applicable to 2-D left-handed materials in lower and wider LH frequency range. Supported by the National Natural Science Foundation of China (No. 60371010) (No. 60471037) (No. 63531020)     

Extension of the range of resonator scanning spectrometer into submillimeter band and some perspectives of its further developments

Extension of the working frequency of modern resonator spectrometers into submillimeter wave range is described. Experimental record of atmospheric absorption spectrum covering 45-370 GHz range is demonstrated for the first time, and measured water vapor J′_{ka′, kc′}-J_{ka, kc} = 5_1,5-4_2,2 at 325 GHz line parameters are presented. For the first time pressure lineshift for the 325-GHz water vapor line is measured. Further extension of working range is discussed. New estimations of physical limits of time needed for measurements of absorption in the whole Backward Wave Oscillator (BWO) range are given for phase continuous synthesizer regime. Basic schemes of fast broadband continuous phase synthesized sources are discussed. Verification of the previous measurements of water vapor 3_1,3-2_2,0 at 183 GHz line parameters is presented. Comparisons with ringdown resonator spectrometers are given.     

Optical modulation and digital demodulation of an in-plane moiré carrier

A rotational mismatch of gratings is used to generate a fringe carrier of an in-plane moiré pattern so that specimen deformation shows itself in the form of modulation of the carrier frequency. As both the unmodulated and modulated carriers are the patterns without fringe-loop or fringe-connection, they are automatically numbered with monotonical increasing orders by a digital image processing system without any ambiguity. The orders at every pixel of the image are determined by interpolation of the orders of the tracked fringes to establish two grey image files, from the difference of which, the orders of the in-plane displacement moiré are displayed with grey-level variation.     

Design of polarization retarder suitable for nonlinear optical systems

We present a design technique of retarders suitable for nonlinear optical systems. A thin sample of LiNbO₃ crystal is utilized as a retarder for wide-ranging applications. Analysis shows that the same crystal can be used for single-wave or two-wave retardations, changing the orientation of the crystal only. As an application, the retarder is used to polarize two waves orthogonal, as necessary for difference frequency mixing in an AgGaSe₂ crystal.     

退火温度对Fe基纳米晶粉芯磁致频移特性影响的研究

研究了充有不同温度退火Fe基纳米晶粉芯LC回路的磁致频移特性（MFS），发现充有不同温度退火Fe基纳米晶粉芯LC回路的磁致频移不同，充有经600℃退火Fe基纳米晶粉芯LC回路的磁致频移最灵敏。     

Assessment of thermal expansion coefficient of methylsilsesquioxane thin film

For the methylsilsesquioxane film whose optical birefringence is almost zero, it was recently reported that its vertical thermal expansion coefficient (CTE) was approximately one order of magnitude larger than the lateral CTE. Though the birefringence is not an absolute predictor of anisotropic behavior, the discrepancy in both the CTEs was so remarkable that it was essential to investigate whether the anisotropy was intrinsic property or not. If the effect of Poisson's ratio is considered in the calculation of the vertical CTE and when elastic modulus measured by surface acoustic wave spectroscopy is used in the assessment of the lateral CTE, both the CTEs are coincident with each other. Therefore, it can be concluded that the discrepancy in the CTEs can be attributed to a higher in‐plane polymer chain orientation but it can also arise from the misleadingly assumed modulus and Poisson's ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3109–3120, 2006     

A compact optical heterodyne interferometer by optical integration and its application

A compact high-resolution optical heterodyne interferometer combining a two-frequency light module and a minute optical system is described. The light module, which generates two independent frequencies of light, is fabricated by proton exchange method on LiNbO₃ substrate. We report an experiment evaluating measurement accuracy using a micro-displacement measurement system which incorporates this interferometer. Results of the experiment with a standard thickness sample show high thermal stability with maximum measurement error of 1.8 nm at a temperature from 19°C to 33°C. The system was used to measure the hysteresis of a piezoelectric element for displacements of several nm, thereby making it possible to analyze the system quantitatively in practice.     

应用LiNbO_3声表面波驱动的全光纤声光频移器

介绍一种工作在10.7MHz的全光纤声光频移器.它由在LiNbO_3基片上制作的叉指电极换能器产生的声表面波驱动.当驱动电功率1.5W时,频移光转换效率达35％.     

Asymptotic analysis of elastic curved rods

We consider a sequence of curved rods which consist of isotropic material and which are clamped on the lower base or on both bases. We study the asymptotic behaviour of the stress tensor and displacement under the assumptions of linearized elasticity when the cross‐sectional diameter of the rods tends to zero and the body force is given in the particular form. The analysis covers the case of a non‐smooth limit line of centroids. We show how the body force and the choice of the approximating curved rods can affect the strong convergence and the limit form of the stress tensor for the curved rods clamped on both bases. Copyright © 2006 John Wiley & Sons, Ltd.