Magnetic phase transitions in nanostructures induced by shear stress under high pressure

Magnetic phase transitions of the first and second order were revealed by Mössbauer spectroscopy in nanosystems of - and -ferric oxides and metallic europium subjected to shear stress (240°) under high pressure (20 kbar). For - and -ferric oxide nanoclusters, the Curie (Neel) points decreased to 300 K, whereas for nanostructured europium the Neel point increased from 90 to 100 K. The thermodynamic model of magnetic phase transitions predicting a change in the character of magnetic phase transitions and a decrease (increase) in the critical Neel (Curie) points in nanoclusters was developed. The type of magnetic phase transitions and the change in the critical points were caused by defects in nanoclusters, whose maximum concentration was observed for the clusters with the 20—50 nm size range.     

目视催化褪色计时法测定超痕量钒的研究

本文基于在酸性介质中钒(V)催化溴酸钾氧化酸性铬蓝K褪色的新指示反应,建立了一个催化褪色计时法测定超痕量钒的新方法。在体系中引入活化剂抗坏血酸,灵敏度达2×10~(-12)ng/ml,测定范围在0.0l～3.0ng/ml,同时探讨了反应机理。确立了反应速率方程,方法简便经济,已用于天然水中痕量钒的测定。     

蝎型钒氧配合物的合成、结构及量子化学研究

设计合成了两种新型的以聚类吡唑硼酸盐为配体的钒氧配合物VO(acac)[HB(pz)3](1)和VO(acac)[HB(3,5-Me2pz)3]·CH3CN(2). 运用元素分析、 红外光谱和紫外光谱对所合成的配合物进行了表征, 并用X射线衍射测定了它们的晶体结构. 同时, 采用量子化学的Hartree Fock方法和自然轨道分析方法(NBO), 使用3-21G*(6d, 7f)基组计算得到了两个分子体系的分子轨道、原子电荷以及键级, 并对其结构进行了分析.     

锌基复合脱硫剂脱硫性能的研究

采用共沉淀法和机械混合法制备了Zn-Cu-Mn复合氧化物和ZCM(Z=ZnO、C=CuO、M=MnO2)复合氧化物，并对两种氧化物的脱硫能力进行了分析，同时也将这二种氧化物与单一的ZnO、MnO2和CuO的脱硫能力进行比较。利用XRD和FPD(火焰光度计)分别对复合氧化物的物质组成、结构和脱硫性能进行了分析。实验证明，Zn-Cu-Mn在250℃～350℃具有良好的脱硫能力，且300℃的脱硫能力最佳；空速为7799h-1时穿透硫容较高。煅烧温度为400℃时，Zn-Cu-Mn的脱硫能力高于ZnO。煅烧温度升高，Zn-Cu-Mn复合氧化物的比表面积和脱硫能力下降，且生成了具有尖晶石结构的CuMn2O4。与Zn-Cu-Mn复合氧化物和ZnO相比，ZCM复合氧化物的脱硫能力较低。煅烧温度为550℃时，ZCM体系中的MnO2分解为Mn2O3，当温度升至750℃时Mn2O3相消失，生成了具有尖晶石结构的CuMn2O4。     

容量法测定氧化钒中的各种价态钒

用NaOH溶液处理样品，分离V（V）然后以Fe(Ⅱ）滴定测定之。定量加入过量的V（V）到上述残渣中并用H2SO4溶解，用Fe(Ⅱ）滴定，计算出V（Ⅱ），V（Ⅲ）的含量。V（Ⅳ）的测定是通过从总钒量中扣除V（Ⅱ）、V（Ⅲ）、V（Ⅴ）的含量得到。V（Ⅱ）、V（Ⅲ）和V（Ⅴ）的回收率均大于96％，其8次测定结果的相对标准偏差分别为：9．8％、0．4％、1．2％；本法快速、简便，在实际应用中效果良好。     

钒(Ⅴ)-亚铁氰化钾-鲁米诺化学发光体系测定钒

本文利用钒(Ⅴ)-亚铁氰化钾-鲁米诺化学发光体系建立了痕量钒的化学发光测定法。方法检出限是2×10~(-10)g/mL钒,线性范围是4×10~(-10)～1×10~(-7)g/mL钒,测定的相对标准偏差小于2%,考察了26种常见离子的干扰情况。方法已用于水样中痕量钒的测定。     

Hydrothermal synthesis and structure characterization of a new 3D vanadium hydrogen phosphite with 14-ring channels: (C5N2H14)[VO(H2O)]3(HPO3)4·H2O

A new 3D vanadium hydrogen phosphite, (C₅N₂H₁₄)[VO(H₂O)]₃(HPO₃)₄·H₂O, has been prepared by hydrothermal reactions and characterized by single crystal X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, and magnetic techniques. It crystallizes in the triclinic space group P-1 (no. 2) with , , , α=76.124(3)°, β=83.726(4)^o, γ=75.222(4)^o, Z=2. The structure is built up from sharing equatorial oxygen atoms of VO₅(H₂O) octahedra with HPO₃ tetrahedra, which can be viewed as a (3,4) connected net. The framework is mainly constructed by two types of four-ring related chains. Intrachain and interchain hydrogen bonds play an important role on supporting the framework structure. The 14-ring tunnels in the structure are filled with 1-methypiperazinium and water molecules, which also contribute the hydrogen bonding with the vanadium phosphite framework.     

Vanadium and Chromium Catalysts for Polymerization of Ethylene

In the present progress report literature data concerning homogeneous catalyst systems based on vanadium and chromium are reviewed and complemented by a combined study of the magnetic properties and the polymerization activity of such systems. The results show that vanadium forms active species as V (III ) and as V (II ), but chromium only as Cr (II ); models are suggested for the polymerization process. — A comparison with heterogeneous systems (Phillips catalyst) allows the establishment of some general principles concerning the activity of the catalyst and the properties of the polymers.     

Au/CeO2/Y和Au-MFe2O4催化剂用于有氧条件下CH4还原NOx的研究

以CeO2／Y分子筛和MFe2O4(M=Ni,Co，Zn)为载体，制备Au／CeO2／Y和Au-MFe2O4负载型金催化剂．用CH4做还原剂，考察了它们在有氧条件下催化还原NOχ的活性．结果表明：在Au-Y中引人助剂Ce，使得Au／CeO2／Y的催化活性高于Au／Y；Au-CoFe2O4的催化活性高于Au-Fe2O3，反应温度为300℃时，NOχ在Au-CoFe2O4上的转化率达到39．70%．