有机小分子染料和聚阳离子分子超薄膜的制备及其摩擦学性能研究

制备了以有机小分子染料酸性红 1 8为阴离子、以聚烯丙基氯化铵和聚乙烯亚胺为聚阳离子的分子沉积膜 ,用紫外可见分光光度计、接触角测定仪和椭圆偏振光测厚仪对所制备的超薄膜进行了表征 .用DF PM型动 静摩擦系数精密测定装置考察了超薄膜的摩擦学性能 ,采用扫描电子显微镜对薄膜的磨痕表面进行了观察 .结果表明 ,所制备的超薄复合沉积膜具有良好的减摩和耐磨性能     

Electrochromic and structural characteristics of mesoporous WO<Subscript>3</Subscript> films prepared by a sol-gel method

The preparation of electrochromic films of mesoporous tungsten trioxide from tungstic acid and tungstic hexaethoxide precursors with the addition of an organic stabiliser via a sol-gel method is reported. These films have been structurally characterised and both the film morphology and crystalline composition of the films were found to be significantly dependent on the temperature at which the films were annealed and upon the choice of precursor. Films annealed at lower temperatures consisted of amorphous and hexagonal tungsten trioxide, whereas films annealed above 500 °C comprised solely of monoclinic WO₃. The electrochromic activity of the films was found to be equally dependent on method of preparation, and both the composition and the structure of the WO₃ films were shown to clearly influence the colouration efficiency of the films.Dedicated to Zbigniew Galus on the occasion of his 70^th birthday.     

一种非晶硅膜改性弹性玻璃毛细管交联中等极性固定相色谱柱的制备

研究了非晶硅膜改性的弹性玻璃毛细管交联ＯＶ－１７０１中等极性固定相色谱柱。在适当温度下，采用过氧化二异丙苯（ＤＣＵＰ）游离基引发交联ＯＶ－１７０１固定液，成功地制备了交联ＯＶ－１７０１柱，该柱具有柱效高、惰性好、耐溶剂、抗腐蚀和耐高温等性能，是一种新型高性能的中等极性交联柱。     

Preparation and Characterization of Nanotitanium Dioxide Coating Film Doped with Fe^3＋ Ions on Porous Ceramic

The nanotitanium dioxide （TiO2） photocatalytic and porous ceramic filtering technique is one of the advanced methods to effectively treat organic wastewater. The TiO2 sol doped with Fe^3＋ ions was prepared by sol-gel processing. The influences of the process conditions of coating nanophotocatalytic material- Fe^3＋-TiO2 film on the surface of porous ceramic filter by dipping-lift method on the performance of porous ceramic filter were studied. The porous ceramic filters have two functions at the same time, filtration and photocatalytic degradation. The results of this study showed that the pH and viscosity of the sol, amount of Fe^3＋ ions doped as well as the coating times greatly affect the quality of coating film, the performance parameters and the photocatalytic activity of the porous ceramic filter. When the pH of the sol is 3-4, the viscosity is about 6 mPa.S, the amount of doped Fe^3＋ ions is about 2.0 g/L, the porous ceramic filter has been shown to have the best filtering performance and photocatalytic activity. In this condition, the porosity of porous ceramic is about 42.5%, the pore diameter is 8-10μm. The degradation of methyl-orange is 74.76% under lighting for 120 rain.     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

Determination of subnanomolar concentrations of cobalt by adsorptive stripping voltammetry at a bismuth film electrode

Procedures for trace cobalt determinations by adsorptive stripping voltammetry at in situ and ex situ plated bismuth film electrodes are presented. These exploit the enhancement of the cobalt peak obtained by using the Co(II)–dimethylglyoxime–cetyltrimethylammonium bromide–piperazine-N,N-bis(2-ethanesulfonic acid) system. The calibration graph for an accumulation time of 120 s was linear from 2 × 10^–10 to 2 × 10^–8 mol L^–1. The relative standard deviation from five determinations of cobalt at a concentration of 5 × 10^–9 mol L^–1 was 5.2%. The detection limit for an accumulation time of 300 s was 1.8 × 10^–11 mol L^–1. The proposed procedure was applied to cobalt determination in certified reference materials and in tap and river water samples.     

Creation of highly functional thin films using electrochemical nanotechnology

This overview describes the results of our recent study of the application of electrochemical nanotechnology to the fabrication of magnetic recording materials, interconnects in ultra-large-scale integrated (ULSI) devices, energy storage materials, and on-chip biosensors. It is important to note that electrochemical processes play significant roles in developing and fabrication such sophisticated materials and devices. In the field of magnetic recording, electrodeposition methods for preparing CoNiFe and CoFe soft magnetic thin films with a high saturation magnetic flux density were newly developed, and the significant issues for obtaining those films are highlighted. In the area of ULSI interconnects, we developed a technique using a self-assembled monolayer (SAM) for direct bonding of the interconnect layer to SiO2, and proposed a novel electroless deposition method for fabricating a diffusion barrier layer. In the field of batteries, electrodeposited SnNi alloy was proposed as a future anode material for Li batteries, and electrochemical MEMS processes were shown to be useful for fabricating micro-sized direct methanol fuel cells (DMFCs) as portable batteries for electronics applications. In the area of chemical sensors, we developed a new process for fabricating field effect transistors (FETs) modified with SAMs for on-chip biosensing applications.     

Electroless preparation and electrochemical behavior of a platinum-doped nickel hexacyanoferrate film–zinc modified electrode: catalytic ability of the electrode for electrooxidation of methanol

The use of a zinc substrate as an electrode and the modification of its surface by means of a thin film of platinum-doped nickel hexacyanoferrate (Pt-NiHCF) were developed. The modification conditions of the zinc surface including the electroless deposition of metallic nickel on the electrode surface from NiCl₂ solution, chemical derivatization of the deposited nickel to the NiHCF film in 0.5 M K₃[Fe(CN)₆] solution, and electrochemical penetration of metallic platinum into the modified film are described. The modified zinc electrodes prepared under optimum conditions show a well-defined redox couple due to the [Ni^IIFe^III/II(CN)₆]^1–/2– system. The effects of pH, the alkali metal cation, and the anion of the supporting electrolyte on the electrochemical characteristics of the modified electrode were studied in detail. The diffusion coefficients of hydrated alkali metal cations in the film (D), the transfer coefficient (), and the transfer rate constant for the electron (k_s) were calculated in the presence of some alkali metal cations. The electrocatalytic activity of the modified electrode for methanol oxidation was demonstrated. The stability of the modified electrode under various experimental conditions was investigated.     

多嵌段聚醚氨酯脲为基质的新型高分子固态离子导体

本文合成了一系列聚乙二醇型多嵌段聚醚氨酯脲，而且用这类聚醚氨酯甩与高氯酸锂制得了一种新型的高分子固态离子导体复合物。在室温和50℃之间，其电导率比聚环氧乙烷为基质的固体电解质的高一到二个数量级，它还具有优良的综合性能。因此，对于室温薄膜蓄电池来说，这种新型的固体电解质是一类良好的候选材料。     

医用聚氯乙烯膜的等离子体表面改性

用两种不同气氛的辉光放电等离子体工艺对医用软质聚氯乙烯（ＰＶＣ）膜进行了表面改性研究。结果表明，聚合性气氛的等离子体改性效果明显优于非聚合性气氛。平整致密的聚合膜对ＰＶＣ增塑剂——邻苯二甲酸二辛酯的迁移和扩散起了阻挡作用，也使膜表面亲水性和表面张力极性成份增大，液固相界面张力减小，生物相容性得以改善。