Surface roughness influence on the pull-in voltage of microswitches in presence of thermal and quantum vacuum fluctuations

In this work we investigate the influence of the combined effect from random self-affine roughness, finite conductivity, and finite temperature on the pull-in voltage in microswitches influenced by thermal and quantum vacuum fluctuations through the Casimir force and electrostatic forces. It is shown that for separations within the micron or sub-micron range the roughness influence plays a dominant role, while temperature starts to show its influence well above micron separations. Indeed, increasing the temperature leads to higher pull-in voltages since it leads to an increased Casimir force. The temperature influence is more significant for relatively large roughness exponent H ∼ 1, while its influence is significantly lower with increasing lateral roughness correlation length ξ or due to long wavelength surface smoothness.     

Auxiliary probe design adaptable to existing probes for remote detection NMR, MRI, and time-of-flight tracing

A versatile, detection-only probe design is presented that can be adapted to any existing NMR or MRI probe with the purpose of making the remote detection concept generally applicable. Remote detection suggests freeing the NMR experiment from the confinement of using the same radio frequency (RF) coil and magnetic field for both information encoding and signal detection. Information is stored during the encoding step onto a fluid sensor medium whose magnetization is later measured in a different location. The choice of an RF probe and magnetic field for encoding can be made based solely on the size and characteristics of the sample and the desired information quality without considering detection sensitivity, as this aspect is dealt with by a separate detector. While early experiments required building probes that included two resonant circuits, one for encoding and one for detection, a modular approach with a detection-only probe as presented here can be used along with any existing NMR probe of choice for encoding. The design of two different detection-only probes is presented, one with a saddle coil for milliliter-sized detection volumes, and the other one with a microsolenoid coil for sub-microliter fluid quantities. As example applications, we present time-of-flight (TOF) tracing of hyperpolarized (129)Xe spins in a gas mixture through coiled tubing using the microsolenoid coil detector and TOF flow imaging through a nested glass container where the gas flow changes its direction twice between inlet and outlet using the saddle coil detector.     

自然地面背景下红外目标检测算法

为了快速准确地检测出以地面物体为背景的红外序列图像中的目标,结合小波变换的特点及其应用于图像边缘检测的优点,提出了一种基于小波技术的图像预处理算法。该方法利用图像边缘在目标识别中的重要作用,讨论了基于小波变换的图像边缘检测方法,并结合地面背景红外图像自身的特点,大大地提高了单帧的检测概率。     

Proposition of Single Molecular Orientation Determination Using polarization Controlled Beam by Liquid Crystal Spatial Light Modulators

We have proposed a method to control the three-dimensional electric field in the focus of an optical microscope using two non-twisted liquid crystal spatial light modulators, and to detect the molecular orientation of a single molecule. The three-dimensional electric field is generated by focusing the beam with two dimensional spatial distribution of polarization. The possibility of detection of three-dimensional single molecular orientation was shown by numerical calculations. © 2005 The Optical Society of Japan     

Trace Detection of Low Concentrations of Ozone Using a CO<Subscript>2</Subscript> Laser with Automatic Tuning over the Spectrum

A technique of detection of ozone, using a CO₂ laser with rapid automated tuning over 8–10 generation lines in the 9.4–9.6-µm spectral range, has been developed. Its experimental verification has shown a higher accuracy of detecting low concentrations of O₃ in comparison with the traditional technique of differential absorption on two lines (on-line and off-line). Using the technique suggested, the content of ozone in the vicinity of city roads with heavy traffic has been measured.__________Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 72, No. 2, pp. 251–255, March–April, 2005.     

类Liu系统在水声微弱信号检测中的应用研究

利用三阶混沌系统构造了一种新的微弱信号检测系统——类Liu系统, 对类Liu 系统进行了深度的理论分析. 类Liu系统中, 当输入待测信号幅值大于某临界值时, 系统可达到平衡点S₀, S₀中系统变量x平衡于摄动力信号, 系统变量y, z收敛于零态, 且S₀ 对应的Lyapunov指数小于零. 通过Matlab仿真、Multisim电路仿真以及实际电路证明了类Liu系统的周期态收敛性及广域检测性, 解决了传统Duffing系统进行微弱信号检测时周期态不收敛、只能进行窄域检测等问题, 同时谱级信噪比范围仍可达-46.57 dB. 类Liu系统采用了全新的设计理念, 具有较高的实用价值, 对未来海洋物联网中的水声通信有一定参考价值.     

Detecting itinerant single microwave photons

Single-photon detectors are fundamental tools of investigation in quantum optics and play a central role in measurement theory and quantum informatics. Photodetectors based on different technologies exist at optical frequencies and much effort is currently being spent on pushing their efficiencies to meet the demands coming from the quantum computing and quantum communication proposals. In the microwave regime, however, a single-photon detector has remained elusive, although several theoretical proposals have been put forth. In this article, we review these recent proposals, especially focusing on non-destructive detectors of propagating microwave photons. These detection schemes using superconducting artificial atoms can reach detection efficiencies of 90% with the existing technologies and are ripe for experimental investigations.     

利用偏振度研究混合目标的混合比

提出一种利用偏振度研究混合目标混合比的新方法。通过建立混合目标模型将混合目标散射光的偏振度与混合目标的混合比建立直接的关系,在理论上得到了混合目标混合比分别与混合目标偏振度和归一化偏振度之间的数值关系,并且进一步给出了混合目标混合比由归一化偏振度的反演结果,为研究混合目标提供了新的思路与方法,对偏振度探测混合目标的实验以及工程应用都有重要的理论意义。     

基于经典小波变换的布里渊光时域反射计光信号处理

布里渊光时域反射计结构的布里渊散射分布式光纤传感器检测的是自发散射光,信号非常微弱,而且频带在几十兆赫兹以上,难以应用普通相干解调方法。针对传感散射光信号特点,提出基于经典(Morlet)小波变换的光相干检测方法。首先采用微波电光调制产生频移参考光和自发布里渊散射光进行相干检测,再应用经典小波变换进行散射光信号的幅度解调,得到信噪比改善的布里渊散射传感光信号。给出了数值模拟和实验数据处理结果,表明经典小波变换能较好地处理布里渊光时域反射计检测信号。并和基于希尔伯特(Hilbert)变换的传感信号处理方法进行了对比,发现此方法优于基于希尔伯特变换的信号处理。     

钢铁检测微型光谱仪的研制

针对国内光电直读型钢铁检测微型光谱仪研究的不足,提出基于Czerny-Turner结构的系统设计方法,讨论了优化方法及验证方法,并加工出了光谱仪。光谱仪采用三次多项式拟合标定波长,实测分辨率在436 nm~608 nm全谱段达0.225 nm、中心谱段达0.135 nm,基本满足钢铁检测要求。提出一种基于多帧判断的定性分析方法,7种待测元素检出限优于1.5%,通过建立拟合光谱数据库实现半定量分析,25种样品检测精度达2%,为钢铁牌号识别提供重要参考。