Synthesis, Crystal Structure, UV-vis and EPR Studies of（ NH3CH2CH2NH2 ） 2.5 [ Mo0.5^（V）W0.5^（VI）O2 （ OC6H4O ） 2]

Cis-dioxo-metal complex ( NH3CH2CH2NH2 ) 2.5 [ Mo0.5^(V)W0.5^(VI)O2 ( OC6H4O ) 2] 1 was obtained by the reaction of tetra-butyl ammonium hexamolybdotungstate with 1, 2-dihydroxybenzene in the mixed solvent of CH3OH, CH3CN and ethylenediamine,and characterized by X-ray diffraction, UV-vis and EPR analysis. Compared with its analogous complexes (NH3CH2CH2NH2)3[Mo^(V)O2(OC6H40)2] 2 and (NH3CH2CH2NH2)2[W^(VI)O2(OC6H4O)2] 3, the results show that tungsten(VI) is less active in redox than molybdenum (VI) and that the change of the valence induced by substitution of W(VI) for Mo(V) in EMO2(OC6H40)2]n- does not influence the coordination geometry of the complex anion in which the metal center exhibits distorted octahedral coordination with cis-dioxo catechol. The responses to EPR of complexes 1 and 2 are active but complex 3 is silent,and the UV-vis spectra exhibited by the three complexes are obvious different because of the different electronic configuration between the central Mo(V) and W(VI) ions in the complexes.It is noteworthy that complexes 1 and 2 have the similar EPR signal to flavoenzyme, suggesting that the three complexes have the same coordination geometry feature with the co-factor of flavoenzyme.     

Fe3+/V5+/TiO2复合纳米微粒光催化性能的研究

采用溶胶凝胶法制备了Fe^3 /V^5 /TiO2复合纳米微粒作为光催化剂。光降解反应结果表明，其掺杂催化剂Fe^3 /V^5 /TiO2的光催化活性明显提高。光电化学研究显示，铁离子可以成为电荷陷阱，促进空穴的界面传递反应。适量钒离子掺杂使TiO2电极的光电流升高，导带中电子浓度的增大，加快了界面的电子传递反应。共掺杂催化剂中，Fe^3 、V^5 分别提供了空穴与电子的陷阱，同时加快了电子与空穴的界面传递反应，从 更有效地提高光催化活性。双组份共掺杂为提高TiO2光催化活性提供新的途径。     

Stimulated Raman scattering measurements of H2 vibration–vibration transfer

We present a new set of V–V rate coefficients for vibrational levels 0–5 in H₂ at 300 K, measured using a stimulated Raman–spontaneous Raman pump/probe apparatus. The measured rate of the non-resonant process, H₂(v = 1) + H₂(v = 1) → H₂(v = 0) + H₂(v = 2), is consistent with the previously reported experimental value of Kreutz et al. However, semi-classical predictions of such non-resonant processes, using the identical inter-molecular potential and methodology to that given by Cacciatore and Billing, results in rates which are too slow, by a factor of approximately 3. For the “resonant” V–V process, H₂(v = 1) + H₂(v = 0) → H₂(v = 0) + H₂(v = 1), the semi-classical rate is found to be too slow by an even larger factor, of approximately 30, compared to the experimental rate, but consistent with the previously reported experimental result of Farrow and Chandler. Further, unlike the semi-classical model prediction in which the (1, 1 → 2, 0) process rate is predicted to exceed that of the (1, 0 → 0, 1) process, the experimental data shows it to be a factor of approximately 2.5 less, suggesting that semi-classical methods that treat the rotational motion classically are unsuitable for the highly anharmonic H₂ molecule. The ratio of pure rotation and rotation–vibration Raman cross sections for scattering from levels 0 and 1 is also determined, with results which agree with calculations of Schwartz and LeRoy, but are somewhat larger than previous experimental results of Cureton.     

First 13C‐NMR Assignments of Betaxanthins

Due to their inherent liability towards highly acidic conditions previously considered to be a prerequisite for data acquisition, betaxanthin structure dereplication by NMR spectroscopy has been scarcely reported and was, hitherto, exclusively based on ¹H‐NMR data interpretation. Applying only slightly acidic conditions, we herein report the first ¹³C‐NMR data of two betaxanthins, i.e., indicaxanthin ( 1 ), isolated from yellow‐orange cactus pear fruits (Opuntia ficus‐indica [L.] Mill . cv. ‘Gialla’), and of miraxanthin V ( 2 ) from yellow Swiss chard petioles (Beta vulgaris L. ssp. cicla [L.] Alef . cv. ‘Bright Lights’), as derived by gHSQC‐ and gHMQC‐NMR experiments and inverse detection.     

铜掺杂五氧化二钒的制备及电化学性质

采用沉淀法于300 和600 ℃制备了结晶状的Cu0.04V2O5材料. 扫描电镜显示, 300 ℃时制备的样品具有多孔特征, 而600 ℃时制备的样品具有很高的结晶度. X射线研究表明, 少量铜掺杂不会改变V2O5的正交晶体结构. 红外光谱研究表明, 300 ℃时制备的Cu0.04V2O5样品含有少量水. 热失重分析确定了样品中所含水分是以吸附水的形式存在, 1 mol材料分子吸附水的摩尔数约为0.18 mol. 铜掺杂显著改善了V2O5的结构稳定性, 进而提高了材料的充放电循环性能. 于600 ℃制备的样品在C/5.6倍率下具有160 mAh·g-1的可逆比容量, 但提高放电倍率明显降低了材料的循环性能. 于300 ℃制备的样品在C/5.6倍率时的循环性能不如600 ℃样品, 但该材料在C/1.9倍率时仍具有100 mAh·g-1左右的可逆比容量. 两种材料在电化学性能上的差异与材料的微结构有关. 低温样品在较高放电倍率时良好的循环性能得益于其多孔的微结构, 而高温样品由于其较高的结晶度而表现出优异的低倍率充放电性能.     

KINETICS OF POLYMERIZATION OF ACRYLONITRILE INITIATED BY VANADIUM(V)-THIOUREA REDOX SYSTEM

The kinetics of polymerization of acrylonitrile (AN) initiated by quinquevalent vanadium (V~(5+))-thiourea (TU) redox system has been investigated in aqueous nitric acid in the temperature range from 30 to 50℃. The polymerization rate (R_p) can be expressed as follows: In the copolymerization of acryionitrile with methyl acrylate (MA), the reactivity ratios were found to be 1.0 and 1.1, respectively. The experimental observations suggest that the initiating species is probably a complex consisting of a central ion of Lewis acid-VO_2~+ and the ligands of Lewis bases-acrylonitrile, thiourea, and nitrate anions, while the initiating system in lower concentration, the polymerization of acrylonitrile does not occur if the thiourea is acidified prior to its reaction with quinquevalent vanadium. This indicates that the primary radicals (or the monomeric radicals in the present article) are produced by associated thiourea rather than isothlourea.     

Hybrid electron cyclotron resonance-radio-frequency plasma etching of III–V semiconductors in Cl2-based discharges. Part I: GaAs and related compounds

A systematic study has been performed of the dry etching characteristics of GaAs, Al_0.3Ga_0.7As, and GaSb in chlorine-based electron cyclotron resonance (ECR) discharges. The gas mixtures investigated were CCl₂F₂/O₂, CHCl₂F/O₂, and PCl₃. The etching rates of all three materials increase rapidly with applied RF power, while the addition of the microwave power at moderate levels (150 W) increases the etch rates by 20–80%. In the microwave discharges, the etch rates decrease with increasing pressure, but at 1 m Torr it is possible to obtain usable rates for self-bias voltages 100 V. Of the Freon-based mixtures, CHCl₂F provides the least degradation of optical (photoluminescence) and electrical (diode ideality factors and Schottky barrier heights) properties of GaAs as a result of dry etching. Smooth surface morphologies are obtained on all three materials provided the microwave power is limited to 200 W. Above this power, there is surface roughening evident with all of the gas mixtures investigated.     

Self-assembly in dinuclear, cyclic homotetranuclear and cyclic heterotetranuclear complexes with a picolylhydrazone ligand

Reactions among Cu(ClO₄)₂ · 6H₂O, Cu(acac)₂/VO(acac)₂ and 3-methoxysalicylaldehyde Picoloylhydrazone in different solvents give three complexes, [Cu₂L(acac)(H₂O)₂]ClO₄ (1), [Cu₄L₂(acac)₂(py)₂](ClO₄)₂ (2) and (VO₂)₂L₂Cu₂(acac)₂ (3) (acac = acetyl acetonate and py = pyridine). There is an extended 2D structure in complex 1 constructed by hydrogen bonds between the binuclear complex cation and the ClO₄⁻ anion, and an extended 1D structure in complex 2 constructed by weak ππ stacking interactions between neighboring cyclic tetranuclear complex molecules. Complex 3 is the first oxovanadium–copper complex with a bridging oxo oxygen atom between the V atom and the Cu atom. The solid-state photoluminescent properties of the three title complexes have been studied. There is an antiferromagnetic interaction in 1.     

One site fits both: A model for the ternary complex of folate + NADPH in R67 dihydrofolate reductase, a D2 symmetric enzyme

R67 dihydrofolate reductase (DHFR) is a novel enzyme that confers resistance to the antibiotic trimethoprim. The crystal structure of R67 DHFR displays a toroidal structure with a central active-site pore. This homotetrameric protein exhibits 222 symmetry, with only a few residues from each chain contributing to the active site, so related sites must be used to bind both substrate (dihydrofolate) and cofactor (NADPH) in the productive R67 DHFR?NADPH?dihydrofolate complex. Whereas the site of folate binding has been partially resolved crystallographically, an interesting question remains: how can the highly symmetrical active site also bind and orient NADPH for catalysis? To model this ternary complex, we employed DOCK and SLIDE, two methods for docking flexible ligands into proteins using quite different algorithms. The bound pteridine ring of folate (Fol I) from the crystal structure of R67 DHFR was used as the basis for docking the nicotinamide-ribose-P_i (NMN) moiety of NADPH. NMN was positioned by both DOCK and SLIDE on the opposite side of the pore from Fol I, where it interacts with Fol I at the pore's center. Numerous residues serve dual roles in binding. For example, Gln 67 from both the B and D subunits has several contacts with the pteridine ring, while the same residue from the A and C subunits has several contacts with the nicotinamide ring. The residues involved in dual roles are generally amphipathic, allowing them to make both hydrophobic and hydrophilic contacts with the ligands. The result is a `hot spot' binding surface allowing the same residues to co-optimize the binding of two ligands, and orient them for catalysis.