一种新型偶氮染料在扭曲向列相液晶显示取向中的应用

研究了一种新型偶氮材料sy03在光控取向中的应用。将sy03加入聚酰亚胺SE-3310(Nissan)与N,N-二甲基甲酰胺(DMF)的混合溶液中作为90°扭曲向列相液晶显示(Twisted nematic liquid crystal display,TN-LCD)的光取向材料,测量由它作为取向膜的扭曲向列型盒的电光特性与仅用SE-3310取向的扭曲向列型盒电光特性比较,发现sy03偶氮的加入使得扭曲向列型盒的响应时间短到98 ms、阈值电压也降低到1.7 V左右。而且随曝光时间的增加,响应时间和衬比度都有所提高,电光响应曲线也更为陡峭。加热到150℃后,其电光特性并没有明显变化,证明了它良好的热稳定性。最后通过测量偏振紫外吸收光谱,分析得出液晶分子易取向方向与激发光源偏振方向垂直。     

热固性聚酰亚胺基体树脂的流变行为

热固性聚酰亚胺基体树脂的流变行为;聚酰亚胺;二苯醚二酐;二苯硫醚二酐;苯乙炔苯酐;流变     

Photo-alignment Property of Azobenzene-containing Polyimide Films Swollen by Alkyl-amine

Photo-alignment efficiency of polyimide containing azobenzene in the backbone structure (Azo-PI) is significantly enhanced by exposing the precursor (polyamic acid: Azo-PAA) film to alkyl-amine vapor prior to photo-alignment. In this study, we have investigated the relationships between the alkyl-amine vapor treatment time, the swelling ratio of Azo-PAA films, and the photo-induced in-plane anisotropy. We found that: the Azo-PAA film swells on exposure to alkyl-amine vapor, and the swelling finally saturates; and the photo-induced in-plane anisotropy is correlated very closely with the swelling ratio. In addition, we pointed out the importance of the process order of alkyl-amine vapor treatment and photo-alignment.     

Porphyrin‐containing Polyimide with Enhanced Light Absorption and Photocatalysis Activity

A series of porphyrin‐containing polyimide (PI) photocatalysts were synthesized by a one‐step solvothermal method. Characterization results revealed that porphyrin was uniformly coupled into the PI framework through covalent bonding and the visible‐light absorption was greatly improved. The photodegradation activity of porphyrin‐containing PIs for methyl orange (MO) under visible light was enhanced significantly, with the highest pseudo‐first‐order rate constant 35 times higher than that of neat porphyrin and 10 times higher than that of porphyrin‐free PI. The enhancement is mainly attributed to an increased light harvesting accompanied by a varied HOMO level, which was clarified by control experiments, characterizations and theoretical calculations. This work provides an insight into multiple effects of dye molecules in dye‐containing heterogeneous photocatalysts.     

Thermal cross-link between 2,5-furandicarboxylic acid-based polyimides and bismaleimide via Diels–Alder reaction

A series of cross-linked polyimides (PIs) were prepared via two-step solution polycondensation from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride (BPADA) and 2,5-furandicarboxylic acid-based diamines, N,N′-bis(4-amino-2-(trifluoromethyl)phenyl)furan-2,5-dicarboxamide (TFFDA) and N,N′-bis(4-aminophenyl)furan-2,5-dicarboxamide (p-FDDA), followed by thermal crosslinking reaction with bismaleimide. The thermal crosslinking reaction and its mechanism were studied by FTIR spectra and model reaction analysis, which showed Diels–Alder reaction between furan group and maleimide group played a main role in the thermal treatment. The properties of cross-linked PIs were characterized using dynamic mechanical thermal analysis, thermogravimetric analyses, tensile testing, ultraviolet-visible spectra, and wide-angle X-ray diffraction. The cross-linked polyimide film showed improved solvent-resistance, thermal and mechanical properties with T_g values of 234–306^oC, tensile strengths of 82–98 MPa and moduli of 2.3–3.0 GPa.     

Nonvolatile write‐once read‐many‐times memory behaviors of polyimides containing tetraphenyl fluorene core and the pendant triphenylamine or carbazole moieties

To better understand the structure–property relationships, two novel aromatic diamines containing tetraphenyl fluorene (TPF) moiety through triphenylamine (TPA) unit and carbazole (Cz) unit modification are designed and synthesized, respectively. Four thermally stable and excellent solubility polyimides are prepared and characterized. The excellent film‐formation ability and thin film stability are investigated by X‐ray diffraction (XRD) and atom force microscopy (AFM) measurements, respectively. The memory devices are fabricated, PIs films with low water uptakes sandwiched between indium‐tin oxide (ITO) ground electrode and Al top electrode, and exhibit nonvolatile write‐once read‐many‐times (WORM) memory behaviors with low threshold voltages, due to increasing the retention time through regulating the energy level. The current conduction mechanisms of all devices are linearly fitted by theoretical conduction model. Molecular simulations are used to demonstrate switching mechanism and the memory effects. The experimental results provide a sight for the design‐adjustable switching voltage of memory devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1630–1644     

Sorption and pervaporation properties of crosslinked membranes of poly(ethylene oxide imide) segmented copolymer to aromatic/nonaromatic hydrocarbon mixtures

Poly(ethylene oxide imide) segmented copolymer (PEO‐PI) membranes were crosslinked by the chemical reaction between ethylene glycol diglycidyl ether and benzylalcohol groups of diamine moieties in polyimide segments at high temperatures. Sorption and diffusion of penetrants took place in poly(ethylene oxide) segment microdomains. Sorption and desorption behavior of pure vapors such as benzene (Bz), cyclohexane (Cx) and n‐hexane (Hx) was classified as the Fickian diffusion. Sorption isotherms of binary liquid mixtures could be represented by the Flory–Rehner model, but the model overpredicted the sorption amounts of Cx and Hx, leading to small predictions of sorption selectivity α_S for Bz/Cx and Bz/Hx systems. UNIFAC‐FV model fairly well predicted the sorption amounts of aromatic hydrocarbons, but significantly overestimated those of nonaromatic ones, leading to too small predictions of α_S. Pervaporation (PV) behavior of PEO‐PI membranes was governed by sorption behavior followed by membrane swelling. Diffusion coefficient weakly depended on the minimum cross section of a penetrant. The diffusivity selectivity α_D hardly depended on the feed composition and was about 1.4 and 0.75 for Bz/Cx and Bz/Hx, respectively. PV selectivity α_PV was larger for Bz/Hx than for Bz/Cx because of larger α_S. PEO‐PI membranes displayed high specific permeation flux Ql and reasonably high α_PV for aromatic/nonaromatic hydrocarbons; for example, Ql = 60 Kg μm/(m² h) and α_PV = 8 for a feed mixture containing Bz, Tol, Hx, n‐Ot and i‐Ot of 20 wt % at 353 K. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1800–1811, 2000     

Synthesis,characterization of naphthalene‐based polyimides,and their use as immobilized enzyme membrane

A new monomer, 1,5‐bis(p‐dimethylaminophenylimino)naphthalene, was prepared through Schiff‐base condensation reaction of 1,5‐diaminonaphthalene and 4‐(dimethylamino)benzaldehyde in the presence of ethanol. A series of aromatic polyimides bearing naphthalene and ? CH?N? groups were synthesized from the diamine with five kinds of commercial dianhydrides via a conventional one‐stage process. The resulting naphthalene based polyimides (NBPs) showed good solubilities in N‐methyl‐2‐pyrrolidone and m‐cresol. NBPs had glass‐transition temperatures at 139–174°C and 10% weightloss temperatures above 430 °C in nitrogen atmospheres. Excellent properties of NBPs are attributed to the incorporation of the naphthalene and ? CH?N? group in 1,5‐bis(p‐dimethylaminophenylimino)naphthalene. Moreover, chemically prepared polyimides were used for immobilization of glucose oxidase (GOx). The amperometric responses of the NBPs‐GOx‐Pt electrodes toward glucose were examined at a potential of 0.7 V in PBS solution by means of time‐base (TB) technique. Results show that NBPs bearing ? O? group membrane (PI‐3) has many advantages in the immobilization of glucose oxidase because of its strong adherence to electrode surface and chemical stability and selectivity. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of fluorine functionalized graphene oxide dispersed quinoline-based polyimide composites having low-k and UV shielding properties

Polyimide nanocomposites having low-k and UV shielding properties have been developed using fluorine functionalized graphene oxide and bis(quinoline amine) based polyimide. The polyimide was synthesized using bis(quinoline amine) and pyromellitic dianhydride at appropriate experimental conditions, and its molecular structure was confirmed through various spectral analysis such as FTIR and NMR. The polyimide (PI) composites were prepared using bis(quinoline amine), pyromellitic dianhydride, and separately filled with 1, 5, 10 wt% of fluorinated graphene oxide (FGO) through in situ polymerization. The polymer composites were characterized using thermo gravimetric analysis (TGA), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). In addition, the water contact angle, dielectric behavior, and UV–Vis shielding behavior of FGO/PI composites were evaluated. The value of the water contact angle of the polyimide was increased with increment of FGO in the polyimide matrix. The highest water contact angle of polyimide composites observed 108° was obtained for 15 wt% FGO reinforced polyimide composite. The value of the dielectric constant for neat, 1, 5, and 15 wt% FGO reinforced polyimide composites was obtained as 4.5, 3.7, 2.6, and 2.0, respectively. It is also observed from by UV–Vis spectroscopy analysis that the FGO reinforced polyimide composites have good UV shielding behavior.     

Homopolyimides containing both benzimidazole and benzoxazole with high Tg and low coefficient of thermal expansion

A pair of isomer diamines containing both benzimidazole and benzoxazole and derived homopolyimides were synthesized for the first time. Due to rich rigid and linear benzoazole units, as well as the strong intermolecular interactions from the hydrogen bonding and the charge transfer complexation (CTC), the obtained polyimides (PIs) exhibited outstanding thermal properties, including high thermal weight loss temperature (T_d5% = 540–561°C), high glass transition temperature (T_g = 392–421°C), and low coefficient of thermal expansion (CTE = 1.3–20.9 ppm/°C). In addition, the obtained PIs also showed ideal mechanical properties (T_S = 189–240 MPa, T_M = 4.1–5.0 GPa and E_B = 2.9%–4.7%). These potential novel PI films with high T_g and low CTE were expected to be applied to next generation of flexible display substrate material.