Frequency and voltage-dependent electrical and dielectric properties of Al/Co-doped PVA/p-Si structures at room temperature

In order to investigate of cobalt-doped interracial polyvinyl alcohol （PVA） layer and interface trap （Dit） effects, A1/p- Si Schottky barrier diodes （SBDs） are fabricated, and their electrical and dielectric properties are investigated at room temperature. The forward and reverse admittance measurements are carded out in the frequency and voltage ranges of 30 kHz-300 kHz and -5 V-6 V, respectively. C-V or er-V plots exhibit two distinct peaks corresponding to inversion and accumulation regions. The first peak is attributed to the existence of Dit, the other to the series resistance （Rs）, and interfacial layer. Both the real and imaginary parts of dielectric constant （er and err） and electric modulus （Mr and Mrr）, loss tangent （tan~）, and AC electrical conductivity （aac） are investigated, each as a function of frequency and applied bias voltage. Each of the M~ versus V and Mrr versus V plots shows a peak and the magnitude of peak increases with the increasing of frequency. Especially due to the Dit and interfacial PVA layer, both capacitance （C） and conductance （G/w） values are strongly affected, which consequently contributes to deviation from both the electrical and dielectric properties of A1/Co-doped PVA/p-Si （MPS） type SBD. In addition, the voltage-dependent profile of Dit is obtained from the low-high frequency capacitance （CLF-CHF） method.     

Filling the Charge–Discharge Voltage Gap in Flexible Hybrid Zinc-Based Batteries by Utilizing a Pseudocapacitive Material

The high charge–discharge voltage gap is one of the main bottlenecks of zinc–air batteries (ZABs) because of the kinetically sluggish oxygen reduction/evolution reactions (ORR/OER) on the oxygen electrode side. Thus, an efficient bifunctional catalyst for ORR and OER is highly desired. Herein, honeycomb-like MnCo₂O_4.5 spheres were used as an efficient bifunctional electrocatalyst. It was demonstrated that both ORR and OER catalytic activity are promoted by Mn^IV-induced oxygen vacancy defects and multiple active sites. Importantly, the multivalent ions present in the material and its defect structure endow stable pseudocapacitance within the inactive region of ORR and OER; as a result, a low charge–discharge voltage gap (0.43 V at 10 mA cm⁻²) was achieved when it was employed in a flexible hybrid Zn-based battery. This mechanism provides unprecedented and valuable insights for the development of next-generation metal–air batteries.     

Optimal feedback gains of a delayed proportional-derivative (PD) control for balancing an inverted pendulum

In the dynamics analysis and synthesis of a con-trolled system, it is important to know for what feedback gains can the controlled system decay to the demanded steady state as fast as possible. This article presents a sys-tematic method for finding the optimal feedback gains by taking the stability of an inverted pendulum system with a delayed proportional-derivative controller as an example. First, the condition for the existence and uniqueness of the stable region in the gain plane is obtained by using the D-subdivision method and the method of stability switch. Then the same procedure is used repeatedly to shrink the stable region by decreasing the real part of the rightmost charac-teristic root. Finally, the optimal feedback gains within the stable region that minimizes the real part of the rightmost root are expressed by an explicit formula. With the optimal feedback gains, the controlled inverted pendulum decays to its trivial equilibrium at the fastest speed when the initial val-ues around the origin are fixed. The main results are checked by numerical simulation.     

A new coding scheme of QC-LDPC codes for optical transmission systems

Based on Galois Field (GF(q)) multiplicative group, a new coding scheme for Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes is proposed, and the new coding scheme has some advantages such as the simpler construction, the easier implementation encoding, the lower complexity of the encoding and decoding, the more flexible adjustment of the code length as well as the code rate and so forth. Under the condition of considering the characteristics of optical transmission systems, an irregular QC-LDPC (3843,3603) code to be suitable for optical transmission systems is constructed by applying the proposed new coding scheme. The simulation result shows that the net coding gain (NCG) of the irregular QC-LDPC (3843,3603) code is respectively improved 2.14 dB, 1.19 dB, 0.24 dB and 0.14 dB more than those of the classic RS (255,239) code in ITU-T G.975, the LDPC (32640,30592) code in ITU-T G.975.1, the regular SCG-LDPC (3969,3720) code constructed by the Systematically Constructed Gallager (SCG) coding scheme and the regular QC-LDPC (4221,3956) code at the bit error rate (BER) of 10-8. Furthermore, all the five codes have the same code rate of 93.7%. Therefore, the irregular QC-LDPC (3843,3603) code constructed by the proposed new coding scheme has the more excellent error-correction performance and can be better suitable for optical transmission systems.     

Toward a universal quantum QSPR operator

This article presents a discussion about the formalism, which might be associated to a general Quantum quantitative structure–properties relations operator, appearing in a Boltzmann‐like exponential form, which is based in turn on the definition of the concept of thermal voltage, applied to thermally scaled electronic density functions. Three practical numerical examples are presented, corresponding to the calculation of the polarization angle in assorted chiral molecules, the estimation of fish toxicity for perchlorobenzene within the set of chlorobenzenes and a typical quantum QSAR study on the popular Cramer steroid set.     

Monodisperse Six-Armed Starbursts based on Truxene-Cored Multibranched Oligofluorenes: Design,Synthesis, and Stabilized Lasing Characteristics

A series of monodisperse six-armed conjugated starbursts ( Tr1F , Tr2F , and Tr3F ) containing a truxene core and multibranched oligofluorene bridges capped with diphenylamine (DPA) units has been designed, synthesized, and investigated as robust gain media for organic semiconductor lasers (OSLs). The influence of electron-rich DPA end groups on their optoelectronic characteristics has been discussed at length. DPA cappers effectively raise HOMO levels of the starbursts, thus enhancing the hole injection and transport ability. Solution-processed electroluminescence devices based on the resulting six-armed starbursts exhibited efficient deep-blue electroluminescence with clear reduced turn-on voltages (3.2–3.5 V). Moreover, the resulting six-armed molecules showed stabilized electroluminescence and amplified spontaneous emission with low thresholds (27.4–63.9 nJ pulse⁻¹), high net gain coefficients (80.1–101.3 cm⁻¹), and small optical loss (2.6–4.4 cm⁻¹). Distributed feedback OSLs made from Tr3F exhibited a low lasing threshold of 0.31 kW cm⁻² (at 465 nm). The results suggest that the construction of truxene-centered six-armed conjugated starbursts with the incorporation of DPA units can effectively enhance EL properties by precisely regulating the HOMO energy levels, and further optimizing their optical gain properties.     

Design of robust differential microphone arrays with the Jacobi–Anger expansion

Due to their small size, differential microphone arrays (DMAs) are very attractive. Moreover, they have been effective in combating noise and reverberation. Recently, a new class of DMAs of different orders have been developed with the MacLaurin’s series and the frequency-independent patterns. However, the MacLaurin’s series does not approximate well the exponential function, which appears in the general definition of the beampattern, when the intersensor spacing is not small enough. To circumvent this problem, we propose in this paper to approximate the exponential function with the Jacobi–Anger expansion. Based on this approximation and the frequency-independent Chebyshev patterns, we derive first-, second-, and third-order DMAs. Furthermore, in order to improve the robustness of DMAs against white noise amplification, we propose to use more microphones combined with minimum-norm filters. It is also shown that the Jacobi–Anger expansion is optimal from a mean-squared error perspective. Simulations are carried out to evaluate the performance of the proposed DMAs.     

Solution-Processable Low Voltage Organic Transistors of Thieno[3,2-b]thiophene-Based Conducting Polymer

A low-operating voltage and high performance polymeric field effect transistors using octadecylphosphonic acid-treated high-k AlOx and HfO₂ hybrid dielectrics were demonstrated. High-k metal oxide hybrid dielectrics were prepared by oxygen plasma treatment of deposited Al film for AlOx and by spin coating of solution-processable HfO₂ sol-gel solution for HfO₂ in combination with phosphoric acid-based self-assembled monolayer (SAM), resulting in high capacitance (10 nF/cm² for SiO₂, 600 nF/cm² for AlOx and 580 nF/cm² for HfO₂). With phosphoric acid-based SAM on high-k metal oxide and thermal annealing of thieno[3,2-b]thiophene-based conducting polymer, the device performance was significantly enhanced. The highest mobility of the transistors using ODPA-treated AlOx as a gate dielectric is 2.3 × 10^?2 cm² V^?1 s^?1 in the saturation region with the source-drain of ?2 V. In ODPA-treated HfO₂ hybrid dielectric, the saturated mobility is 1.1 × 10^?2 cm² V^?1 s^?1 and the threshold voltage was measured to be ?0.31 V, which is at least one order lower than SiO₂ hybrid dielectric (?3 V).     

STABILITY ANALYSIS OF A CAPACITIVE FGM MICRO-BEAM USING MODIFIED COUPLE STRESS THEORY

Based on the Modified Couple Stress Theory,a functionally graded micro-beam under electrostatic forces is studied.The FGM micro-beam is made of two materials and material properties vary continuously along the beam thickness according to a power-law.Dynamic and static pull-in voltages are obtained and it is shown that the static and dynamic pull-in voltages for some materials cannot be obtained using classic theories and components of couple stress must be taken into account.In addition,it is shown that the values of pull-in voltages depend on the variation through the thickness of the volume fractions of the two constituents.