Effects of composition and transparency on photo and radioluminescence of Y2O3:Eu complexes

A solid state-based method using a hot reaction chamber is applied to the synthesis of Y₂O₃:Eu particles containing Eu from 0 to 5 mol%. The produced powders are studied using X-ray diffraction (XRD), scanning electron microscopy and transmission electron microscopy (TEM), as well as photoluminescence (PL) and radioluminescence tests. TEM and XRD results revealed the powder to be mono-disperse and in the form of a solid solution. The PL of Y₂O₃:Eu powder depends on both the concentration quenching effect (due to an excess of Eu concentration) and the surface luminescence effect (depicted by a higher surface area induced by the large phosphor concentration in the solution or smaller particle sizes). A ²²Na gamma source is used to compare the recorded count rates for four Y₂O₃:Eu scintillator materials with different concentrations of Eu. Each scintillator composition is examined in four forms: solid pellets with a high volume porosity and three aqueous solutions of Y₂O₃:Eu particles of the different scintillator materials at concentrations of 25, 50 and 100 mg/mL. The radioluminescence results indicated that increasing the transparency and/or the amount of Eu mol% of the scintillators increases the net average counts.     

Luminescence studies on rγ-ray-irradiated Dy3+-activated sodium chloride phosphor for radiation dosimetry

The lyoluminescence (LL), thermoluminescence and mechanoluminescence (ML) of a γ -ray-irradiated powder of NaCl:Dy (0.05–0.5 mol%) phosphor are reported in this paper. The nature of intensity variation of the respective luminescence spectra with different γ -ray doses and with different concentrations of Dy³⁺ doped in NaCl are found to be similar. The LL and ML intensities differed from each other, but their nature is found to be similar in a sublinear form up to a high dose (5.0 kGy) of γ -rays. Thus, the prepared phosphor may be useful for accidental radiation dosimetry up to a high dose (5.0 kGy) of γ -rays using the LL and ML techniques.     

Radiation exposure to operator and patients during cardiac electrophysiology study,radiofrequency catheter ablation and cardiac device implantation procedures

The purpose of this study was to measure the radiation exposure to operator and patient during cardiac electrophysiology study, radiofrequency catheter ablation and cardiac device implantation procedures and to calculate the allowable number of cases per year. We carried out 9 electrophysiology studies, 40 radiofrequency catheter ablation and 11 cardiac device implantation procedures. To measure occupational radiation dose and dose–area product (DAP), 13 photoluminescence glass dosimeters were placed at eyes (inside and outside lead glass), thyroids (inside and outside thyroid collar), chest (inside and outside lead apron), wrists, genital of the operator (inside lead apron), and 6 of photoluminescence glass dosimeters were placed at eyes, thyroids, chest and genital of the patient. Exposure time and DAP values were 11.7?±?11.8?min and 23.2?±?26.2?Gy?cm² for electrophysiology study; 36.5?±?42.1?min and 822.4?±?125.5?Gy?cm² for radiofrequency catheter ablation; 16.2?±?9.3?min and 27.8?±?16.5?Gy?cm² for cardiac device implantation procedure, prospectively. 4591 electrophysiology studies can be conducted within the occupational exposure limit for the eyes (150?mSv), and 658-electrophysiology studies with radiofrequency catheter ablation can be carried out within the occupational exposure limit for the hands (500?mSv). 1654 cardiac device implantation procedure can be conducted within the occupational exposure limit for the eyes (150?mSv). The amounts of the operator and patient's radiation exposure were comparatively small. So, electrophysiology study, radio frequency catheter ablation and cardiac device implantation procedures are safe when performed with modern equipment and optimized protective radiation protect equipment.     

Penetrating view of nano-structures in Aleochara verna spermatheca and flagellum by hard X-ray microscopy

A penetrating view of the three-dimensional nanostructure of female spermatheca and male flagellum in the species Aleochara verna is obtained with 100-nm resolution using a hard X-ray microscope, which provides a fast noninvasive imaging technology for insect morphology. Through introducing Zernike phase contrast and heavy metal staining, images taken at 8 keV displayed sufficient contrast for observing nanoscale fine structures, such as the spermatheca cochleate duct and the subapex of the flagellum, which have some implications for the study of the sperm transfer process and genital evolution in insects. This work shows that both the spatial resolution and the contrast characteristic of hard X-ray microscopy are quite promising for insect morphology studies and, particularly, provide an attractive alternative to the destructive techniques used for investigating internal soft tissues.     

Correlation of Electron Beams and Hard X‐ray Emissions in ISTTOK Tokamak

The paper reports on experimental studies of electron beams in the ISTTOK tokamak, those were performed by means of an improved four‐channel detector. The Cherenkov‐type detector measuring head was equipped with four radiators made of two types of alumina‐nitrate (AlN) poly‐crystals: machinable and translucent ones, both of 10 mm in diameter and 2.5 mm in thickness. The movable support that enabled the whole detectors to be placed inside the tokamak vacuum chamber, at chosen positions along the ISTTOK minor radius. Since the electron energy distribution is one of the most important characteristics of tokamak plasmas, the main aim of the study was to perform estimations of an energy spectrum of the recorded electrons. For this purpose the radiators were coated with molybdenum (Mo) layers of different thickness. The technique based on the use of Cherenkov‐type detectors enabled the detection of fast electrons (of energy above 66 keV) and determination of their spatial and temporal characteristics in the ISTTOK experiment. Measurements of hard X‐rays (HXR), which were emitted during ISTTOK discharges, have also been performed. Particular attention was paid to the correlation measurements of HXR pulses with run‐away electron beams. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

19.5nm极紫外反射镜的研制

介绍了一种用于太阳观测19.5nm极紫外多层膜的研究工作。利用软件对规整的Mo/Si膜系结构进行了优化,拓宽了反射带宽,提高了积分反射率。采用双离子束溅射技术,时间控厚,成功制备了该反射镜。通过同步辐射反射率计测试表明,峰值反射率27.5%,均匀性在1%以内,已初步达到预设要求。     

半透明介质中辐射传递方程的反演计算及数值模拟

本文介绍了一侧为半透明、另一侧为非透明界面时一维半透明介质的辐射强度计算式。采用辐射与导热复合换热模型计算半透明介质内温度场。利用已知的温度场求半透明介质的辐射强度一正问题计算。将此辐射强度代入辐射反问题计算模型，引入测量误差，采用Ｃｈａｈｉｎｅ方法及演半透明介质内温度场一反问题计算。数值模拟表明，本文所采用的辐射反演法具有较高的精度及稳定性。     

An improved theory of microwave open resonators

The analytic theory of microwave open resonators is improved here by means of solving the complex Airy equation, that the Q-value as well as the argument of field profile may be given accurately. The resonance conditions for open cavities with high and moderate Q-values are derived analytically. Theoreticl Q-values are well agreed with the measured ones from experiments.     

空腔靶能量吸收,转换特性实验研究

本文介绍空腔靶设计的物理思想、及能量吸收特性、X光转换特性和堵腔特性的实验研究方法,给出了实验观察到的一系列物理现象,通过对现象的分析而得出空腔靶的能量吸收和X光转换明显优于平面靶;利用相对孔径较大的聚焦透镜打空腔靶有利于改善靶的能量吸收和转换特性的结论。     

光源在光学实验中的应用

本文对大学物理光学实验中常用光源做简单介绍,使学生明确不同的光源用于不同的实验目的。