Evaluation of molecular structure in Langmuir monolayers of zinc stearate and zinc 12-hydroxystearate by IR external reflection spectroscopy

 In situ polarized Fourier transform IR external reflection spectra of Langmuir monolayers of zinc stearate and zinc 12-hydroxystearate on a water surface were recorded for various surface areas, and their molecular structures were estimated. In the zinc stearate monolayer, the wavenumbers and the absorbances of the antisymmetric and symmetric methylene stretching bands did not change during monolayer compression, which means that orientational and conformational changes of the hydrocarbon chain did not occur. However, wavenumber changes of the antisymmetric and symmetric carboxylate stretching bands were observed during surface compression. The change in the binding nature of the zinc cation to the carboxylate group was speculated. Moreover, it was elucidated that the structure of the hydrocarbon chain in the zinc 12-hydroxystearate monolayer was different from that in the zinc stearate monolayer. Received: 21 March 2001 Accepted: 6 July 2001     

Design and fabrication of 2 kHz nematic liquid crystal variable retarder with reflection mode

ABSTRACT

This study proposes a simple method of designing a high-speed liquid crystal variable retarder (LCVR) with reflection mode. First, a series of simple formulas is provided for analysing the effects of tilt incidence and birefringence of the liquid crystal on the phase retardation and response time of the LCVR. Then, a reflective LCVR is fabricated to validate the theoretical analysis. Measured results show that the response speed can reach 2.7 kHz with a phase retardation of 1 λ. Furthermore, the theoretical curve is close to the measured curve while the incident angle is less than 10°. However, the theoretical and measured values show a considerable difference under a large incident angle. This problem is discussed, and a modified method is given. This work is helpful for the design and fabrication of high-speed LCVR.     

On diffuse reflection at the boundary for the Boltzmann equation and related equations

The paper considers diffuse reflection at the boundary with nonconstant boundary temperature and unbounded velocities. The solutions obtained are proved to conserve mass at the boundary. After a preliminary study of the collisionless case, the main results obtained are existence for the Boltzmann equation in a DiPerna-Lions framework with the above boundary conditions in a bounded measure sense, and existence together with uniqueness for the BGK equation with Maxwellian diffusion on the boundary in anL framework.Deceased.     

Method of polarization reflection matrix measurement in the submillimeter wave range

Homodyne method of measurement of polarization reflection matrix, providing the possibility of simultaneous measurement of all four complex coefficients of polarization reflection matrix in submillimeter quasi-optical (QO) circuits is presented. Technical realizability of the method for QO waveguides of the class of "hollow dielectric wavequide" is shown.     

Flow injection manifolds for liquid-liquid extraction without phase separation assisted by ultrasound

Flow injection (FI) manifolds based on iterative change of the flow direction have been designed to study the influence of auxiliary energy on continuous liquid-liquid extraction without phase separation and compare it with the non-assisted process in a single experiment. In order to demonstrate the utility of ultrasounds as auxiliary energy for the extraction of polyphenols from an organic phase, the approach has been applied to samples of extra virgin olive oil, using an alkaline aqueous phase as extractant and subsequent derivatization with the Folin-Ciocalteu reagent. The proposed method provides results similar to those from the official method-recoveries between 97 and 100%. The sensitivity of the proposed method is 3.5 times higher than that of the non-ultrasound-assisted method. The precision, expressed as relative standard deviation (R.S.D.) for n=5, was within 1-5% and the relative errors for the irradiated and non-irradiated method were within 3 and 5%, respectively. The repeatability and within-laboratory reproducibility, studied at two concentration levels (379 and 813 μg ml⁻¹) ranged between 0.7-4.4% and 0.6-4.8%, respectively. The proposed manifolds can also be applied to either other type of auxiliary energies—microwave, thermal—or two different types of auxiliary energies at the same time.     

超声波作用下的糖精相转移催化N—苄基化反应的研究

超声波作用下的糖精相转移催化Ｎ－苄基化反应的研究嵇学林刘华黄昆（江苏镇江医学院有机化学教研室镇江２１２００１）关键词超声波相转换催化糖精苄基化有机声化学近年来，由于超声波（Ｕｌｔｒａｓｏｕｎ，缩写Ｕ．Ｓ）在有机合成中应用的不断发展，逐渐形成了一门新兴...     

Green method for ultrasensitive determination of Hg in natural waters by electrothermal-atomic absorption spectrometry following sono-induced cold vapor generation and ‘in-atomizer trapping’

Sono-induced cold vapor generation (SI-CVG) has been used for the first time in combination with a graphite furnace atomizer for determination of Hg in natural waters by electrothermal-atomic absorption spectrometry after in situ trapping onto a noble metal-pretreated platform (Pd, Pt or Rh) inserted into a graphite tube. The system allows ‘in-atomizer trapping’ of Hg without the use of conventional reduction reactions based on sodium borohydride or tin chloride in acid medium for cold vapor generation. The sono-induced reaction is accomplished by applying ultrasound irradiation to the sample solution containing Hg(II) in the presence of an organic compound such as formic acid. As this organic acid is partly degraded upon ultrasound irradiation to yield CO, CO₂, H₂ and H₂O, the amount of lab wastes is minimized and a green methodology is achieved.     

Reflection of electrons and photons from solids bombarded by 0.1 - to 100-MeV electrons

Electron and photon reflection ratios (in number and energy) for absorbers bombarded by electrons have been computed with the ITS Monte Carlo system version 3. Electrons of energies from 0.1 to 100 MeV have been assumed normally incident on an effectively semi-infinite absorber. The absorbers considered are elemental solids of atomic numbers from 4 to 92. The data on the electron reflection ratios agree rather well with the experimental data collected from literature except some discrepancies when the number-reflection ratio is small. For photons, the number-reflection ratio increases with increasing energy, but the energy-reflection ratio shows a maximum around 10 MeV. Empirical equations for the electron reflection ratios and the photon energy-reflection ratio are given (for electrons, graphs only).     

Ultrasonic-assisted leaching of trace metals from sediments as a function of pH

The effects of ultrasonication on the leaching of trace metals form sediments as a function of pH have been investigated using atomic absorption spectrometry. Cu, Pb, Ni, Zn and Mn were leached from sediments by ultrasonic effect using phthalate buffers at pH values of 2.2-6.0. Parameters influencing leaching, such as leaching time, solution matrix, wet or dry sample and final pH were evaluated. Results from ultrasonic leaching experiments were comparable to those of conventional procedure. In addition, this ultrasonic-assisted leaching method reduces the time required for conventional method approximately from 12 h to 25 min. Depending on the metal and sample type, metal removal increased linearly or exponentially with decreasing pH. The accuracy of the method was tested by comparing obtained results with this of conventional method. The average relative standard deviation (R.S.D.) of ultrasonic-assisted leaching method (ULM) varied between 1.71 and 3.00% for N = 36, depending on the analyte. This technique shows promise for studying chemical and biological availability and uptake/release processes for metals in sediment and soil as a function of pH.     

Fluorescence monitoring of ultrasound degradation processes

Ultrasound-based water treatment is often applied for degradation of stable organic pollutants, such as polycyclic aromatic hydrocarbons and halogenated compounds. Monitoring the degradation process, during the application of ultrasound radiation, is of considerable economical interest. In this work, the possibility of performing on-line spectral analysis during sonication was examined and it was found that direct absorption or fluorescence readings are misleading. Optical monitoring is strongly affected by the absorption and scattering of light by cavitation micro-bubbles and ultrasound induced particulates. A model was developed to account for these effects and to allow for on-line fluorescence analysis. The model takes into account the absorption and scattering coefficients of the micro-bubbles and particulates, as well as their time dependent concentration. The model parameters are found from independent measurements where the pollutants are added to already sonicated pure water. Then, the model is tested for predicting the actual fluorescence behavior during the sonication process. It has been shown that the model allows for recovery of the true degradation data, as obtained by off-line HPLC measurements.