Density, ultrasonic velocity, surface tension, excess volume and viscosity of quaternary fluid solutions

Density, ultrasonic velocity, surface tension, excess volume and viscosity of quaternary non-electrolyte solution n-pentane+tolune+n-heptane+cyclohexane has been experimentally determined at 25 °C over a wide range of composition. Assuming a quaternary fluid solution to be made of six binaries, a statistical approach of Prigogine–Flory–Patterson (PFP) theory has been extended to develop the expressions for dynamic viscosity, surface tension excess volume and ultrasonic velocity of quaternary fluid system. A reasonable agreement has been achieved between theory and experiment. An attempt has also bee made to explain the nature of molecular interactions involved in the light of excess thermodynamic functions whose sign and magnitude depend upon the chain length and size of the component fluids and also studied the role of order breakers (toluene and cyclohexane) on these properties.     

酸浆宿萼总黄酮提取工艺的研究

采用乙醇浸泡法、回流提取法、超声提取法探讨了从酸浆宿萼中提取总黄酮类物质的最佳工艺.试验结果表明超声提取效果最好.其最佳条件是:用浓度为70%、按料液比1 : 30的比例的乙醇浸泡24 h,再用超声提取45 min,其宿萼中总黄酮类物质的提出率可达1.702 mg·g-1;对超声提取酸浆宿萼黄酮的浓缩液用聚酰胺树脂进行纯化.并通过样品的总黄酮与FeCl3、浓H2SO4.等试剂的特征反应对所得提取物进行了定性分析,确定了所得提取物为黄酮类物质.     

流产后宫内胎物组织残留的超声诊断

回顾性分析了４６例临床被证实为宫内胎物组织残留的病例。结果表明，流产后较长时间有不规则阴道流血，而作Ｂ超检查能发现特征性改变。声像图显示，子宫增大，宫内有异常光团和不规则液性暗区或宫腔局部膨隆，周边见很亮光条。认为诊断宫内残留组织，可以结合病只与声像技术较易诊断出来。本组超声诊断符合率达９８％。对减少因宫内残留造成的子宫收缩不良、不规则阴道流血等现象，避免并发感染及导致绒癌发生等不良后果，有重要的     

Ultrasonic velocity of binary systems at elevated pressures

Various empirical theories of ultrasonic velocity have been applied to three binary liquid mixtures, under pressures up to 200 MPa and their validity have been tested. A pressure dependent study of ultrasonic velocities has been made at 303.15 K. The agreement between theory and experiment is found to be quite satisfactory.     

Lead Sensor Using Gold Nanostructured Screen‐Printed Carbon Electrodes as Transducers

Gold nanostructured screen‐printed carbon electrodes are demonstrated to be suitable transducers for the determination of lead using square‐wave voltammetry. Reproducible gold nanostructures have been obtained by direct electrochemical deposition. A calibration plot from 2.5 to 250 μg/L was obtained in acidic solutions of Pb(II) with a reproducibility of 4% (n=10). The detection limit was 0.09 μg/L of lead. The method is then applied to perform a blood lead analysis by adjusting square‐wave parameters in capillary or venous blood with a minimum sample pretreatment and excellent accuracy and reproducibility.     

Probing particle-particle interactions in flocculated oil-in-water emulsions using ultrasonic attenuation spectrometry

The flocculation of silicone oil-in-water emulsions ( φ = 0.1) containing quasi-monodisperse droplets was studied by ultrasound. The ultrasonic attenuation spectra of emulsions with different particle sizes (200-1600 nm) were measured between 0.5 and 10 MHz using an interferometer. Flocculation was induced by adding excess sodium dodecyl sulphate micelles to the emulsions to increase the attractive forces between the droplets. Droplet flocculation decreased the ultrasonic attenuation at low frequencies because of overlap of the thermal waves caused by the close proximity of the droplets within the flocs. A mean-field model which takes into account this effect was used to determine the droplet volume fraction within the flocs and thus to estimate the distance between the droplets. Received 17 July 2000     

A Jump-U model of echo pattern for a sonar ranging module

Sonar is extensively used in robot as a range sensor and the time-of-flight (TOF) information of ultrasonic echo is frequently adopted in sonar applications. This paper proposes a Jump-U model of ultrasonic echo pattern based on TOF data for a sonar ranging module. The model is established through a data regression method, utilizing TOF data and the relation between the delay time and the bearing angle of the sensor as input parameters. Because the proposed model can explain the jump phenomenon of TOF data and the shape of TOF data is similar to character U, the model is named as Jump-U. Moreover, the model includes several parameters, and one of them is intensity factor which can be regard as a relative strength of ultrasonic echo. Experiments are conducted to verify the proposed model by measuring the echo’s TOF data of a plane with distances ranging from 100 to 200 cm. The results show a close agreement between simulation and measurements.     

Suspension culture in a T-flask with acoustic flow induced by ultrasonic irradiation

Suspension culture is an essential large-scale cell culture technique for biopharmaceutical development and regenerative medicine. To transition from monolayer culture on the culture surface of a flask to suspension culture in a bioreactor, a pre-specified cell number must first be reached. During this period of preparation for suspension culture, static suspension culture in a flask is generally performed because the medium volume is not large enough to use a paddle to circulate the medium. However, drawbacks to this static method include cell sedimentation, leading to high cell density near the bottom and resulting in oxygen and nutrient deficiencies. Here, we propose a suspension culture method with acoustic streaming induced by ultrasonic waves in a T-flask to create a more homogeneous distribution of oxygen, nutrients, and waste products during the preparation period preceding large-scale suspension culture in a bioreactor. To demonstrate the performance of the ultrasonic method, Chinese hamster ovary cells were cultured for 72 h. Results showed that, on average, the cell proliferation was improved by 40% compared with the static method. Thus, the culture time required to achieve a 1000-fold increase could be reduced by 32 h (a 14% reduction) compared with the static method. Furthermore, the ultrasonic irradiation did not compromise the metabolic activity of the cells cultured using the ultrasonic method. These results demonstrate the effectiveness of the ultrasonic method for accelerating the transition to large-scale suspension culture.     

Effect of ultrasonic on the structure and quality characteristics of quinoa protein oxidation aggregates

Protein oxidation leads to covalent modification of structure and deterioration of functional properties of quinoa protein. The objective of this study was to investigate the effects of ultrasonic treatment on the functional and physicochemical properties of quinoa protein oxidation aggregates. In this concern, 2,2′-azobis (2-amidinopropane) dihydrochloride (AAPH) was selected as oxidative modification of quinoa protein. The microstructure of quinoa protein displayed by scanning electron microscope (SEM) indicated that oxidation induced extensive aggregation, leading to carbonylation and degradation of sulfhydryl groups. Aggregation induced by oxidation had a negative effect on the solubility, turbidity, emulsifying stability. However, according to the analysis of physicochemical properties, ultrasonic significantly improved the water solubility of quinoa protein. The quinoa protein treated by ultrasonic for 30 min exhibited the best dispersion stability in water, which corresponded to the highest ζ-potential, smallest particle size and most uniform distribution. Based on the FT-IR, SDS-PAGE and surface hydrophobicity analysis, the increase of α-helix, β-turn and surface hydrophobicity caused by cavitation effect appeared to be the main mechanism of quinoa protein solubilization. In addition, the hydrophobic region of the protein was re-buried by excessive ultrasonic treatment, and the protein molecules were reaggregated by disulfide bonds. Microstructural observations further confirmed that ultrasonic treatment effectively inhibited protein aggregation and improved the functional properties of quinoa protein.     

Enhanced photocatalytic degradation of organic dyes by ultrasonic-assisted electrospray TiO2/graphene oxide on polyacrylonitrile/β-cyclodextrin nanofibrous membranes

Polyacrylonitrile (PAN)/β-cyclodextrin (β-CD) composite nanofibrous membranes immobilized with nano-titanium dioxide (TiO₂) and graphene oxide (GO) were prepared by electrospinning and ultrasonic-assisted electrospinning. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray diffraction (XRD) confirmed that TiO₂ and GO were more evenly dispersed on the surface and inside of the nanofibers after 45 min of ultrasonic treatment. Adding TiO₂ and GO reduced the fiber diameter; the minimum fiber diameter was 84.66 ± 40.58 nm when the mass ratio of TiO₂-to-GO was 8:2 (PAN/β-CD nanofibrous membranes was 191.10 ± 45.66 nm). Using the anionic dye methyl orange (MO) and the cationic dye methylene blue (MB) as pollutant models, the photocatalytic activity of the nanofibrous membrane under natural sunlight was evaluated. It was found that PAN/β-CD/TiO₂/GO composite nanofibrous membrane with an 8:2 mass ratio of TiO₂-to-GO exhibited the best degradation efficiency for the dyes. The degradation efficiency for MB and MO were 93.52 ± 1.83% and 90.92 ± 1.52%, respectively. Meanwhile, the PAN/β-CD/TiO₂/GO composite nanofibrous membrane also displayed good antibacterial properties and the degradation efficiency for MB and MO remained above 80% after 3 cycles. In general, the PAN/β-CD/TiO₂/GO nanofibrous membrane is eco-friendly, reusable, and has great potential for the removal of dyes from industrial wastewaters.