Influence of ultrasound on the functional characteristics of indigenous varieties of mango (Mangifera indica L.)

The present study was conducted to evaluate the effect of ultrasonic (US) treatment on chemical characteristics and antioxidant potential of pulps obtained from eight mango varieties indigenous to Pakistan. There was a significant (p < 0.05) effect of varieties and US treatment on chemical characteristics i.e. pH, acidity, TSS, vitamin C contents, total sugars (%), reducing sugars (%) and non-reducing sugars (%). Microstructure evaluation of pulp from all mango varieties showed deshaped middle lamella and cell wall of cells after 8 min of US treatment. At 4 min of US treatment as per shaped cell wall and middle lamella, the chemical characteristics and antioxidant potential were higher. The total phenolics (TP), flavonoids (TF) and total antioxidant activity (TAA) of pulp from most varieties increased significantly (p < 0.05) after US treatment for 4 min but decreased successively after each treatment i.e. 8 and 12 min. The maximum value (314.17 μg AAE/mL pulp) of DPPH was shown by pulp from Dosehri and the minimum (158.67 μg AAE/mL pulp) was found in pulp from Langra before US treatment. The DPPH values of pulp from most of the varieties increased significantly (p < 0.05) after US treatment for 4 min but decreased successively after each treatment but pulp from Langra showed increasing trend after 8 min of US treatment which decreased after 12 min of treatment. The total anthocyanin (TA) values of pulp from Chaunsa, Dosehri, Sindhri, Gulab Khas and Langra increased abruptly after US treatment for 4 min but decreased successively after subsequent treatment. The pulp from Desi, Anwar Ratol, Gulab Khas and Langra showed an abrupt decrease in TA after 8 min of US treatment. An increasing trend of values of total carotenoids (TC) was shown by pulp from all mango varieties after 4 min of US treatment but decreasing trend was observed with subsequent increase in time of US treatment.     

Intensification of delignification of Tectona grandis saw dust as sustainable biomass using acoustic cavitational devices

Delignification of sawdust was studied using ultrasound assisted alkali peroxide approach using longitudinal horn for the first time and the efficacy compared with more commonly used configurations of ultrasonic reactors. Comparison with the conventional approach based on stirring has also been presented to establish the process intensification benefits. Effect of different operating parameters such as sodium carbonate concentration (0.1, 0.15, 0.2, 0.25 M), hydrogen peroxide concentration (0.2, 0.4, 0.6, 0.8, 1 M) and biomass loading (2, 4, 6, 8, 10 wt%), on the efficacy of lignin extraction has been investigated for different ultrasonic reactors. The optimum conditions for probe type ultrasonic horn were established as 150 W, 50% duty cycle and 80% amplitude with optimum process conditions as Na₂CO₃ concentration as 0.2 M, H₂O₂ concentration as 1 M, biomass loading of 10 wt% and operating time of 70 min. Longitudinal horn resulted in best efficacy (both in terms of yield and energy requirements) followed by ultrasonic horn and ultrasonic bath whereas the conventional approach was least effective. The obtained lignin was also analyzed using different characterization techniques. The presence of peaks at wavelength range of 875–817, 1123–1110, and at 1599 cm⁻¹ for the extracted sample confirmed the presence of lignin. Increase in the crystallinity index of the processed sample (maximum for longitudinal horn) also confirmed the lignin removal as lignin is amorphous in nature. Overall it has been concluded that ultrasound can be effectively used for delignification with longitudinal horn as best configuration.     

Ultrasound assisted preparation of calcium alginate beads to improve absorption of Pb+2 from water

Calcium alginate (CaAlg) beads were prepared using ultrasound for use in the removal of lead from natural and wastewaters by ion exchange. Ultrasound was applied in a batch mode with an ultrasonic bath or in a flow mode using an ultrasonic clamp-on device. For comparison purposes the synthesis was performed in batch mode in the absence of the ultrasound. The beads prepared using ultrasound showed a greater ion exchange capability which could be ascribed to a larger specific surface area as a result of surface roughening induced by cavitation.Scanning Electron Microscopy (SEM) images revealed that the roughening was in the form of corrugation for the product with the best ion exchange capability obtained in the flow process where preformed CaAlg droplets were subjected to ultrasound during the setting process. These beads performed 11% better for lead removal than those synthesized in the absence of ultrasound.     

Damage characteristics and surface description of near-wall materials subjected to ultrasonic cavitation

For the analysis of ultrasonic cavitation erosion on the surface of materials, the ultrasonic cavitation erosion experiments for AlCu4Mg1 and Ti6Al4V were carried out, and the changes of surface topography, surface roughness, and Vickers hardness were explored. Cavitation pits gradually expand and deepen with the increase of experiment time, and Ti6Al4V is more difficult to erode by cavitation than AlCu4Mg1. After experiments, the cavitation damage characteristics such as the single pit, the rainbow ring area, the fisheye pit, and some small pits were observed, which can be considered to be induced by a single micro-jet impact, ablation effect caused by the high temperature, micro-jet impingement with a sharp angle, and multibeam micro-jets coupling impact or negative pressure in the local area produced by micro-jet impact, respectively. The surface roughness and Vickers hardness of the material increase slowly after rapid growth at different points in time as the experiment time increases. With the increase of the ultrasonic amplitude, both of them first increase and then decrease after the ultrasonic amplitude is greater than 10.8 μm. The increases in surface roughness and Vickers hardness tend to decrease as the viscosity coefficient increases. Ultrasonic cavitation can cause submicron surface roughness and increase surface hardness by 20.36%, so it can be used as a surface treatment method.     

Toward efficient interactions of bubbles and coal particles induced by stable cavitation bubbles under 600 kHz ultrasonic standing waves

The interactions of bubbles and coal particles in 600 kHz ultrasonic standing waves (USW) field has been investigated. A high-speed camera was employed to record the phenomena occurred under the USW treatment. The formation and behaviors of cavitation bubbles were analyzed. Under the driving of these cavitation bubbles, whose size is from several microns to dozens of microns, coal particles were aggregated and then attracted by large bubbles due to the acoustic radiation forces. The results of USW-assisted flotation show a significant improvement in recoveries at 600 kHz, which indicates that the interactions of bubbles and particles in the USW field are more efficient than that in the conventional gravitational field. Furthermore, the sound pressure distribution of the USW was measured and predicted by a hydrophone. The analysis of gravity and buoyancy, primary and secondary Bjerknes forces shows that bubble-laden particles can be attracted by the rising bubbles under large acoustic forces. This study highlights the potential for USW technology to achieve efficient bubble-particle interactions in flotation.     

Study on the changes of ultrasonic parameters over supercritical Ni-Co electroplating process

This work discusses the influence of changes to ultrasound (US) parameters over the nickel cobalt (Ni-Co) metal thin film properties produced by supercritical CO₂ (SC-CO₂) electroplating. Additionally, Ni-Co films were produced by conventional electroplating and silent SC-CO₂ and compared against each other.The discussion on metal thin film properties revolves around variations to the bath type ultrasonic power (15 W and 20 W) and frequency (42 k Hz and 72 kHz) during experiments. The properties provided by the three electroplating processes and analyzed include: grain sizes, film elemental content analyses, surface microstructures, film hardness, corrosion resistance, surface roughness, crystalline structure and preferential growth, etc. From the results it was clear that quality of films produced by US-SC-CO₂ was improved compared to that of films produced by silent SC-CO₂, which itself was better than those produced by conventional electroplating. However, when US power was varied we observed a decline in the mechanical properties of the produced films.The combination of ultrasonic agitation with SC-CO₂ allows for improved mechanical properties such as: lower surface roughness, finer grain size and surface morphologies, increased corrosion resistance and film hardness. The ultrasound agitation applied to SC-CO₂ electroplating enhanced the formation of alloyed metal as ultrasonic agitation increased the electrolyte flowability during electroplating process resulting in increased mass transfer while at the same time achieving a surface cleaning effect which removed metal ions with poor adhesion and other unwanted particles. Moreover, application of ultrasonic agitation avoids the use of surfactants so only changes to the physical phenomena and no changes to the chemical composition of the deposited thin films were observed, meaning less pollution to the electrolyte and higher purity of the deposited films.The US-SC-CO₂ electroplating method described in this work effectively enhanced the mechanical properties of the deposited thin films compared to those produced by both silent SC-CO₂ and conventional electroplating processes.     

Ultrasonic assisted functionalization of MWCNT and synergistic electrocatalytic effect of nano-hydroxyapatite incorporated MWCNT-chitosan scaffolds for sensing of nitrofurantoin

In the present work, we report the fabrication of stable composite of chitosan hydrogels (CHI) on multiwalled carbon nanotubes (MWCNT) using a simple ultrasonic-assisted method. Also, rod-like hydroxyapatite nanoparticles (HA NPs) were synthesised using a hydrothermal route and were incorporated into the highly conductive MWCNT-CHI scaffolds using an ultrasonication method. The functionalization of MWCNT and preparation of HA NPs on MWCNT-CHI nanocomposite were done using the sonication over the frequency of 37 kHz with the ultrasonic power capable of 150 W (Elmasonic Easy 60H bath sonicator). The resulting hybrid HA NPs/MWCNT-CHI nanocomposites have an excellent surface area and high surface to volume ratio, which leads to the sensitive detection of nitrofurantoin than pristine MWCNT and HA NPs. The complete elemental and morphological analyses of the HA NPs/MWCNT-CHI nanocomposites were characterised by XRD, FTIR, RAMAN, FESEM, TEM, EDX, and elemental mapping techniques. Electrochemical analysis of the HA NPs/MWCNT-CHI nanocomposites was carried out by cyclic voltammetry, electrochemical impedance spectroscopy and amperometry methods. The modified glassy carbon electrode (GCE) of HA NPs/MWCNT-CHI nanocomposites exhibit the nitrofurantoin detection activity at the linear range of 0.005–982.1 µM with the detection limit of 1.3 nM. The synergistic electrocatalytic activity of HA NPs/MWCNT-CHI nanocomposites modified GCE is correlated to the sensitivity of 0.16 µAµM⁻¹ cm⁻² with excellent precision and accuracy towards the sensing of nitrofurantoin.     

Ultrasound pre-fractured casein and in-situ formation of high internal phase emulsions

Traditional preparation of protein particles is usually complex and tedious, which is a major issue in the development of Pickering high internal phase emulsions (HIPEs). In this study, a facile and in-situ method for the preparation of food-grade Pickering HIPEs was developed using ultrasound pre-fractured casein flocs. The ultrasonic-treated casein protein and resulting Pickering HIPEs were characterised using particle size distribution, confocal laser scanning microscopy (CLSM), cryo-SEM, and rheological measurement. The results indicated that pH values of casein and ultrasonic power level were key parameters for casein protein dispersion into nanoparticles to form o/w Pickering HIPEs. In optimal conditions, the hexagons of emulsion droplets were close together, and the emulsions formed with ultrasonic caseins exhibited gel-like behaviour. Additionally, ultrasonic microscale-sized caseins (about 25 μm) disappeared upon the use of high speed homogenisation during the formation of HIPEs, while the chemical distribution revealed by confocal laser scanning microscopy indicated that the dispersive nanoparticles from casein proteins were evidently absorbed on the interface of HIPEs (cryo-SEM). These findings prove that ultrasound is an effective tool to loosen casein flocs to induce the in-situ formation of stabilised Pickering HIPEs. Overall, this work provides a green and facile route to convert edible oil into a soft solid, which has great potential for applications in biomedical materials, 3D printing technology, and various cosmetics.     

细胞表面壳化的研究进展

细胞表面壳化主要是通过物理、化学等技术方法对细胞表面进行修饰,形成完整均匀的有机、无机、金属纳米粒子或者复合壳层结构,从而使不能自身壳化的生物细胞表面形成保护壳甚至赋予细胞新的功能,使细胞具备多功能性。近年来,此技术在细胞存储、细胞运输、细胞传感器、细胞芯片以及细胞治疗等方面应用广泛,发展迅速。本文综合目前的研究现状,详细介绍了可进行细胞表面壳化的细胞类型、生物表面壳化的方法以及人造细胞外壳的工程技术在生物医学以及能源环境中的应用等。     

Supramolecular Phthalocyanine Assemblies for Improved Photoacoustic Imaging and Photothermal Therapy

Phototheranostic nanoplatforms are of particular interest for cancer diagnosis and imaging‐guided therapy. Herein, we develop a supramolecular approach to fabricate a nanostructured phototheranostic agent through the direct self‐assembly of two water‐soluble phthalocyanine derivatives, PcS4 and PcN4. The nature of the molecular recognition between PcS4 and PcN4 facilitates the formation of nanostructure (PcS4‐PcN4) and consequently enables the fabrication of PcS4‐PcN4 with completely quenched fluorescence and reduced singlet oxygen generation, leading to the high photoacoustic and photothermal activity of PcS4‐PcN4. In vivo evaluations suggest that PcS4‐PcN4 could not only efficiently visualize a tumor with high contrast through whole‐body photoacoustic imaging but also enable excellent photothermal therapy for cancer.