Effect of ultrasound on the synthesis of low-modulus zeolites from a metakaolin

It was studied the effect of ultrasonic processing (22 kHz) of the aqueous suspension of metakaolin, sodium hydroxide and alumina with a molar ratio 2Al₂Si₂O₇:12NaOH:2Al₂O₃ on the low-modulus zeolite synthesis processes. To investigate the XRD, SEM, IR, EDS had been used. It was shown that after ultrasonic processing, sodium aluminates are formed, what leads to a change in process of further synthesis. It was found that without ultrasonic processing on the stage of thermal treatment at 650 °C, SOD zeolite (|Na₆|[Al₆Si₆O₂₄]) and sodium aluminosilicate (Na₆Al₄Si₄O₁₇) are synthesized. In the sample after ultrasound during thermal treatment, only sodium aluminosilicates of cubic syngony (Na₆Al₄Si₄O₁₇ and Na₈Al₄Si₄O₁₈) are formed. It was demonstrated that sodium aluminosilicates are precursors for the formation of LTA zeolite (|Na₁₂|[Al₁₂Si₁₂O₄₈]). As a result zeolitization of sodium aluminosilicates after the hydrothermal crystallization in alkaline solution, the sonicated sample contained 97 wt% LTA. Without ultrasonic processing, the product of synthesis contained 50 wt% SOD and 40 wt% LTA.     

连续臂丛神经阻滞镇痛对断指再植血流动力学影响的研究

目的研究连续臂丛神经阻滞镇痛对断指再植术后再植指血流动力学的影响，探讨其缓解血管痉挛、增加血流量的可行性。方法将60例急诊行断指再植术患者按随机数字表法分为术后连续臂丛神经阻滞镇痛组（CA组）和对照组（NA组），每组30例。观察两组患者再植指术后血管痉挛、血管栓塞和指体坏死发生例数并计算再植指成活率，记录两组术后即刻（T1）、术后24h（T2）再植指固有动脉血流动力学参数及动脉内径（AD）、远指端血氧饱和度（SpO2）和温度（Ts）变化。结果断指再植术后成活率CA组高于NA组，血管痉挛、血管栓塞和指体坏死发生率CA组均低于NA组，差异均有统计学意义（均P＜0.05）。在T2时CA组各项血流动力学参数、AD、SpO2、Ts均高于NA组，阻力指数（RI）低于NA组，差异均有统计学意义（均P＜0.05）。结论术后连续臂丛神经阻滞镇痛可以缓解再植指固有动脉痉挛，增加指体血流量，提高了断指再植的成功率。     

Thermal stability of ester linkage in the presence of 1,2,3‐Triazole moiety generated by click reaction

The copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC), so‐called “click” reaction, is one of most useful synthetic strategies to connect two polymer chains. 1,2,3‐Triazole ring (TA) produced by the click reaction has good thermal and chemical stability. However, we observed that block copolymers synthesized by the click reaction showed thermal degradation to give homopolymers when they are thermally annealed at high temperature, which is required for obtaining equilibrium microdomain structure. To investigate the origin of thermal instability of block copolymers, we synthesized model polystyrenes (PSs) using systematically designed bi‐functional atom transfer radical polymerization (ATRP) initiators containing TA. PS including both ester and TA groups showed thermal decomposition at relatively low temperature (e.g., 140 °C). MALDI‐TOF analysis clearly demonstrated that the cleavage site is the ester group adjacent to TA. We also found that the bromine group located at the polymer chain end plays an important role in pyrolysis of ester groups at low temperature. The pyrolysis occurs by syn‐elimination of the ester group. This result implies that the phase behavior of block copolymer synthesized by click reaction should be carefully investigated when high temperature thermal annealing is required. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 427–436     

彩虹自标定方法对混合喷雾比例的原位测量

传统彩虹测量技术标定复杂、精度可重复性差且难以适应密闭空间。一种基于多彩虹谱线自标定方法,可省去原有的标定系统装置,将标定过程内化于对彩虹信号的处理,以水为例的测量偏差仅为0.13%。将该技术应用于混合喷雾液滴组分浓度测量中,探究并优化了参与混合的两种液体组分的方案。实验采用60%乙醇-水混合喷雾,原位测量了混合喷雾场多点组分浓度,测量结果差别可以控制在0.5%以内,表明该方法技术在相关领域的应用潜力。     

Determination of Pd,Rh, Pt,Au in road dust by electrothermal vaporization inductively coupled plasma mass spectrometry with slurry sampling

Inductively coupled plasma mass spectrometry coupled with ultrasonic slurry sampling electrothermal vaporization (USS-ETV-ICP-MS) has been applied to determine Pd, Rh, Pt and Au in 0.5% m/v slurries of several road dust samples. 2% m/v ammonium pyrrolidine dithiocarbamate (APDC) was used as the modifier to enhance the ion count. The influence of instrument operating conditions, slurry preparation and interferences on the ion count was reported. This method has been applied to the determination of Pd, Rh, Pt and Au in BCR 723 Road Dust and NIST SRM 2709 San Joaquin Soil reference materials and two road dust samples collected locally. The analysis results of the standard reference materials agreed with the certified values. Precision between sample replicates was better than 10% for all the determinations. The method detection limits estimated from standard addition curves were 0.9, 0.4, 0.6 and 0.4 ng g⁻¹ for Pd, Rh, Pt and Au, respectively, in original dust samples.     

Broadband dielectric characterization of piezoelectric poly(vinylidene fluoride)thin films between 278 K and 308 K

This work describes the dielectric properties of piezoelectric poly(vinylidene fluoride) (PVDF) thin films in the frequency and temperature ranges relevant for usual applications. We measured the isothermal dielectric relaxation spectra of commercial piezoelectric PVDF thin films between 10 Hz to 10 MHz, at several temperatures from 278 K to 308 K. Measurements were made for samples in mechanically free and clamped conditions, in the direction of the poling field (perpendicular to the film). We found that the imaginary part of the dielectric relaxation spectra of free and clamped PVDF samples is dominated by a peak, above 100 kHz, that can be characterized by a Havriliak-Negami function. The characteristic time follows an Arrhenius dependence on temperature. Moreover, the spectra of the free PVDF samples show two additional peaks at low frequencies which are associated with mechanical relaxation processes. Our results are important for the characterization of piezoelectric PVDF, particularly after the stretching and poling processes in thin films, and for the design and characterization of a broad range of ultrasonic transducers.     

小球藻热裂解油催化加氢精制研究

以Ni-Co-Pd/γ-Al₂O₃为催化剂,在固定床反应器中研究了小球藻热裂解油的催化加氢精制。在较低加氢压力(2×10⁶ Pa)下考察了加氢温度和氢油比(体积比)对精制生物油的含水率、热值、运动黏度和十六烷值等参数的影响,并对加氢前后油品进行了元素分析和GC-MS分析。结果表明,在2×10⁶ Pa压力下,氢油比为120:1,温度为300 ℃时,精制油收率达89.6%,热值和十六烷值较加氢前分别增加了17.94%和71.2%,黏度下降66.32%。元素分析和GC-MS分析表明,精制生物油的H/C原子比由1.55提高至1.97,氧、氮、硫含量明显降低,脱氧率达到80.46%。精制油中的有机酸、酯、酮、醛的含量明显降低,烷烃和醇醚含量明显增加。     

应用TG-FTIR技术研究黄土庙煤催化热解特性

用浸渍法制备过渡金属氧化物担载型催化剂MO_x/USY(M=Co、Mo、Co-Mo),用热重红外联用技术考察了MO_x/USY催化剂对黄土庙(HTM)煤热解失重特性和热解产物生成规律的影响。热重实验结果表明,MO_x/USY催化剂可使HTM煤热解的二次脱气条件更为温和,热解峰温分别提前14、23和9℃。动力学分析结果表明,MO_x/USY催化剂可降低HTM煤样热解的活化能。FT-IR研究表明,MO_x/USY催化剂可有效改善HTM煤热解产物的组成和分布,CoO_x/USY催化剂能显著提高HTM煤热解产物中高热值气体(CO、CH₄)和轻质芳烃以及脂肪烃类化合物的含量;MoO_x/USY催化剂没有明显改善HTM煤热解产物组成和分布;MoO_x-CoO_x/USY催化剂可促进CO、CH₄、轻质芳烃和脂肪烃类化合物的生成,却使热解产物的生成向高温区移动,说明USY负载的不同过渡金属氧化物对煤样热解行为和热解产物有较大影响。