非均匀流体介质内部散射声场重建的逐层计算方法*

入射声波激励下非均匀流体介质内部散射声场的重建方法对超声层析成像具有重要意义。以往采用矩量法求解,但该方法全域离散形成的复数满秩矩阵规模随着分辨率与计算精度的提高而急剧增大,对算力具有很高的要求,一定程度上限制了其在实际中的应用。为克服上述缺陷,本文以逐层离散、逐层计算为核心思想,以声散射基本公式与近场声全息理论为基础,推导出逐层计算非均匀流体介质内部散射声场的理论公式并给出对应的几何离散模型。为验证该方法的可行性,以矩量法为参照,对同样的介质模型进行介质内部声场重构仿真。结果表明,逐层算法不仅可以有效地重建非均匀流体介质内部散射声场,且大幅度减小了求解规模。     

Digital computation of transient characteristics of an induction motor on switched supply

A novel method of computing the nonlinear differential equations relating to the transient behaviour of an induction motor using a polynomial series, is presented. The stator and rotor currents and the angle of rotation are expressed as polynomial series dependent on time. These are then substituted into the differential equations of the induction motor to compute the polynomial coefficients and, consequently, the transient quantities. Since the equations are nonlinear, the computations are carried out using the step-by-step method. The stator and rotor currents, speed and torque are calculated for acceleration and braking conditions. The results are compared both analytically and experimentally.     

One-step ultrasonic synthesis of Co/Ni-catecholates for improved performance in oxygen reduction reaction

The inherent periodically arranged M−N_X, M−S_X and M−O_X units (M are usually Fe, Co, Ni, etc.) in metal–organic frameworks (MOFs) can be promising active centers in electrocatalysis. In previous studies, MOFs were usually constructed by energy-consuming hydro- or solvo-thermal reactions. Ultrasonic synthesis is a rapid and environment-friendly technique when envisaging MOFs’ industrial applications. In addition, different synthetic pathways for MOFs may lead to difference in their microstructure, resulting in different electrocatalytic performance. Nevertheless, only a handful of MOFs were successfully prepared by ultrasonic synthesis and few were applied in electrochemical catalysis. Herein, we constructed Ni/Co-catecholates (Ni/Co-CATs) synthesized by one-step ultrasonic method (250 W, 40 KHz, 25 W/L, Ultrasonic clearing machine) and compared their performance in oxygen reduction reaction (ORR) with that of Ni/Co-CATs synthesized by hydrothermal method. Ni-CAT and Co-CAT prepared by ultrasonic showed the half-wave potential of −0.196 V and −0.116 V (vs. Ag/AgCl), respectively. The potentials were more positive than those prepared by hydro-thermal method. And they showed excellent electrochemical stability in neutral solution. The latter was only 32 mV lower than that of commercial Pt/C. The improved performance in ORR was attributed to higher specific surface area and mesopore volume as well as more structural defects generated in the ultrasonic synthesis process, which could facilitate their exposure of electrocatalytic active sites and their mass transport. This work gives some perspective into cost-effective synthetic strategies of efficient MOFs-based electrocatalysts.     

单相旋转型驻波超声电机的数学模型及仿真

尽管单相驱动的旋转型驻波超声电机的原理样机早巳研制成功，但对这类电机的运动机理的研究却一直局限在定性分析上。本文将从能量角度，根据Hamilton变分原理，定、转子摩擦界面采用纯滑动模型建立了该种电机的数学模型；并根据此模型，用MATLAB语言作了计算机仿真，得到了该种电机的开、关过程动态响应。     

Ultrasonic wave scattering in a fiber reinforced composite

I.IntroductionWiththerapiddevelopmentoffiberreinforeedcompositematerials,muchattcntionhasbeenpaidtothecva1uationofthefiber/matrixinterfaces[1-51wheredefectSmayemergeafterlongusageofthecomposites.Foraweakenedinterface,twostiffnessconstantsareusuallyin-tfoducedtomodc1theboundaryconditionsforthestressesanddisNacementsatbothsidesandtheyareclose1yrclatedtotheultrasonicattenuationduetoscattering['].However,sofarnopublishedrcportsarcavai1ab1e.Whitemadeadetailedinvestigationofsoundwavescatteringatac…     

A study on the spectral,microstructural, and magnetic properties of Eu–Nd double-substituted Ba0.5Sr0.5Fe12O19 hexaferrites synthesized by an ultrasonic-assisted approach

In this study, an examination on the spectral, microstructural, and magnetic characteristics of Eu–Nd double-substituted Ba_0.5Sr_0.5Fe₁₂O₁₉ hexaferrites (Ba_0.5Sr_0.5Nd_xEu_xFe_12−2xO₁₉ (x = 0.00–0.05) HFs) fabricated by an ultrasonic-assisted approach has been presented. An UZ SONOPULS HD 2070 ultrasonic homogenizer with frequency of 20 kHz and power of 70 W was used. The chemical bonding, structure and the morphology of the products were evaluated by Fourier-Transform Infrared (FT-IR) Spectroscopy, XRD (X-ray diffraction), scanning and transmission electron microscopy and techniques. The textural properties of the prepared nanomaterials were examined by using the Brunauer-Emmett-Teller (BET) method. The magnetic properties were studied using a vibrating sample magnetometer (VSM) at room temperature (RT) and low temperature 10 K. The magnitudes of various magnetic parameters including M_s (saturation magnetization), M_r (remanence) and H_c (coercivity) were estimated and evaluated. The M-H loops revealed the hard ferrimagnetic nature for all products at both temperatures. The M_s and M_r values showed a decreasing tendency with increasing degree of Eu³⁺ and Nd³⁺ substitutions whereas H_c values displayed an increasing trend. At RT, M_s, M_r and H_c values lie in the ranges of 63.0–68.8 emu·g⁻¹, 24.6–39.2 emu·g⁻¹ and 2252.4–2782.1 Oe, respectively. At 10 K, the values of M_s, M_r and H_c lie between 87.5–97.1 emu·g⁻¹, 33.5–40.1 emu·g⁻¹ and 2060.6–2417.2 Oe, respectively. The observed magnetic properties make the prepared products promising candidates to be applied in the recording media.     

Elastic behaviour of strontium-doped lanthanum calcium manganites in the vicinity of TC

Colossal magnetoresistance (CMR) manganites with compositional formula, La_0.67Ca_0.33−xSr_xMnO₃ (where x=0, 0.09, 0.11, 0.13, 0.33) were prepared by citrate gel route mainly to understand the elastic behaviour in the vicinity of their magnetic transition temperature T_C. The structural characterizations of all the materials clearly indicate that samples upto x=0.13 doping, are having orthorhombic structure with Pbnm space group and sample with x=0.33 is having rhombohedral structure with space group. The magnetic transition temperatures (T_C) are determined by AC susceptibility measurements and are found to increase continuously with increasing strontium concentration. Finally, a systematic investigation of the ultrasonic longitudinal velocities of all the samples was carried out. Further, all the samples are found to exhibit anomalous behaviour in the vicinity of their magnetic transition temperatures and the observed behaviour is explained using Landau's theory.     

应用微机数模转换接口控制小直流电机的转速

介绍了采用微机数模转换器接口技术实现对小直流电机转速控制的实验方案，并对实验结果进行了讨论．     

Study on the changes of ultrasonic parameters over supercritical Ni-Co electroplating process

This work discusses the influence of changes to ultrasound (US) parameters over the nickel cobalt (Ni-Co) metal thin film properties produced by supercritical CO₂ (SC-CO₂) electroplating. Additionally, Ni-Co films were produced by conventional electroplating and silent SC-CO₂ and compared against each other.The discussion on metal thin film properties revolves around variations to the bath type ultrasonic power (15 W and 20 W) and frequency (42 k Hz and 72 kHz) during experiments. The properties provided by the three electroplating processes and analyzed include: grain sizes, film elemental content analyses, surface microstructures, film hardness, corrosion resistance, surface roughness, crystalline structure and preferential growth, etc. From the results it was clear that quality of films produced by US-SC-CO₂ was improved compared to that of films produced by silent SC-CO₂, which itself was better than those produced by conventional electroplating. However, when US power was varied we observed a decline in the mechanical properties of the produced films.The combination of ultrasonic agitation with SC-CO₂ allows for improved mechanical properties such as: lower surface roughness, finer grain size and surface morphologies, increased corrosion resistance and film hardness. The ultrasound agitation applied to SC-CO₂ electroplating enhanced the formation of alloyed metal as ultrasonic agitation increased the electrolyte flowability during electroplating process resulting in increased mass transfer while at the same time achieving a surface cleaning effect which removed metal ions with poor adhesion and other unwanted particles. Moreover, application of ultrasonic agitation avoids the use of surfactants so only changes to the physical phenomena and no changes to the chemical composition of the deposited thin films were observed, meaning less pollution to the electrolyte and higher purity of the deposited films.The US-SC-CO₂ electroplating method described in this work effectively enhanced the mechanical properties of the deposited thin films compared to those produced by both silent SC-CO₂ and conventional electroplating processes.     

Ultrasound assisted preparation of calcium alginate beads to improve absorption of Pb+2 from water

Calcium alginate (CaAlg) beads were prepared using ultrasound for use in the removal of lead from natural and wastewaters by ion exchange. Ultrasound was applied in a batch mode with an ultrasonic bath or in a flow mode using an ultrasonic clamp-on device. For comparison purposes the synthesis was performed in batch mode in the absence of the ultrasound. The beads prepared using ultrasound showed a greater ion exchange capability which could be ascribed to a larger specific surface area as a result of surface roughening induced by cavitation.Scanning Electron Microscopy (SEM) images revealed that the roughening was in the form of corrugation for the product with the best ion exchange capability obtained in the flow process where preformed CaAlg droplets were subjected to ultrasound during the setting process. These beads performed 11% better for lead removal than those synthesized in the absence of ultrasound.