Fast Electrochemical Characterization of Historical Glasses Using Carbon Screen‐Printed Electrodes and Ultrasonic Assisted Sampling

A new method for lead oxide (PbO) analysis in glasses, using a carbon screen printed electrode (SPE) is proposed. A suspension of the powdered glass sample in nitric acid is prepared using an ultrasonic probe, 100 µL of slurry are deposited on the SPE and the voltammetric measurement is carried out. Structural information of PbO in the glass matrix is obtained by CV. Lead quantification is performed by DPV. In the best conditions a LOD of 2.30 wt% of PbO was obtained. The method has been applied with good results in the analysis of historical glasses samples.     

Reversed Capillary Electrochromatography: Investigation of Peak Symmetry for Eluting Curves of Solutes

Summary A clean method without use of organic solvents has been developed for isolation and high-performance liquid chromatographic (HPLC) determination of oxytetracycline (OTC) and sulphadimidine (SDD) in cow's milk. Isolation is rapid and simple—homogenization with an inorganic acid solution by means of a handy ultrasonic homogenizer, which is easy-to-use and portable, followed by centrifugation. Reversed-phase HPLC was performed on a C₄ column, with 1.25 mmol L⁻¹ succinic acid solution as mobile phase, and identification was by means of a photodiode-array detector. Separation of the analytes was achieved in less than 8 min. Significant linearity was established over the concentration range of 0.1–1.0 μg mL⁻¹ for both target compounds (r>0.99,P<0.01). Average recoveries of OTC and SDD (each spiked at 0.1–1.0 μg mL⁻¹) were ≥88.8, and inter- and intra-assay variability was ≤2.8%. The total time required for analysis of one sample was <20 min. The limits of quantitation of the method (μg mL⁻¹ in milk) were 0.044 for OTC and 0.023 for SDD. No organic solvent was used at any stage of the analysis.     

Gel permeation chromatographic characterization of sodium hyaluronate and its fractions prepared by ultrasonic degradation

Summary High-molecular-weight sodium hyaluronate isolated from rooster combs was degraded by ultrasonication. The molecular weight of hyaluronate and its polydispersity was determined by gel-permeation chromatography. During 75-min treatment the molecular weight value decreased from 1.39×10⁶ Da to 2.25×10⁵ Da while the polydispersity of the molecular weight increased from 1.29 to 2.36. The reciprocal value of the square of the hyaluronate's molecular weight was linearly proportional to the time of ultrasonication.     

氟涂料中全氟辛酸(PFOA)及其盐类物质测定的气相色谱质谱法

全氟辛酸(perfluorooctanoic acid,PFOA)是一种强酸[1],分子式为C8HF15O2,是常用的氟表面活性剂,具有很强的疏水性和疏油性,广泛用于油库、机场、军事设施等场所的消防材料中,也是氟涂料、氟塑料和有机氟织物整理剂等的生产过程中不可缺少的原料。全氟辛酸具有中等毒性的肝致癌     

超声辐照引发MMA微乳液聚合

研究了超声波引发甲基丙烯酸甲酯(MMA)的微乳液聚合.辐照40min时单体转化率高达90%.透射电镜观察发现,PMMA微乳液平均粒径为36.5nm,粒径分布窄,表明超声波引发是制备PMMA微乳液的有效方法.采用分光光度计对微乳液聚合过程中乳胶粒的形成和大小进行了间接表征,研究了超声功率输出、乳化剂、助乳化剂、单体和引发剂对MMA微乳液聚合的影响.     

超声提取-反相高效液相色谱法测定棉仁中游离棉酚

用超声提取对棉仁进行预处理,探讨了影响棉酚提取率的因素,确定其最佳提取条件为:料液比0.1∶15(g/mL),提取时间50min,超声功率90W。在最佳提取条件下,棉仁中游离棉酚的平均提取率为6.3282 mg/g。利用反相高效液相色谱(RP-HPLC)法测定棉仁中游离棉酚含量,使用SinoChrom ODS-BP C18色谱柱(200×4.6mm,5μm),流动相为甲醇-1%磷酸水溶液(体积比85∶15),流速为0.9mL/min,紫外检测波长为238nm。结果表明,棉酚在0.0044～0.0352mg/mL范围内与色谱峰面积呈良好线性关系,线性相关系数为0.9998,平均加标回收率在98.80%～99.03%之间。该法快速、灵敏、准确,适用于棉仁中游离棉酚的定量分析。     

Ultrasonic and ir investigations of N–H bond complexes

Complex formation of 1?:?1 mixtures of naphthols, viz. (α-naphthol and β-naphthol) with triethylamine in benzene have been studied at a frequency of 2?MHz in the concentration range of 0.010–0.090 and at varying temperatures of 30, 40 and 50°C. Using the measured ultrasonic velocity, the thermoacoustical parameters such as adiabatic compressibility, intermolecular free length, molar sound velocity, molar compressibility and acoustic impedance have been calculated. The ultrasonic velocity shows a maxima and adiabatic compressibility shows a corresponding minima as a function of concentration for these mixtures. These, in turn, are used to study the solute–solute interaction and the possibility of complex formation between unlike molecules of naphthols and triethylamine through intermolecular hydrogen bonding. The hydrogen bond is formed between hydrogen atom of naphthols and nitrogen atom of triethylamine molecule. The result obtained using infrared spectroscopy for both the systems also supports the existence of complex formation through intermolecular hydrogen bonding.     

气相色谱法测定车用汽油中含氧化合物和苯胺类化合物

利用中心切割技术和双毛细管色谱柱系统,采用两次进样的方式,建立了气相色谱测定车用汽油中含氧化合物和苯胺类化合物的分析方法。第一次进样分析,组分首先进入非极性DB-1色谱柱(30 m×0.32 mm×1.0μm),按沸点由低到高的顺序分离,通过电磁阀切换将沸点小于2-己酮的组分切割至强极性GS-OxyPLOT色谱柱(10 m×0.53 mm×10μm)或CP-Lowox色谱柱(10 m×0.53 mm×10μm),其余重烃组分通过阻尼柱进入FID检测器。在GS-OxyPLOT或CP-Lowox色谱柱上,烃类组分与含氧化合物分离并进入检测器检测,消除了大量的烃类组分对含氧化合物测定的影响。第二次进样分析,设定电磁阀切换时间为间-甲基苯胺从非极性色谱柱流出的时间,苯胺类化合物在GS-OxyPLOT或CP-Lowox色谱柱上与烃类和含氧化合物分离并进入检测器检测。以乙二醇二甲基醚为内标化合物进行内标法定量。实现了在一套系统上同时测定车用汽油中添加的甲基叔丁基醚(MTBE)、甲醇、甲缩醛、乙酸仲丁酯、乙酸乙酯、苯胺、邻/间/对-甲基苯胺和N-甲基苯胺的含量,各组分的检测范围为0.01%~10%(质量分数),回收率为86.0%~102.6%。该法可以为车用汽油的质量控制提供有效的检测手段。     

Determination of arsenic in sediments, coal and fly ash slurries after ultrasonic treatment by hydride generation atomic absorption spectrometry and trapping in an iridium-treated graphite tube

A simple and reliable method for the determination of arsenic in sediment and in coal without sample digestion, based on hydride generation from slurry samples is proposed. After grinding the samples to a particle size of 50 μm, the sample powder was mixed with aqua regia and hydrofluoric acid in an ultrasonic bath for 30 min. After diluting the mixture with hydrochloric acid, the slurry was allowed to stand for 48 h, and an aliquot was used for hydride generation with sodium borohydride. More than 80% of the arsenic was leached to the aqueous phase under these conditions, except for one sediment sample with very high silica content. The generated arsine was collected in a graphite tube, treated with 0.5 mg of iridium as a permanent modifier, and the arsenic determination was carried out by electrothermal atomic absorption spectrometry. The same tube could be used for at least 160 cycles without any re-treatment. The greatest advantage of the method was that only a minimum of reagents and sample handling were required, reducing the risks of contamination and/or analyte loss. However, the addition calibration technique had to be used in order to obtain results within the 95% confidence level for 11 certified reference materials, 5 sediments, 5 coals and one coal fly ash. One certified sediment slurry was spiked with the analyte and the resulting addition calibration curve was used for the analysis of the certified sediments. Similarly, one certified coal was used to obtain the addition calibration curve for the coal and coal fly ash samples. The recoveries of the certified values, except for one sediment, were between 91 and 115%. The limits of detection in the samples were 0.54 and 0.7 μg g⁻¹ for the coal and sediment samples, respectively, obtained for 1 ml of slurry containing 1 mg of sample.     

Effect of ultrasound on the synthesis of low-modulus zeolites from a metakaolin

It was studied the effect of ultrasonic processing (22 kHz) of the aqueous suspension of metakaolin, sodium hydroxide and alumina with a molar ratio 2Al₂Si₂O₇:12NaOH:2Al₂O₃ on the low-modulus zeolite synthesis processes. To investigate the XRD, SEM, IR, EDS had been used. It was shown that after ultrasonic processing, sodium aluminates are formed, what leads to a change in process of further synthesis. It was found that without ultrasonic processing on the stage of thermal treatment at 650 °C, SOD zeolite (|Na₆|[Al₆Si₆O₂₄]) and sodium aluminosilicate (Na₆Al₄Si₄O₁₇) are synthesized. In the sample after ultrasound during thermal treatment, only sodium aluminosilicates of cubic syngony (Na₆Al₄Si₄O₁₇ and Na₈Al₄Si₄O₁₈) are formed. It was demonstrated that sodium aluminosilicates are precursors for the formation of LTA zeolite (|Na₁₂|[Al₁₂Si₁₂O₄₈]). As a result zeolitization of sodium aluminosilicates after the hydrothermal crystallization in alkaline solution, the sonicated sample contained 97 wt% LTA. Without ultrasonic processing, the product of synthesis contained 50 wt% SOD and 40 wt% LTA.