Effect of ultrasound on the synthesis of low-modulus zeolites from a metakaolin

It was studied the effect of ultrasonic processing (22 kHz) of the aqueous suspension of metakaolin, sodium hydroxide and alumina with a molar ratio 2Al₂Si₂O₇:12NaOH:2Al₂O₃ on the low-modulus zeolite synthesis processes. To investigate the XRD, SEM, IR, EDS had been used. It was shown that after ultrasonic processing, sodium aluminates are formed, what leads to a change in process of further synthesis. It was found that without ultrasonic processing on the stage of thermal treatment at 650 °C, SOD zeolite (|Na₆|[Al₆Si₆O₂₄]) and sodium aluminosilicate (Na₆Al₄Si₄O₁₇) are synthesized. In the sample after ultrasound during thermal treatment, only sodium aluminosilicates of cubic syngony (Na₆Al₄Si₄O₁₇ and Na₈Al₄Si₄O₁₈) are formed. It was demonstrated that sodium aluminosilicates are precursors for the formation of LTA zeolite (|Na₁₂|[Al₁₂Si₁₂O₄₈]). As a result zeolitization of sodium aluminosilicates after the hydrothermal crystallization in alkaline solution, the sonicated sample contained 97 wt% LTA. Without ultrasonic processing, the product of synthesis contained 50 wt% SOD and 40 wt% LTA.     

连续臂丛神经阻滞镇痛对断指再植血流动力学影响的研究

目的研究连续臂丛神经阻滞镇痛对断指再植术后再植指血流动力学的影响，探讨其缓解血管痉挛、增加血流量的可行性。方法将60例急诊行断指再植术患者按随机数字表法分为术后连续臂丛神经阻滞镇痛组（CA组）和对照组（NA组），每组30例。观察两组患者再植指术后血管痉挛、血管栓塞和指体坏死发生例数并计算再植指成活率，记录两组术后即刻（T1）、术后24h（T2）再植指固有动脉血流动力学参数及动脉内径（AD）、远指端血氧饱和度（SpO2）和温度（Ts）变化。结果断指再植术后成活率CA组高于NA组，血管痉挛、血管栓塞和指体坏死发生率CA组均低于NA组，差异均有统计学意义（均P＜0.05）。在T2时CA组各项血流动力学参数、AD、SpO2、Ts均高于NA组，阻力指数（RI）低于NA组，差异均有统计学意义（均P＜0.05）。结论术后连续臂丛神经阻滞镇痛可以缓解再植指固有动脉痉挛，增加指体血流量，提高了断指再植的成功率。     

Broadband and high efficiency metal multi-layer dielectric grating based on non-quarter-wave coatings as a reflective mirror

This article deals with designing a broadband and high efficiency metal multi-layer dielectric grating (MMDG) used to compress and stretch an ultrashort laser pulse. The diffraction characteristics of the MMDG are analysed by using the rigorous coupled-wave method. The multi-layer dielectric used as the reflective mirror is made up of non- quarter-wave coatings. Taking the diffraction efficiency of the 1 order as the value of merit function, the parameters such as groove depth, residual thickness, duty cycle, and reflective mirror are optimized to obtain broadband and high diffraction efficiency. The optimized MMDG shows an ultra-broadband working spectrum with the average efficiency exceeding 97% over 160 nm wavelength centred at 1053 nm and TE polarization. The optimized MMDG should be useful for chirped pulse amplification.     

Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating

We demonstrate a new type of fiber optic bend sensor with a hybrid structure made up of a long period grating (LPG) and a tilted fiber Bragg grating (TFBG). The sensing mechanism is based on the spectrum of power transfers between the core and cladding modes from a TFBG located downstream from a LPG. We show that the curvature of a beam can be determined by the reflected power difference between the core mode and the recoupled cladding modes. We further provide design rules for the LPG and TFBG to optimize and linearize the sensor response. In addition, the temperature cross-sensitivities of this configuration are also investigated for two different types of fiber.     

Patterning Flexible Substrates Using Surface Relief Structures in Azobenzene Functionalized Polymer Films

A novel method for maskless micro-patterning of polymeric substrates is presented. First, an azobenzene functionalized polymer film is spin-coated on a Poly (ethylene terephthalate) (PET) sheet. Then surface relief structures are optically inscribed on the polymer film by interference of laser beams. The patterned azobenzene functionalized film is then etched in the plasma chamber such that the gratings are transferred to the PET substrate. Finally, any remaining azobenzene functionalized polymer is dissolved away using an appropriate solvent. This method of patterning can be broadly applied to a variety of flexible/polymeric substrates and the resolution is not limited by the substrate thermo-mechanical properties.     

Fabrication of Gold Nano‐Structures with Azopolymer Templates

Fabrication of gold nano‐patterns has been demonstrated employing surface relief structures created on films of an azobenzene‐functionalized polymer as templates. The surface relief templates were photoinscribed on the azopolymer films in one‐step with two laser beams. Thin layers of gold were over‐coated on the polymer templates by thermal evaporation. Gold lines of a few hundred nanometer width were successfully fabricated by pyrolyzing the azobenzene polymer. Sub‐micron gold dots were also created. The resulting gold structures exhibited the same periodicity as the polymer templates.     

Determination of Pd,Rh, Pt,Au in road dust by electrothermal vaporization inductively coupled plasma mass spectrometry with slurry sampling

Inductively coupled plasma mass spectrometry coupled with ultrasonic slurry sampling electrothermal vaporization (USS-ETV-ICP-MS) has been applied to determine Pd, Rh, Pt and Au in 0.5% m/v slurries of several road dust samples. 2% m/v ammonium pyrrolidine dithiocarbamate (APDC) was used as the modifier to enhance the ion count. The influence of instrument operating conditions, slurry preparation and interferences on the ion count was reported. This method has been applied to the determination of Pd, Rh, Pt and Au in BCR 723 Road Dust and NIST SRM 2709 San Joaquin Soil reference materials and two road dust samples collected locally. The analysis results of the standard reference materials agreed with the certified values. Precision between sample replicates was better than 10% for all the determinations. The method detection limits estimated from standard addition curves were 0.9, 0.4, 0.6 and 0.4 ng g⁻¹ for Pd, Rh, Pt and Au, respectively, in original dust samples.     

Broadband dielectric characterization of piezoelectric poly(vinylidene fluoride)thin films between 278 K and 308 K

This work describes the dielectric properties of piezoelectric poly(vinylidene fluoride) (PVDF) thin films in the frequency and temperature ranges relevant for usual applications. We measured the isothermal dielectric relaxation spectra of commercial piezoelectric PVDF thin films between 10 Hz to 10 MHz, at several temperatures from 278 K to 308 K. Measurements were made for samples in mechanically free and clamped conditions, in the direction of the poling field (perpendicular to the film). We found that the imaginary part of the dielectric relaxation spectra of free and clamped PVDF samples is dominated by a peak, above 100 kHz, that can be characterized by a Havriliak-Negami function. The characteristic time follows an Arrhenius dependence on temperature. Moreover, the spectra of the free PVDF samples show two additional peaks at low frequencies which are associated with mechanical relaxation processes. Our results are important for the characterization of piezoelectric PVDF, particularly after the stretching and poling processes in thin films, and for the design and characterization of a broad range of ultrasonic transducers.