Cavitation mechanism in cyanobacterial growth inhibition by ultrasonic irradiation

To prevent cyanobacterial bloom in eutrophic water by ultrasonic method, ultrasonic irradiations with different parameters were tested to inhibit Spirulina platensis from growth. The experimental result based on cyanobacterial growth, chlorophyll a and photosynthetic activity showed that, the ultrasonic irradiation inhibited cyanobacterial proliferation effectively, furthermore the inhibition effectiveness increased in the order: 200 kHz>1.7 MHz>20 kHz and became saturated with the increased power. The inhibition mechanism can be mainly attributed to the mechanical damage to the cell structures caused by ultrasonic cavitation, which was confirmed by light microscopy and differential interference microscopy. The optimal frequency of 200 kHz in cavition and sonochemistry was also most effective in cyanobacterial growth inhibition. The higher frequency of 1.7 MHz is weaker than 20 kHz in cavitation, but has more effective inhibition because it is nearer to the resonance frequency of gas vesicle. The inhibition saturation with ultrasonic power was due to the ultrasonic attenuation induced by the acoustic shielding of bubbles enclosing the radiate surface of transducer.     

An efficient calculation algorithm for focusing by plane ultrasonic transducers

In the present paper, we simulate focused wave fields generated by a system of plane transducers used in an immersion ultrasonic technique. The ultrasonic beam penetrates into the elastic medium through the fluid-solid boundary. A real-time computer algorithm is proposed to calculate stress components in the solid medium. It is shown that a good focusing wave structure can be provided by a pair of plane rectangular transducers, inclined with respect to each other and to the beam acoustic axis.     

IMPROVED PROPERTIES OF METALLOCENE-CATALYZED LINEAR LOW-DENSITY POLYETHYLENE/POLYPROPYLENE BLENDS DURING ULTRASONIC EXTRUSION

Metallocene-catalyzed linear low-density polyethylene/polypropylene （mLLDPE/PP） blends were prepared by ultrasonic extrusion in this work. Their extrusion processing behaviors were estimated by online measured data, such as the die pressure and flow rate. Crystallization and mechanical properties of the blends were also investigated. The results show that the addition of PP improves the processing behaviors of mLLDPE, but has little effect on its mechanical properties. On the other hand, the addition of mLLDPE improves the impact strength of PP, but has little effect on its processing behavior. The processing behaviors and mechanical properties of mLLDPE/PP blends get further improved due to the presence of ultrasonic oscillation during extrusion. Compared with PP-rich blends, the apparent viscosity drop of mLLDPE-rich blends is more sensitive to ultrasonic oscillation. The ultrasonic oscillation affects the crystal nucleation, while barely the other crystalline behaviors of the blends.     

Size exclusion chromatographic characterization of sodium hyaluronate fractions prepared by high energetic sonication

Summary A high molecular weight sodium hyaluronate isolated from rooster combs was degraded by ultrasonication. High-performance size exclusion chromatography allowed rapid and accurate determination of molecular weight parameters (M_z, M_w, M_n) and distributions. The time dependence of hyaluronan ultrasonication to the molecular characteristics of the polymer was investigated. A non-random nature of the degradation process was demonstrated and the reciprocal M_n value was found to be linearly proportional to the time of ultrasonication.     

羧甲基纤维素系列高分子表面活性剂超声合成的研究

研究了在超声波作用下羧甲基纤维素的降解反应及ＣＭＣ与具有不同亲水亲油比值的活性大单体「烷基醇（酚）聚氧乙烯醚丙烯酸酯及第三单体」的超声共聚反应。经萃取提纯的共聚产物用ＩＲ，＾１３Ｃ ＮＭＲ和ＵＶ等方法进行表证，证实通过超声反应制得了二元和三元共聚物。     

Amperometric detection of hydrazine by cyclic voltammetry and flow injection analysis using ruthenium modified glassy carbon electrodes

Glassy carbon electrodes modified with (5-amino-1,10-phenanthroline)bis(bipyridine)ruthium(II) chloride hydrate, [(bpy)₂Ru(5-phenNH₂)]Cl₂·H₂O, are shown to oxidize hydrazine with excellent sensitivity. The presence of an amine group on the ruthenium complex facilitates electropolymerization onto the electrode surface. Using cyclic voltammetry, a large catalytic current is observed upon oxidation of hydrazine in phosphate buffer (pH 5.0), compared to the current obtained from the ruthenium-modified electrode with no hydrazine present. The sensitivity of cyclic voltammetry is sufficient for obtaining a linear calibration curve for hydrazine over the range of 10⁻⁵ to 10⁻² M. Hydrodynamic amperometry was used to determine the working potential for flow injection analysis. The limit of detection for hydrazine was determined to be 8.5 μM using FIA. The thickness of these films was shown to increase linearly with the number of electropolymerization cycles, in the range of 1000-2500 nm for 5-20 cycles, respectively, using Rutherford backscattering spectrometry (RBS). RBS analysis also suggests that the film is multilayered with the outermost layers containing a high ruthenium concentration, followed by layers where the concentration of ruthenium decreases linearly and approaches zero at the electrode surface.     

人参中总皂甙的超声波快速提取方法研究

建立了人参中总皂甙超声波半微量快速提取方法，与索氏提取法相比，此法提取时间由索氏法的1－2个工作日缩短到30min，节省大量试剂，综合提取效率提高数十倍，与索氏提取法对照分析表明，此法可完全满足人参中总皂甙的快速测定要求。     

Reflection of electrons and photons from solids bombarded by 0.1 - to 100-MeV electrons

Electron and photon reflection ratios (in number and energy) for absorbers bombarded by electrons have been computed with the ITS Monte Carlo system version 3. Electrons of energies from 0.1 to 100 MeV have been assumed normally incident on an effectively semi-infinite absorber. The absorbers considered are elemental solids of atomic numbers from 4 to 92. The data on the electron reflection ratios agree rather well with the experimental data collected from literature except some discrepancies when the number-reflection ratio is small. For photons, the number-reflection ratio increases with increasing energy, but the energy-reflection ratio shows a maximum around 10 MeV. Empirical equations for the electron reflection ratios and the photon energy-reflection ratio are given (for electrons, graphs only).     

水溶性量子点纳米微球的制备、表征及其在生物检测中的应用

通过超声乳化(O/W)法, 在CdSe/CdS荧光量子点外包覆一层双亲性高分子外壳, 制得水溶性量子点纳米微球. 用荧光发射光谱(PL)和透射电子显微镜(TEM)等手段对产品进行了表征. 结果表明, 此种方法简单易行, 制得的量子点纳米微球(70 nm)具有良好的水溶性、稳定性以及较强的荧光发射强度. 用这种改性后的量子点标记的免疫球蛋白分子能够识别专一抗原, 因此这种纳米粒子将有望进一步应用于生物检测.     

薄层色谱-紫外可见分光光度法测定食品中的苏丹红Ⅰ号

建立了测定食品中苏丹红Ⅰ号新方法:薄层色谱-紫外可见分光光度法.方法的线性回归方程为:A=0.00583 0.15105ρ,在0.50～10.0 μg/mL之间苏丹红Ⅰ号的浓度与吸光度之间呈线性关系,相关系数R=0.9992,检出限为0.05 μg/mL.测定结果与国家标准HPLC法对照,令人满意.可用于食品中苏丹红Ⅰ号的测定.