Wide viewing optically clear adhesives using PMMA/TiO2 core-shell micro/nanoparticles

Abstract

Optically clear adhesives (OCAs) are widely used in optoelectronic displays because of their high outdoor visibility. Here, we develop new transparent adhesive films with wide-viewing-angle characteristics using poly(methyl methacrylate) (PMMA)/TiO₂ core–shell micro/nanoparticles. TiO₂ nanoparticles are embedded in the shell of PMMA microparticles, forming an organic–inorganic hybrid structure. To examine the optical transmittance of the films in the visible wavelength region, ultraviolet-visible spectroscopy is performed and light diffusion is evaluated. The TiO₂ nanoparticles in the shell of the PMMA microparticles exhibit improved light scattering, and the new functional OCAs are expected to provide wide-viewing-angle characteristics for future flexible displays.     

石英砂粒径对水合物沉积物力学性质的影响

利用自主研发的水合物沉积物原位合成与力学性质测试的高压低温三轴仪,通过多级加荷的试验方法,以不同粒径的砂粒作为沉积物骨架进行三轴压缩试验,得到了剪切过程的应力-应变关系曲线,以及不同粒径尺寸沉积物的强度,还有剪切过程中的体积变化关系。结果表明:含水合物沉积物强度随着沉积物粒径尺寸的增大而增强;在降压剪切过程中,所有粒径的水合物沉积物式样均有明显的剪缩现象。     

基于粒子滤波的运动目标光电定位仿真研究

运动目标的光电定位不能像静止目标那样简单做均值滤波,鉴于此,引入粒子滤波算法,它不仅可以应用于线性系统,而且还适用于非线性系统。结合光电定位需求,详细推导了计算公式及初值和参数选取公式,对只含测量噪声以及含有测量和运动噪声等的海面运动目标光电无源定位算法进行了仿真计算,验证了算法的有效性,讨论了噪声强度对滤波效果的影响,滤波参数选择对滤波效果的影响,目标运动方式对滤波跟随性的影响,重采样算法对滤波效果的影响等。所得结论为:粒子滤波可用于运动目标光电定位过程,可有效降低定位误差;粒子滤波算法具有较强鲁棒性,适用于噪声较大、目标运动形态变化大等情况。     

非PLL相位平均型参考线原型验证

射频相位参考线是粒子加速器的重要组成部分之一,为射频低电平控制系统(LLRF)、束流诊断系统、定时系统等提供稳定的相位锁定参考信号。为减少远距离传输过程中由环境温度变化导致的射频传输线中的射频相位漂移,多个加速器装置中已经采用射频相位参考线提供射频相位参考,这些相位参考的实现方案主要是基于恒温控制和基于光纤锁相。与这些方案相比,采用相位平均方法不仅可以保持长距离节点之间的相位稳定,而且更易于现场安装与维护。现有的带有锁相环(PLL)的终端短路方式实现相位平均参考线的方案仍有一些节点数量限制等方面的不足,本文对相位平均参考线结构进行了去除PLL的简化设计并进行了验证,以期增加更多的相位分配节点以及降低对射频器件参数的要求。对非PLL的单端输入终端短路相位平均方案与两端输入各节点间互为参考的相位平均方案分别进行了实验测试,结果表明两者的相位RMS精度可以达到0.1°~0.3°。并对不同的相位平均实现方案中相位不稳定的产生原因进行了分析,结果表明,除环境温度外,同轴线缆材质、合成相位与幅度的不平衡合成等也是重要影响因素。     

Doublet bands at borders of A ≈ 130 island of chiral candidates: Case study of ~(120)I

Positive-parity doublet bands were reported in ~(120)I. Based on these, we discuss the corresponding experimental characteristics, including rotational alignment, and re-examine the corresponding configuration assignment.The self-consistent tilted axis cranking relativistic mean-field calculations indicate that the doublet bands are built on the configuration πh_(11/2)■νh_(11/2)~(-1). By adopting the two quasiparticles coupled with a triaxial rotor model, the excitation energies, energy staggering parameter S(I), B(M1)/B(E2), effective angles, and K plots are discussed and compared with available data. The obtained results support the interpretation of chiral doublet bands for the positive-parity doublet bands in ~(120)I, and hence identify this nucleus as the border of the A ≈ 130 island of chiral candidates.     

驻波声场中单分散细颗粒的相互作用特性

利用外加声场促进悬浮在气相中的细颗粒发生相互作用,进而引起颗粒的碰撞和凝并,使得颗粒平均粒径增大、数目浓度降低,是控制细颗粒排放的重要技术途径.为探究驻波声场中单分散细颗粒的相互作用,建立包含曳力、重力、声尾流效应的颗粒相互作用模型,采用四阶经典龙格-库塔算法和二阶隐式亚当斯插值算法对模型进行求解.将数值模拟得到的颗粒声波夹带速度和相互作用过程与相应的解析解和实验结果进行对比,验证模型的准确性.进而研究颗粒初始条件和直径对相互作用特性的影响.结果表明,初始时刻颗粒中心连线越接近声波波动方向、颗粒位置越接近波腹点,颗粒间的声尾流效应就越强,颗粒发生碰撞所需要的时间就越短.研究还发现,颗粒直径对颗粒相互作用的影响取决于初始时刻颗粒中心连线偏离声波波动方向的程度.当偏离较小时,颗粒直径越大,颗粒发生碰撞所需要的时间越短;当偏离很大时,直径较小的颗粒能够发生碰撞,而直径较大的颗粒则无法发生碰撞.     

纳米粒子在乙炔聚合反应中的催化作用

纳米粒子在乙炔聚合反应中的催化作用王彦妮，张志琨，崔作林（青岛化工学院纳米材料研究所，青岛２６６０４２）关键词纳米粒子，乙炔，聚合反应，催化作用纳米粒子具有较大的比表面积，因而具有传统材料所没有的独特的光、电、磁等性能．对纳米粒子的研究始于６０年代．...     

Fe／ZrO_2气凝胶超细粒子催化剂的制备、表征及F－T反应性能的研究

用超临界流体干燥法制备出大孔高比表面高分散态Ｆｅ／ＺｒＯ_２气凝胶超细粒子催化剂，研究了在其制备过程中织构性质、颗粒大小、体相和表面结构的变化，并与普通浸渍法制备的Ｆｅ／ＺｒＯ_２催化剂作了对比。对几种Ｆｅ／ＺｒＯ_２催化剂的Ｆ－Ｔ反应性能考察表明，Ｆｅ／ＺｅＯ_２气凝胶超细催化剂显示出高的反应活性；随载体ＺｒＯ_２颗粒尺寸减小，活性组分铁的分散度变大，其颗粒尺寸变小，催化剂比表面积增大，反应活性增大，甲烷和低碳烃生成量增加，重质组分减少，认为产物烃分布主要受催化剂活性相颗粒尺寸效应制约。     

Particle number density and velocity distributions in laser plumes

A time-of-flight mass spectrometer with electron impact ionization facility was used in investigations of the laser plume structure. Densities and velocity distributions of positively charged and neutral species were measured 12 cm downstream of the target. Velocities of particles in a plume were measured by the retarding potential method. The combination of a skimmer and declining electric field was used to suppress the influence of charged particles during the measurement of the neutral component parameters. In the case of YBaCuO ceramic laser ablation, a strong variation of the laser-induced plume composition was observed from its head to its tail. It seems to be accounted for by the difference of the starting (phase transition) temperatures of various layers of a plume. Ions detected mainly in the head of a plume were followed by atoms, molecules and clusters in inverse succession to their appearance in the plume under the light intensity increase. The characteristic of the number density dependence upon the laser spot diameter make it clear that most of the molecules BaO and YO are the direct product of ablation. In contrast, the detected clusters with masses up to 2000 amu are the product of condensation in the expanding plume under the conditions of the experiments.     

氧化物表面单层改性对SnO2超微粒子热稳定性的影响

研究了氧化物在气敏材料二氧化锡超细粉表面的分散行为及分散量的二氧化锡热稳定性的影响,结果表明,氧化铜,氧化镍,氧化铋和氧化锌在二氧化锡表面均能单层分散,分散阈值均与按密置单层模型计算的最大分散容量相符,负载二氧锡的表面覆盖度与其稳定性之间有很好的对应关系,单层覆盖率达到一定程度二氧化锡高温烧结便可基本得到抑制。