Examination of the Degreasing of Metal Surfaces by the Use of a Plasma Torch

Metal surfaces can be degreased via a combustion reaction upon the metal surface by the use of a plasma torch jet. The required energy and the reaction rate of the combustion reaction are examined here. It turns out that the reaction rate can limit the cleaning performance. In such case, the cleaning performance is not improved at higher powers. It is suggested to increase the temperature at which combustion takes place such that the cleaning performance can improve again at higher powers. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Shadow-casted ultrathin surface coatings of titanium and titanium/silicon oxide sol particles via ultrasound-assisted deposition

Ultrasound-assisted deposition (USAD) of sol nanoparticles enables the formation of uniform and inherently stable thin films. However, the technique still suffers in coating hard substrates and the use of fast-reacting sol–gel precursors still remains challenging. Here, we report on the deposition of ultrathin titanium and titanium/silicon hybrid oxide coatings using hydroxylated silicon wafers as a model hard substrate. We use acetic acid as the catalyst which also suppresses the reactivity of titanium tetraisopropoxide while increasing the reactivity of tetraethyl orthosilicate through chemical modifications. Taking the advantage of this peculiar behavior, we successfully prepared titanium and titanium/silicon hybrid oxide coatings by USAD. Varying the amount of acetic acid in the reaction media, we managed to modulate thickness and surface roughness of the coatings in nanoscale. Field-emission scanning electron microscopy and atomic force microscopy studies showed the formation of conformal coatings having nanoroughness. Quantitative chemical state maps obtained by x-ray photoelectron spectroscopy (XPS) suggested the formation of ultrathin (<10 nm) coatings and thickness measurements by rotating analyzer ellipsometry supported this observation. For the first time, XPS chemical maps revealed the transport effect of ultrasonic waves since coatings were directly cast on rectangular substrates as circular shadows of the horn with clear thickness gradient from the center to the edges. In addition to the progress made in coating hard substrates, employing fast-reacting precursors and achieving hybrid coatings; this report provides the first visual evidence on previously suggested “acceleration and smashing” mechanism as the main driving force of USAD.     

繁昌窑址附近多种瓷土成分分析

繁昌窑青白瓷胎体配方工艺一直停留在理论推理阶段，尚未有确凿的测试数据和模拟实验加以证实。为深入探究繁昌窑的胎料配方工艺，选取了繁昌窑址附近的多种瓷土样品进行了测试分析，并采用了古代制瓷工艺进行了模拟烧制。主要运用了波长色散X射线荧光光谱法(WDXRF)、红外光谱（FTIR）和X射线衍射（XRD）等光谱分析方法对瓷土成分进行测试；借助同步热分析（TG-DSC）对样品烧造温度进行了探索；通过模拟烧制陶瓷样品，对繁昌窑青白瓷的烧制工艺进行了研究，并对烧制的陶瓷样品进行显微结构分析。研究表明，繁昌窑附近的几种瓷土无论是单独制胎还是添加高岭土混合制胎，其烧成温度皆接近古代繁昌窑青白瓷的烧制温度。繁昌窑附近的瓷土是可以作为制作古代青白瓷的原料之一，但由于其中的铝含量较低，不能单独用来制作青白瓷胎体的原料，繁昌窑青白瓷在制作过程中应添加了其他富铝类原料。该研究对探索古代繁昌青白瓷的生产工艺及其蕴含的科学价值，提升繁昌窑在中国陶瓷工艺技术发展史上的地位等具有重要的学术意义，并可为现代陶瓷产业技术改进提供有益启示。     

冷冻电镜技术——2017年诺贝尔化学奖介绍

介绍了2017年诺贝尔化学奖的3位获得者在冷冻电镜领域的主要贡献，同时介绍了冷冻电镜技术的用途、一般工作流程和其局限性，以及中国学者在冷冻电镜技术应用研究中的贡献。     

Combined protein A imprinting and cryogelation for production of spherical affinity material

Cryogels have been demonstrated to be efficient when applied for protein isolation. Owing to their macroporous structure, cryogels can also be used for treating particle‐containing material, e.g. cell homogenates. Another challenging development in protein purification technology is the use of molecularly imprinted polymers (MIPs). These MIPs are robust and can be used repeatedly. The paper presents a new technology that combine the formation of cryogel beads concomitantly with making imprints of a protein. Protein A was chosen as the print molecule which was also be the target in the purification step. The present paper describes a new method to produce protein‐imprinted cryogel beads. The protein‐imprinted material was characterized and the separation properties were evaluated with regard to both the target protein and whole cells with target protein exposed on the cell surface. The maximum protein A adsorption was 18.1 mg/g of wet cryogel beads. The selectivity coefficient of protein A‐imprinted cryogel beads for protein A was 5.44 and 12.56 times greater than for the Fc fragment of IgG and protein G, respectively.     

利用手持技术数字化实验测定中和反应化学计量比*

化学计量比在中学教学及实际生产中有着重要应用,本研究针对化学计量比概念教学存在的不足,以手持技术TQVC概念认知模型为理论依据,设计实验测定中和反应的化学计量比。基于等摩尔连续变化法,本实验借助温度传感器测定不同物质的量之比反应物反应后的温度变化数据,找出最大温度变化差值对应的反应物物质的量之比,即化学计量比,帮助学生从定量的角度理解化学计量比概念。     

Properties of cat-eye modulating retro-reflector and its application with piezoelectric transducer

Piezoelectric cat-eye modulating retro-reflector (MRR) is the core component of an acousto-optic retro-identification system. The influence of the optical parameters (link distance l, lens focal length f and the detector diameter r) to the cat-eye effect was analyzed theoretically and experimentally. A piezoelectric cat-eye retro-identification (PCERI) system was built, and an information transmission ratio of 2 kHz was achieved which can satisfy an access control system.     

Advances towards Cell-Specific Gene Transfection: A Small-Molecule Approach Allows Order-of-Magnitude Selectivity

A transfection vector that can home in on tumors is reported. Whereas previous vectors that allow moderately cell selective gene transfection used larger systems, this small-molecule approach paved the way for precise structure-activity relationship optimization. For this, biotin, which mediates cell selectivity, was combined with the potent DNA-binding motif tetralysine-guanidinocarbonypyrrol via a hydrophilic linker, thus enabling SAR-based optimization. The new vector mediated biotin receptor (BR)-selective transfection of cell lines with different BR expression levels. Computer-based analyses of microscopy images revealed a preference of one order of magnitude for the BR-positive cell lines over the BR-negative controls.     

利用手持技术探究加热过程中石棉网上表面的温度

利用手持技术实时精确测量加热中石棉网上表面不同位置的温度，采用独立样本t检验比较石棉网上表面无铁丝点和有铁丝点间的温度差异与温差差异，通过回归分析探究石棉网上表面温度与其主要影响因素间的关系。研究表明：同等条件下加热中的石棉网上表面无铁丝点与有铁丝点存在显著温度差异，而无铁丝点间的单位距离温差与有铁丝点间的单位距离温差无显著差异；石棉网升温阶段上表面温度与时间、位置的关系可拟合为二元一次线性方程，恒温阶段上表面温度与位置的关系可拟合为一元三次曲线方程；石棉网上表面温度从中心向边缘小幅递减，均匀分布，最大温差小于玻璃仪器的耐热骤变温差。研究结果为化学教育实践中科学使用石棉网以及化学实验教材的编写提供参考依据。     

手持技术测定钙尔奇D片中的钙含量

利用二氧化碳传感器测定钙尔奇D片中的钙含量，解决二氧化碳含量不好直接测定的问题，帮助学生提升定量认识，同时体验多种数据记录与处理方式，感受信息技术的魅力。