Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

紫外预电离TEA CO2激光器放电特性的实验研究

 横向激励大气压（transversely excited atmospheric,TEA）CO₂激光器的放电稳定性是决定该类型激光器应用效果的关键因素。通过对采用电感充放电电路的紫外预电离激光器的实验研究，得到了激光器放电动态过程的规律，并发现残余振荡是主放电后发生弧光放电的主要原因。实验中采用不同配比的气体，并对电感充放电电路与改进后的硅堆充放电电路进行了比较。实验结果表明：增加充电电感值可以降低主放电结束后储能电容上的残余电压；而采用硅堆放电电路在主放电后仅有相对幅值很低的稳定残压，两种方案都大幅度抑制了弧光放电的形成，有效地提高了激光单脉冲能量。     

神光-Ⅱ装置三倍频实验中靶场单元技术的改进

 主要介绍为了满足神光-Ⅱ高功率激光装置三倍频光（351nm，3ω）的物理实验要求，靶场三倍频模拟光源和瞄准监视系统两个主要单元技术的改进，即三倍频模拟光源由基频光（1 053nm，3ω）通过腔外的KTP+BBO晶体倍频获得，再经八路分光系统和主激光耦合；瞄准监视系统由透射式光学系统改进为反射式光学系统，避免原系统存在较大的色差，提高瞄准精度。     

Reactions Occurring in Gels of Lithium Tetraalkyl Borates Promoted by Supermolecular Structure of Complexes

As Li[BOR'(OR)₃] and Li[B(OR)₄] complexes, where R’ and R are alkyls of iso- and normal structure, are formed from boron alkoxides and lithium in solutions of low dielectric permittivity, they are involved in autocatalytic polyassociation to give viscoelastic systems (gels) possessing a mechanical memory [1].     

Conventional processes and membrane technology for carbon dioxide removal from natural gas:A review

Membrane technology is becoming more important for CO 2 separation from natural gas in the new era due to its process simplicity,relative ease of operation and control,compact,and easy to scale up as compared with conventional processes.Conventional processes such as absorption and adsorption for CO 2 separation from natural gas are generally more energy demanding and costly for both operation and maintenance.Polymeric membranes are the current commercial membranes used for CO 2 separation from natural gas.However,polymeric membranes possess drawbacks such as low permeability and selectivity,plasticization at high temperatures,as well as insufficient thermal and chemical stability.The shortcomings of commercial polymeric membranes have motivated researchers to opt for other alternatives,especially inorganic membranes due to their higher thermal stability,good chemical resistance to solvents,high mechanical strength and long lifetime.Surface modifications can be utilized in inorganic membranes to further enhance the selectivity,permeability or catalytic activities of the membrane.This paper is to provide a comprehensive review on gas separation,comparing membrane technology with other conventional methods of recovering CO 2 from natural gas,challenges of current commercial polymeric membranes and inorganic membranes for CO 2 removal and membrane surface modification for improved selectivity.     

Off-Line and On-Line Preconcentration Techniques for the Determination of Phenylureas in Freshwaters

Abstract

Phenylurea herbicides are analysed by reversed-phase liquid chromatography using UV detection at 244 nm after a concentration step in order to determine ppb or sub-ppb levels in drinking and river waters. With an average UV detection limit of 5 ng, a 500 ml sample volume is necessary to reach the 10 ppt level for spiked LC grade water samples and enables easy determination of concentrations below the ppb level for river water samples. Off-line and on-line methods are compared for the concentration step. Off-line concentration consists in a liquid sorption on n-octadecyl silica (C18) and elution by a suitable organic solvent. Polar phenylureas have low retention volumes on C18 silica and consequently the length of the concentration column has to be 10 cm to concentrate them at the ppb level from 100 ml of water and longer for lower levels of detection. Nevertheless, we show that increasing the size of the concentration column does not improve the limits of detection because of the numerous interferences also concentrated when percolating high volumes of water. On-line technology can be used only with short precolumns and requires a sorbent with a great retention for phenylureas. The copolymer-based PRP-1 is found to be an excellent sorbent and it is then possible to apply on-line precolumn technology with preconcentration through two precolumns (10 × 21 mm ID) in series, the first one being packed with C18 silica and the other with the PRP-1 polymer. Interfering compounds are then trapped onto the first precolumn acting as a filter and common phenylurea-breakthrough volumes on the PRP-1 precolumn are higher than 500 ml. Knowing the amounts preconcentrated on both precolumns and using UV and electrochemical detection help the identification of phenylureas in river water.     

Radial sample load distribution under overload conditions: Analytical scale columns

The homogeneity of the sample load across the radial cross section of analytical scale columns was determined when operating under overload conditions. The study was performed using active flow technology columns operating in parallel segmentation mode. The outlet segmentation ratio was varied to enable different volume fractions of mobile phase, and thus sample, to elute from the peripheral and central flow regions of the column. The amount of solute exiting the peripheral and radial central exit ports was determined as a function of the flow segmentation ratio. The experimental data using an analytical scale column with dimensions, 100?×?4.6?mm, indicated that the sample load distribution was essentially uniform as a function of the column radial cross section.     

基于集成运放的太阳能控制器

现有光伏系统的控制器普遍选用微控制器为核心,为使之与电子技术课程教学案例开发相结合,提出采用集成运放替代微控制器的智能太阳能控制器方案,并以直流12V/10A小功率应用为研究实例。实验结果表明该控制器方案可行,且电路简单、成本低廉,适用于实验教学与课程设计。     

State of the art and research development prospects of energy and resource-efficient environmentally safe chemical process systems engineering

In this focus overview, the main types and directions of engineering, methods and techniques of intensification of chemical process systems (CPS) and process optimization of energy- and resource-efficient processes for the representative production of titanium compounds, mining waste processing systems, electrochemical coating technologies, combined technologies for the treatment of industrial effluents and energy-and resource-efficient technologies for cleaning soils from petroleum and chemical pollution products are reviewed. The following issues have been discussed: methods of complex assessment of production energy efficiency and software and information support for automated synthesis of optimal energy-efficient regenerative heat exchange systems using pinch analysis; methods and algorithms for fractal-statistical characteristics analysis of nonstationary gas flows in complex gas pipelines; methods of ecological and economic optimization of production, infrastructure supply chains; methods for assessing and preventing the dangerous environmental impact assessment of chemical pollution; organization and logistics management of business processes engineering for improving the energy efficiency of plants; engineering of problem oriented computer systems, heuristic-computational models and algorithms for intelligent integrated logistics support of the equipment life cycle; engineering developments in the field of digital transformation of energy-efficient CPS and technological production systems; application of methods for optimizing reliability factors optimization, digitalized risk and safety management in the engineering of energy- and resource efficient CPS.     

Preparation of Zn(Cd)O:Ga–SiO2 composite scintillating materials

Composite material consisting of highly luminescent Zn(Cd)O:Ga powder embedded in the silica matrix was prepared. It was found out that ZnO:Ga with less developed crystals (i.e. annealed at lower temperatures) is more prone to interact with the SiO₂ matrix and form zinc silicates, which in turn resulted in the decrease in the excitonic emission. Pre-annealing of the powders at temperatures above 600 °C prevented the interaction with the SiO₂ matrix. ZnO:Ga with well-developed crystals at such a high temperatures was not affected by the matrix and retained its properties, i.e. high radioluminescence intensity and ultrafast sub nanosecond photoluminescence decay. Introducing Cd into the ZnO lattice caused observable red shift in the excitonic luminescence, without negatively affecting the total intensity or the decay.