Photo-Induced Ultrafast Electron Dynamics in Anatase and Rutile TiO2: Effects of Electron-Phonon Interaction

The photo-induced ultrafast electron dynamics in both anatase and rutile TiO\begin{document}$_{2}$\end{document} are investigated by using the Boltzmann transport equation with the explicit incorporation of electron-phonon scattering rates. All structural parameters required for dynamic simulations are obtained from ab initio calculations. The results show that although the longitudinal optical modes significantly affect the electron energy relaxation dynamics in both phases due to strong Fr?hlich-type couplings, the detailed relaxation mechanisms have obvious differences. In the case of a single band, the energy relaxation time in anatase is 24.0 fs, twice longer than 11.8 fs in rutile. This discrepancy is explained by the different diffusion distributions over the electronic Bloch states and different scattering contributions from acoustic modes in the two phases. As for the multiple-band situation involving the lowest six conduction bands, the predicted overall relaxation times are about 47 fs and 57 fs in anatase and rutile, respectively, very different from the case of the single band. The slower relaxation in rutile is attributed to the existence of multiple rate-controlled steps during the dynamic process. The present findings may be helpful to control the electron dynamics for designing efficient TiO\begin{document}$_{2}$\end{document}-based devices.     

A review on key aspects of wet granulation process for continuous pharmaceutical manufacturing of solid dosage oral formulations

Wet granulation process is a major unit operation in production of pharmaceuticals as solid dosage oral formulation. Indeed, granulation is used to improve the formulation properties such as flowability, compressibility, and so on for pharmaceutical manufacturing. Different types of granulations can be used in pharmaceutical manufacturing in which the selection of proper process depends on the operational conditions as well as formulation properties. In current decades, twin-screw wet granulation has been of paramount interest owing to its superior properties. Pharmaceutical manufacturing industry are trying to move towards continuous mode by which the efficiency can be improved compared to the batch mode. Therefore, development of continuous granulation process is of great importance. In this review article, various processing units applicable for wet granulation of pharmaceutical formulations for solid dosage forms are reviewed and discussed. The advantages and disadvantages of the processes are discussed and listed along with modeling approaches for simulation of process. The governing models and numerical schemes applicable for design of wet granulation are also critically discussed. The main focus is on wet granulation as this method has attracted much attention in pharmaceutical processing.     

Ultrafast synthesis of near-infrared-emitting aqueous CdTe/CdS quantum dots with high fluorescence

The traditional aqueous route to synthesis CdTe/CdS Core/shell (c/s) quantum dots (QDs) via decomposition of Cd-thiol complexes is usually time consuming. Herein, an ultrafast and facile aqueous synthetic approach under atmospheric pressure for CdTe/CdS c/s QDs with emission from the green to the near-infrared window (535–820 nm) is reported. With purified CdTe core QDs diluted in solution of Cd-3-mercaptopropionic acid (MPA) complexes, CdTe/CdS c/s QDs with emission wavelengths at 700 and 800 nm can be obtained within 20- and 45-min refluxing under the optimized experimental conditions, respectively. This is the most rapid way to prepare CdTe/CdS c/s QDs in aqueous phase, and the obtained QDs were highly luminescent without postsynthesis treatment. The influences of various experimental factors, including Cd²⁺ concentration, MPA-to-Cd ratio, pH value, and dilution ratio on the growth rate and luminescent properties of the obtained CdTe/CdS c/s QDs, have been taken into consideration. The three processes “purification-dilution-addition” ensure the synthesis environment with high pH value and low core concentration and have a marked impact on the rapid synthesis rate and the resulting high fluorescence of CdTe/CdS c/s QDs.     

基于眼动追踪技术的高中生化学问题解决的差异性研究——以“氧化还原反应”为例

以氧化还原反应相关试题作为测试材料,采用眼动追踪技术对12名高一学生进行3(学业水平)*3(试题难度)两因素混合实验,实验结束后进行追述性口语报告。结果表明,在氧化还原反应问题解决过程中学优生信息加工速度快、深度浅、难度小,采用正向加工和逆向排除结合的策略。学中生信息加工速度慢、深度深、难度大,采用正向加工策略。学困生轻易放弃,信息加工无效。随着问题难度的增大,学生信息加工速度变慢、深度变深、难度变大。     

利用手持技术探究铁的电化学腐蚀实验*

借助手持技术,利用电压传感器和pH传感器测定不同酸碱性环境下金属铁发生电化学腐蚀的模拟原电池电压变化情况,探究金属铁发生析氢腐蚀和吸氧腐蚀对应的pH范围,帮助学生深入理解铁的电化学腐蚀原理,感受化学定量实验的魅力。     

物理化学教学中安全工程教育的融合与内化实例*

如何强化安全工程教育是化学化工类专业高等教育的一个重要课题。通过对蒸汽锅炉爆炸、火灾爆燃事故以及锈蚀危害等3个实例的详细讲述,指出在物理化学的教学中,若适时融入相关的安全工程教育,可以使学生深刻理解安全事故发生及防范所依赖的物理化学原理,从而起到安全意识的内化作用。教学中现代教育技术的引入可以增强这一效果。     

原位合成H2O2在水处理技术中的应用研究进展

从过氧化氢(H₂O₂)的原位生成技术角度总结了近年来利用原位合成H₂O₂处理水中污染物的研究,分析了当前可充当氢源材料的种类及不同的氢源材料对于提高H₂O₂产率的影响,以及不同的催化剂材料和催化反应环境提高H₂O₂利用率对污染处理效果的影响因素,并对原位合成H₂O₂在水处理领域中面临的挑战和发展前景做了展望,从而为该技术的大规模应用提供指导和借鉴。     

飞行试验大数据技术及展望

现代航空武器装备综合化和信息化程度越来越高,飞行试验测试数据的种类增多,测试数据量剧增,飞行试验进入了大数据时代。试飞大数据的来临,对试验数据的获取、记录、传输和处理等传统技术及模式产生了强大的冲击,也提出了严峻的挑战。本文在简要介绍大数据概念及国外研究应用现状的基础上,通过总结分析飞行试验数据的新特征、新需求,提出了“试飞大数据”的概念,得出飞行试验数据是典型大数据的结论;按照试飞测试流程和大数据技术范畴,重点分析了试飞大数据技术中的数据获取、交换、记录、传输、监控、处理、存储等关键技术,最后,对试飞大数据技术的应用前景进行了展望。     

冗余技术提高PLC控制系统可靠性的研究

针对工业现场对PLC控制系统可靠性提出更高的要求,提出利用冗余技术提高其可靠性。分析了硬件冗余和软件冗余在PLC控制系统中的应用,详细阐述了PLC控制器、输入输出口、通讯网络和电源各自的冗余方法,并着重以西门子300/400系列PLC为例进行了软硬件冗余的架构和原理分析。最后对冗余控制系统的可靠性进行分析,结果表明,使用冗余技术可使PLC控制系统的可靠性得到明显提高。     

基于AltiVec技术的PowerPC处理器矢量运算性能测试

基于AltiVec技术的PowerPC处理器,在很多嵌入式信号处理领域已经取代传统的DSP处理器成为信号处理器件的首选。为了评估基于AltiVec技术的PowerPC处理器的矢量运算性能和信号处理能力,选取MPC8641D处理器为硬件测试平台,采用符合VSIPL标准的VSI/Pro Core矢量库和ixlibsav矢量库,通过测试复乘和FFT典型算法不同类型的运算时间,对AltiVec处理单元的矢量运算性能进行了测试评估。通过对测试结果的分析,基于AltiVec技术的PowerPC处理器具备强大的矢量运算处理性能,可以满足嵌入式数字信号处理技术对高性能处理器的需求。