基于光纤锥级联结构的湿度传感器

提出了一种基于普通单模光纤粗锥级联结构的马赫-曾德尔干涉湿度传感器.将两根单模光纤对芯熔融成一个粗锥,并依次级联,形成光纤锥-单模光纤-光纤锥-单模光纤-光纤锥结构.外界环境湿度、温度的改变使传感器的纤芯基模和包层模的光程差发生改变,引起传感器干涉光谱发生变化.通过监测干涉谱波长和能量的变化实现对外界物理量的测量.实验结果表明,当空气中湿度在35~95%RH范围内变化时,传感器的湿度灵敏度为-0.065dB/%RH,线性度为0.997;当温度在30~80℃范围内变化时传感器的温度灵敏度为69.4pm/℃,线性度为0.998.该传感器可以避免温湿度的交叉影响,实现单参量的同时在线区分测量.     

鲁棒PDF控制策略在永磁同步电机系统中的设计及仿真

对电机控制系统的经典反馈设计方案是建立在简化的受控对象模型基础之上,而实际模型参数的变化会引起控制系统性能的改变。本文针对实际应用的永磁同步电机,为了保证电机控制系统的强鲁棒性,通过对其系统灵敏度的理论推导,给出了一种新的控制器参数设计方法。该设计方法以系统灵敏度为评价指标来度量系统的鲁棒性,结合应用于二阶控制对象的伪微分反馈控制器结构,来削弱控制对象参数值的改变对控制系统性能的影响。并建立了精确的永磁同步电机仿真模型,将该方法应用于其速度控制。仿真结果表明在该控制方案下,在永磁同步电机的转动惯量和定子电阻值变化时具有较小超调量变化(小于4%)的响应特性。同时与普通PID控制对比分析,验证了用该方案设计的PMSM调速系统具有较高的抗参数变化的鲁棒性。     

Gradient- and Sensitivity-Enhanced TOCSY Experiments

A pulsed field gradient version of the sensitivity-enhanced 2D TOCSY experiment is proposed which yields high-quality spectra with improved sensitivity and a minimum of two scans pert₁increment. For rapid acquisition of 1D TOCSY spectra, the 1D DPFGSE–TOCSY experiment was modified to include phase-encoded multiple-selective excitation followed by a simple spectral editing. Combination of these two building blocks is used in a sensitivity-enhanced 2D analog of the 3D TOCSY–TOCSY experiment which provides an efficient tool for resolving severely overlapped signals of oligomers in short experimental time.     

Correction for Shift-variant Characteristics of Single Photon Emission Computed Tomography Acquisition System Using Sensitivity Functions

The single photon emission computed tomography (SPECT) imaging system has shift-variant characteristics due to non-uniform attenuation of gamma-ray, collimator design, scattered photons, etc. In order to provide quantitatively accurate SPECT images, these characteristics should be compensated in the reconstruction. This paper presents a new method to correct the shift-variant characteristics, which is based on a continuous-discrete mapping model and filtered backprojection (FBP) method, in which the projection data are assumed to be acquired by narrow ray sum beams in the FBP method and the assumed data set is expressed as a linear combination of the actual projection data. Narrow ray sum beams are approximated by a weighted sum of the original sensitivity functions. Thus, at the reconstruction the projection data are first modified using an approximation and the FBP method is then applied to the corrected projection data and a SPECT image is reconstructed. We further propose a technique that requires the inversion of smaller matrices than the conventional algebraic method; the amount of calculation and memory space become smaller and the stability of the calculation is greatly improved as well. The results of the numerical simulations are also demonstrated.     

猛炸药RHT-901和钝感炸药IHE-2的爆轰波直角绕射

 采用高速转镜分幅相机和电探针技术研究了猛炸药RHT-901和钝感炸药IHE-2的爆轰波直角绕射图像和不同位置上的爆轰波传播时间。从研究得出，两种炸药都在拐角顶点附近绕射，爆轰波传播时间增长，爆速变小。但是两种炸药绕射爆轰波的状态不一样，钝感炸药IHE-2中爆轰波绕过直角时，在拐角顶点附近约10 mm范围内炸药未完全反应，猛炸药RHT-901中爆轰波绕过直角时未出现类似现象。两者相比，钝感炸药中绕射爆轰波速度变化大，波阵面曲率半径小，而猛炸药的绕射爆轰波速度变化小，波阵面曲率半径大。这说明炸药的爆轰波绕射与炸药的冲击感度、反应区宽度有关。     

Radiative Transport in a Periodic Structure

We derive radiative transport equations for solutions of a Schrödinger equation in a periodic structure with small random inhomogeneities. We use systematically the Wigner transform and the Bloch wave expansion. The streaming part of the radiative transport equations is determined entirely by the Bloch spectrum, and the scattering part by the random fluctuations.     

三代微光像增强器GaAs负电子亲合势（NEA）光电阴极稳定性研究

针对三代管ＧａＡｓ阴极灵敏度下降问题,开展工艺过程质量研究,分析影响因素并经工艺改进解决阴极不稳定问题     

碳纳米管/聚二甲基硅氧烷复合薄膜的制备及力敏特性研究

针对传感器的敏感单元发展需求,提出了一种碳纳米管复合材料.该材料是以碳纳米管作为填充粒子,结合聚二甲基硅氧烷(PDMS)有机基体,采用超声共混方法制备的一种新型传感器敏感元件.详细分析研究了复合材料的制备工艺参数,以及在不同工艺参数下该复合材料的力敏特性.扫描电镜测试表明碳纳米管在PDMS中分散均匀且镶嵌良好.通过对不同体积分数的碳纳米管与PDMS复合材料进行电学性能测试,研究薄膜的"力-电阻"和"力-电容"耦合性能,测试了薄膜结构的力敏效应.计算得到复合薄膜材料的压阻灵敏度因子达到40,压电容灵敏度因子达到70.实验研究表明,通过改变碳纳米管与PDMS的比例,可以很好地调节其电子输运特性以及电阻和电容的应力敏感特性,可以为该类型的力敏材料在不同的力敏传感技术领域提供新的研究思路.     

一种基于运算放大器的高灵敏度惠斯通电桥

关于如何提升惠斯通电桥灵敏度一直是惠斯通电桥研究的热门话题.运算放大器组装成为的差分放大电路在一定范围内可以线性放大输入电压.但是,使用运算放大器提高电桥灵敏度的方法并未被采用.本文采用LM358N型运算放大器来提高电桥两端电势差的测量精度,从而提升惠斯通电桥的灵敏度.我们使用Multisim软件对该方案进行仿真,结果表明如果将放大倍数调至20倍,那么实际误差将小于2%.经过对改进电桥进行实际测量,实验和理论结论符合得很好.采用此方法可以得到一个易操作、低成本、高灵敏度的惠斯通电桥.     

Sensitivity improvement of aluminum-based far-ultraviolet nearly guided-wave surface plasmon resonance sensor

An aluminum (Al) based nearly guided-wave surface plasmon resonance (NGWSPR) sensor is investigated in the far-ultraviolet (FUV) region. By simultaneously optimizing the thickness of Al and dielectric films, the sensitivity of the optimized Al-based FUV-NGWSPR sensor increases from 183°/RIU to 309°/RIU, and its figure of merit rises from 26.47 RIU^-1 to 32.59 RIU^-1 when the refractive index of dielectric increases from 2 to 5. Compared with a traditional FUV-SPR sensor without dielectric, the optimized FUV-NGWSPR sensor can realize simultaneous improvement of sensitivity and figure of merit. In addition, the FUV-NGWSPR sensor with realistic materials (diamond, Ta₂O₅, and GaN) is also investigated, and 137.84%, 52.70%, and 41.89% sensitivity improvements are achieved respectively. This work proposes a method for performance improvement of FUV-SPR sensors by exciting nearly guided-wave, and could be helpful for the high-performance SPR sensor in the short-wavelength region.