A comprehensive review on surface modification,structure interface and bonding mechanism of plant cellulose fiber reinforced polymer based composites

Abstract

Plant cellulose fiber polymer composites are readily applied in wide range of applications due to ecological and economical alternative to traditional materials. The considerable amount of residues and organic wastes from agricultural process are still employed as lower energy resource. Organic materials are generally disposed in composting, landfilling or anaerobic digestion. The utilization of these wastes in plant fiber composites shows significant alternative and environmental friendly in nature. The production of plant cellulose fiber composite with higher structural properties is optimized by interfacial bonding between polymer and reinforced fiber. The interface plays a vital role in regulating mechanical properties by distributing bonds and stress transferring, which is one of least understood element of composites. This paper presents the comprehensive review of fiber structures, different modification techniques to reduce the incompatibility between matrix and fiber, assessment of structure interface and bonding, clarifies the interfacial adhesion of cellulose fiber composites.     

白术煎剂表面增强拉曼光谱分析

测试分析了白术煎剂及其在银胶中的拉曼光谱,并对其进行初步谱峰归属。白术煎剂表面增强拉曼光谱在396,548,617,730,955和1 327 cm-1处,出现6个明显的拉曼信号。测试了白术煎剂和白术煎剂-银胶混合体系的紫外-可见吸收光谱,该吸收光谱在长波区出现新共振吸收峰(999 nm处),进而研究了白术煎剂在银溶胶上的吸附特性及其表面增强机理。结果表明,表面增强拉曼光谱可能为白术煎剂或其他中药煎剂提供一种准确、直接、快速的检测方法。     

利用井中偶极弯曲波反演渗透率的影响因素及灵敏度分析

本文以各向同性饱和流体孔隙介质充液井孔中声场传播理论为基础,系统考察了影响偶极弯曲波特征的主要因素,分析了快慢地层条件下弯曲波衰减和速度对不同参数的敏感度,对比结果表明,弯曲波的速度基本不受地层渗透率的影响,其衰减对渗透率的敏感性要远高于速度。弯曲波中心频率会随着波的衰减而发生偏移,说明利用弯曲波衰减和频移特征联合反演地层渗透率是可行的。通过对比快慢地层下的弯曲波衰减和速度灵敏度曲线,发现在慢速地层中反演渗透率的结果要好于快速地层。同时,本文也指出在低孔低渗储层中,还可以考虑利用弯曲波衰减识别气层。     

双面金属包覆介质波导模序数的判别方法

在双面金属包覆介质波导中 ,随着介质层厚度的变化 ,会出现TM0 模与TM1 模的分离和简并两种状态 ,从而影响衰减全反射 (ATR)谱中模序数的确认。通过对金属波导的理论分析和实验研究 ,提出了三种模序数确认方法 :本征角计算法、吸收峰全峰半宽比较法和吸收峰峰间距比较法 ,实现了两种状态下对模序数的准确判断     

高能强子在铁中的衰减

利用强子探测效率高的厚型甘巴拉山铁乳胶室,观测了能量大于4TeV强子流的衰减长度.分别对无伴随的单个强子、ΣE_γ>500TeV、100TeV≤ΣE_γ≤500TeV和30TeV≤ΣE_γ<100TeV的族事例中的强子作了测量. 初步结果表明,四种情况的衰减长度是有差异的,对此作了讨论.     

基于1–10GHz空地链路信号的雨强监测方法可行性研究

空地链路上的微波信号受降雨影响, 会产生功率衰减和去极化效应. 基于这些物理特性, 本文提出利用1–10 GHz空地链路信号的降雨干扰项获取雨强的方法, 并开展了相关理论研究. 根据空地链路信号与雨滴复杂的相互作用, 研究了空地链路信号频率为1–10 GHz时, 雨强 (rain rate, R) 对衰减 (attenuation, A) 和交叉极化分辨率 (cross-polarization discrimination, XPD)的影响, 分别建立了A-R和XPD-R关系模型. 通过数值模拟, 分别分析了利用上述两个关系模型估测雨强的可行性, 并系统研究了不同频率、极化方式和仰角条件下的适用性. 研究结果表明, 对于水平极化或圆极化, 且频率较高的空地链路信号, 利用A-R关系反演强降雨具有理论上的可行性; 对于不同频率和极化方式的信号, XPD-R关系模型都可以用于反演雨强, 并且对于1–50 mm·h^-1范围内的雨强, XPD较为敏感; 不同仰角条件下, A-R和XPD-R 模型都适用. 在4–10 GHz时, 本文的XPD-R模型和国际电信联盟ITU-R中XPD预测模型的结果非常接近. 所得出的结论对于下一步开展相关的验证实验, 拓展卫星系统的气象应用, 实时估测降雨强度, 实现全球降雨观测具有重要的参考价值. 关键词： 空地链路信号 雨强 衰减特性 交叉极化分辨率(XPD)     

Attenuation properties of EM wave by magnetized nonuniform plasma slab coated on perfect conductor plane

The total amplitude reflection coefficient of EM wave in a nonuniform plasma slab coated on perfect conductor plane is newly derived by using the scattering matrix method (SMM), and the attenuation is calculated. Three types of plasma electron density profile, that is the hyperbolic, sinusoidal, and linear profiles, are used. The external magnetic field and plasma parameters such as the maximum electron density and collision frequencies are discussed to calculate the attenuation of EM wave. The calculation results show that the plasma electron density profile and maximum electron density exert a large effect to the attenuation of EM wave and the attenuation under the uniform external magnetic field is taken place by the electron cyclotron resonance absorption, the up hybrid resonance absorption and geometric resonances absorption.     

White and some colored marbles as alternative radiation shielding materials for applications

ABSTRACT

In this paper, the radiation shielding parameters such as linear attenuation coefficients (LAC, µ), mass attenuation coefficients (MAC, µ/ρ), effective atomic numbers (Z_eff), effective electron densities (N_eff), half value of layers (HVL), mean free paths (MFP) and buildup factors (exposure (EBF) and energy absorption (EABF)) were investigated for cream (M1), pink (M2), white (M3), maroon (M4) and green (M5) marbles. Attenuation coefficients were measured in the energy region 31.18–661.66 keV photon energies. The values of Z_eff and N_eff were then calculated using these coefficients with logarithmic interpolation method, and HVLs and MFPs were calculated using the values of LAC of marble samples at the same photon energies. The experimental results were compared with the theoretical values obtained from WinXCom program, and good agreements were observed between the experimental and theoretical results. HVLs and MFPs of all marble samples were compared with those of some concretes, glasses and commercial radiation shielding glasses (SCHOTT Co.). The studied marbles were better radiation shielding materials than standard shielding concretes due to lower HVL and MFP values lower than the ordinary concrete. Finally, EBFs and EABFs of the marbles were calculated in the energy region 0.015–1?MeV up to penetration depths of 40 mfps by Geometric Progression method (G-P), and the results were discussed in terms of photon energies and chemical compositions of the marbles.     

Analytical formulas for calculating photoelectric attenuation coefficients

Photoelectric absorption is an interaction in which an incoming gamma ray virtually transfers all of its energy to an atomic electron, usually the most tightly bound K-shell electron of an atom. This paper uses the Win XCOM computer code as a reference base. We found analytical photoelectric attenuation coefficients for researchers using the Monte Carlo simulation program for Z∈ [1; 100] and E∈[10 keV; 3 MeV]. We define a photoelectric effect operator and coefficient operators and a series for photoelectric absorption. We have calculated two polynomial coefficient operators for use with XCOM for photoelectric absorption. We determined 14 energies and atomic number limits for elements, and we find that they are accurate limits of photoelectric absorption for fitting with XCOM.     

不同物料堆肥腐熟程度的紫外-可见光谱特性表征

水溶性有机物(DOM)紫外-可见吸收光谱特性是评价堆肥腐熟度重要方法之一,但由于紫外-可见吸收光谱指标众多,单指标评价具有较大局限性。因此,本研究开展了影响堆肥腐熟度的关键紫外-可见光谱特性指标识别,并采用化学剂量学方法评价了不同来源堆肥腐熟程度。与传统单一物料评价相比,优选的评价指标及评价方法更具普适性。不同物料堆肥过程中DOM紫外-可见光谱特性分析结果表明,SUVA₂₅₄和SUVA₂₈₀值呈明显的增加趋势,E₂₅₀/E₃₆₅和E₄/E₆值呈相反的趋势,而A_226～400,S_275～295,S_350～400值则在堆肥末期变化显著。相关分析表明不同紫外-可见光谱参数(E₂/E₄和E₂₃₅/E₂₀₃除外)彼此之间相关性显著;主成分分析显示,DOM紫外-可见光谱指标A_226～400, SUVA₂₅₄, S_350～400, SUVA₂₈₀, S_275～295可作为堆肥腐熟程度关键影响评价指标。在此基础上,采用筛选的特性指标对堆肥末期进行聚类分析,可将九种不同来源堆肥分为两大类,第一类为猪粪、鸡粪、污泥、秸秆、园林垃圾、果蔬及生活垃圾等腐熟程度较低的堆肥;第二类为杂草和厨余腐熟程度较高的堆肥。