Quantitative determination of UV filters in sunscreen lotions using microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) has been applied to the separation of some UV filters (Eusolex 4360, Eusolex 6300, Eusolex OCR, Eusolex 2292, Eusolex 6007, Eusolex 9020, Eusolex HMS, Eusolex OS, and Eusolex 232) commonly used in sunscreen lotions. Use of a MEEKC buffer with a mixed surfactant system to stabilize the oil droplets and an organic modifier in the aqueous phase allowed separation of most of the selected analytes in a single run in a system fitted with a diode array detector recording three wavelengths (240 nm, 300 nm, and 380 nm) simultaneously. The microemulsion employed consisted of 2.25 g of SDS, 0.75 g of Brij 35, 6.6 g 1‐butanol, 0.8 g n‐octane, 17.5 g 2‐propanol, and 72.1 g of 10 mM borate buffer (pH 9.2). Detection limits from 0.65 to 6.0 μg/mL were obtained and the calibration plots were linear over at least one order of magnitude for all analytes. The developed method could be applied to the determination of UV filters in several sun protection products including lotions, milks, and oils. Comparison of the obtained data with those from an HPLC method described in the literature showed acceptable agreement.     

Bestimmung von Melment in Zementmischungen durch UV-Spektralphotometrie

Ohne Zusammenfassung

---

Determination of melment in cement mixtures by UV-spectrophotometry

     

High-Resolution,Higher-Order UV/VIS Derivative Spectrophotometry

Derivative spectrophotometry has gained increasing importance in the past two years and is currently experiencing vigorous development. Following and introduction the present article provides a review of this extremely effective method. In particular, the advantages of higher-order derivative spectrophotometry (HODS method, n > 2) are discussed on the basis of practical examples from a wide range of analytical fields. The results are achieved with the aid of a newly developed analog computer unit, whereby for the first time readily reproducible, low-noise, on-line spectra can be obtained up to the 7th order and even, in favorable cases, up to the 9th order. In practice it has proved valuable to work with spectra of the 3rd to 5th order; but even higher derivations could be profitable for the separation of strongly superposed signals or for “fingerprinting”.     

一种新型的表面声波阻抗传感器及其在液相体系中的应用

一种新型的表面声波阻抗传感器及其在液相体系中的应用姚守拙，陈康，刘德忠，聂利华（湖南大学化学化工系，长沙，４１００８２）关键词表面声波，阻抗传感器，液相应用表面声波传感器（ＳＡＷＳ）具有较高的灵敏度和检测精度，已广泛应用于气体微量组分分析、色谱检测和...     

Polymeric pH indicators immobilized PVA membranes for optical sensors of high basicity based on a kinetic process

Two kinds of polymeric pH indicators PPF (phenolphthalein-formaldehyde product) and CPF (o-cresolphthalein-formaldehyde product) immobilized cross-linked poly(vinyl alcohol) membranes (PPF-PVA and CPF-PVA) for optical intermittent determination of high basicity ([OH⁻] = 1-8 M) based on a kinetic process were developed. In our previous work, we had demonstrated that PPF-PVA and CPF-PVA could perform the determination of high pH values from pH 10.0 to 14.0. Here the discoloring kinetic behaviors of PPF-PVA and CPF-PVA were compared with those of free phenolphthalein, o-cresolphthalein and thymolphthalein. Experimental results and theoretical analysis indicated that the response behaviors of the optodes’ membranes in concentrated NaOH solutions were diffusion-independent and still complied with the pseudo-first-order kinetics. In addition, two data analysis methods for determination were presented. One was directly based on the reduced absorbance; the other was based on the discoloring kinetic constant. It was found that the latter could perform a rapid (60 s) and reliable (relative standard deviation: 2.6%) determination for high basicity. These kinds of optodes can be used repeatedly when they are immersed in low-pH solutions to regain the protonated form after each determination.     

Synthesis of metal/polymer nanocomposite by UV-radiation curing

Nanocomposite polymers containing bismuth nanoparticles (2 wt%) have been obtained by photopolymerization of acrylic resins. The bismuth nanoparticles have been synthesized by reduction of BiCl₃ with t-BuONa activated sodium hydride. In situ t-BuONa stabilization protects the metallic particles against aggregation. Transmission electron microscopy (TEM) analysis has shown that the bismuth nanoparticles are well dispersed in the acrylic resin. The curing process was followed quantitatively by infrared spectroscopy through the decrease upon UV exposure of the IR bands characteristic of the functional groups. The bismuth nanoparticles were found to have no detrimental effect on the photopolymerization kinetics. Dynamic mechanical analysis (DMA) has shown that the viscoelastic properties of the nanocomposite photopolymer are significantly modified in comparison with corresponding UV-cured polymer. The addition of metal nanoparticles was found to greatly reduce the gloss of UV-cured coatings.     

Sequential injection analysis for benzophenone-4 and phenylbenzimidazole sulphonic acid in sunscreen sprays by solid-phase extraction coupled with ultraviolet spectrometry

A sequential injection UV method was developed to determine benzophenone-4 (BZ4) and phenylbenzimidazole sulphonic acid (PBS) simultaneously, these being the most commonly used UV-filters in aqueous formulations used as sunscreen sprays. The selective elution of both was performed by on-line solid-phase extraction, by retention on a SAX microcolumn and separation by varying the pH of elution. The sensitivity obtained was 0.042±0.001 ml μg⁻¹ for PBS and 0.0159±0.0003 ml μg⁻¹ for BZ4. The limit of detection was 1.6 μg ml⁻¹ for PBS and 0.6 μg ml⁻¹ for BZ4. The R.S.D. of the results was 1-6% for PBS and 1-12% for BZ4. The method was validated using commercial sunscreen formulations with concentrations determined by a liquid chromatographic procedure. The two procedures gave comparable results. Automation of the method means the amount of reagents used and residues generated are decreased. The system allows the required analysis sequence to be programmed using suitable software.     

A New Complex of Europium(II) with edta – Structure and Spectroscopy

A new complex of europium(II) with ethylenediaminetetraacetic acid was obtained by electrochemical reduction. The compound is composed of polymeric chains, guanidinium cations and water molecules. The Eu²⁺ cation is eight‐coordinate (two nitrogen atoms and six carboxylate oxygen atoms), and contrary to europium(III) complexes with edta, does not contain water molecules in the first coordination sphere. Relationships between the coordination mode and IR as well as UV–Vis spectra are discussed.     

Sol-Gel Synthesis of Humidity-Sensitive P2O5-SiO2 Amorphous Films

The sol-gel synthesis of silicophosphate gels using phosphoryl chloride and tetraethoxysilane as molecular precursors is reported and discussed. Gel-derived glasses and films having the molar compositions 10P₂O₅ · 90SiO₂ and 30P₂O₅ · 70SiO₂ have been obtained. The structure of the dried gels as well as the structural modifications that occurs during the transformations in gel-derived glasses are analyzed by Fourier transform infrared spectroscopy (FTIR). It has been found that the evidence of the P—O—Si linkages begins to appear only on the FTIR spectra of the bulk gels heat treated up to 400°C while they are well resolved on the FTIR spectra of the bulk gel samples heated up to 1000°C indicating that at this temperature the transformation in the corresponding gel-derived glasses occurs. The humidity sensitive properties of the gel-films have been evaluated by electrochemical impedance spectroscopy (EIS). The phosphorous content as well as the temperature of the heat treatments strongly affect the sensitivity to RH of the gel-derived films.     

Disposable multichannel immunosensors for 2,4-dichlorophenoxyacetic acid using acetylcholinesterase as an enzyme label

An improved version of the disposable multichannel immunochemical biosensor for the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) based on a screen-printed amperometric transducer and monoclonal antibodies (MAb) against 2,4-D is reported. Entrapment within a thin Nafion film was used for the direct immobilization of MAb at the electrode surface. The amount of the tracer (2,4-D conjugated to acetylcholinesterase) bound in a competitive immunochemical reaction was determined amperometrically using acetylthiocholine iodide as substrate. The measuring procedure (times of incubation with tracer and substrate, pH, tracer concentration) was optimized. The sensor was able to detect less than 0.01 μg/L of free 2,4-D in water. One analysis (8 samples) was completed in 30 min (20 min for immunochemical reaction, 5 min incubation with substrate, 5 min measurement). The performance of the immunosensor (two configurations) was evaluated on real samples (tap water) with added 2,4-D. The determined amounts (mean values 0.097 to 0.105 and 0.89 to 1.13) corresponded well with the added contents of 2,4-D (0.100 and 1.00 μg/L, respectively).