Synthesis and characterization of poly(ethylene oxide‐co‐ethylene carbonate) macromonomers and their use in the preparation of crosslinked polymer electrolytes

Methacrylate‐functionalized poly(ethylene oxide‐co‐ethylene carbonate) macromonomers were prepared in two steps by the anionic ring‐opening polymerization of ethylene carbonate at 180 °C, with potassium methoxide as the initiator, followed by the reaction of the terminal hydroxyl groups of the polymers with methacryloyl chloride. The molecular weight of the polymer went through a maximum after approximately 45 min of polymerization, and the content of ethylene carbonate units in the polymer decreased with the reaction time. A polymer having a number‐average molecular weight of 2650 g mol^?1 and an ethylene carbonate content of 28 mol % was selected and used to prepare a macromonomer, which was subsequently polymerized by UV irradiation in the presence of different concentrations of lithium bis(trifluoromethanesulfonyl)imide salt. The resulting self‐supportive crosslinked polymer electrolyte membranes reached ionic conductivities of 6.3 × 10^?6 S cm^?1 at 20 °C. The coordination of the lithium ions by both the ether and carbonate oxygens in the polymer structure was indicated by Fourier transform infrared spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2195–2205, 2006     

Thermochemically induced binding of methyl orange to polycations containing primary amine groups

The thermochemical transformation of electrostatically formed complexes of methyl orange (MO) with polycations containing primary amine groups such as ammonium salts afforded new polymers with a high concentration of covalently bound 4‐N,N‐dimethylaminoazobenzene groups in the side chain. Poly(allylamine hydrochloride) and poly(β‐aminoethylene acrylamide hydrochloride) were employed as support polycations for MO. The transformation of sulfonate–ammonium ion pairs into sulfonamide bonds, via heating at an elevated temperature, was supported by the polymer properties before and after the thermal treatment. The polymer structure changes were monitored with elemental analysis, Fourier transform infrared, ¹H NMR, and ultraviolet–visible absorption spectroscopy, and thermogravimetric analysis. The spacer length between the backbone and azobenzene structures used as side chains strongly influenced the polymer properties before and after the heat‐induced reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5898–5908, 2006     

红外光谱法研究含CeSt3的LDPE膜紫外光氧降解

报道了硬脂酸铈（ＣｅＳｔ_３）、及其在各种浓度、或不同温度、或延长贮放时间下含ＣｅＳｔ_３的低密度聚乙烯（ＬＤＰＥ）膜紫外光氧化降解过程的红外光谱。结果表明，只要在ＬＤＰＥ膜中加入０．１ｗｔ＋％～０．３ｗｔ＋％ＣｅＳｔ_３光敏剂，即可控光降解ＬＤＰＥ膜的寿命。     

钢卷尺刻度在线测量系

本文介绍了一种钢卷尺刻度在线测量系统 ,它采用了高速摄像及计算机数据处理技术 ,文章阐述了系统的非接触动态测量原理 ,描述了光电信号的处理方法 .     

低密度聚乙烯光引发交联机理——Ⅱ.BNB自旋捕捉ESR研究

在光引发剂二苯甲酮(BP)存在下,紫外光辐照低密度聚乙烯(LDPE)所形成的自由基中间体已被自旋捕捉剂2,4,6-三特丁基亚硝基苯(BNB)所捕捉,其自旋加合物自由基已为电子自旋共振(ESR)所特征。现已检测和鉴定到二种自旋加合物:一种是叔碳自由基;另一种是仲碳自由基。它们分别是由BP的激发三重态从LDPE链的支化点和亚甲基团上夺氢所形成的自由基中间体同自旋捕捉剂BNB反应生成的。上述的证据表明:LDPE的光引发交联点主要发生在叔碳和仲碳原子上,且H-型交联点占主导地位。     

羧基苯偶氮基杯[6]芳烃衍生物的合成及表征

近几年,随着对主客体化学研究的深入,杯芳烃的功能化修饰成为该领域的研究热点[1-6]。本文以邻、间、对氨基苯甲酸和杯[6]芳烃为原料,经重氮化 偶联反应合成了新型有色邻、间、对羧基苯偶氮基杯[6]芳烃,产物的结构经IR,1HNMR和元素分析表征;并研究了它们生色原理和光谱性能。结果表明它们是一类新型指示剂和具有新型配位空腔的主体分子。合成路线如下:图1　邻、间、对羧基苯偶氮基杯[6]芳烃的合成Fig.1　Fig1:Synthesisofp (o,m,p carboxylbenzeneazo)calix[6]arenes1　实验部分1 1　仪器与试剂Nicolet 460型傅里叶红外光谱仪(KBr…     

Synthesis, spectroscopic and thermal studies of the copper(II) aspartame chloride complex

Aspartame adduct of copper(II) chloride Cu(Asp)₂Cl₂·2H₂O (Asp=aspartame) is synthesized and characterized by elemental analysis, FT IR, UV/vis, ESR spectroscopies, TG, DTG, DTA measurements and molecular mechanics calculations. Aqueous solution of the green solid absorbs strongly at 774 and 367 nm. According to the FT IR spectra, the aspartame moiety coordinates to the copper(II) ion via its carboxylate ends, whereas the ammonium terminal groups give rise to hydrogen bonding network with the water, the chloride ions or neighboring carboxylate groups. The results suggest tetragonally distorted octahedral environment of the copper ions.     

冠醚化二苯甲酮的合成及其光物理行为

本文报道采用在多聚磷酸中酰化的方法,合成了冠醚化二苯甲酮1～8。它们与叔胺类共用可能被用作光引发剂。为此,用紫外光谱详细研究了这些化合物及其络合后的光物理行为。还提及化合物3和4作为紫外吸收剂的可能性。     

足球分子及有关碳笼的电子结构

本文评述了激光气化产生的碳原子簇的电子结构和活性。足球分子具有球面芳香性。我们用INDO/2和INDO/CI系列方法。研究了足球分子及其异构体的电子结构和UV谱。足球分子的计算结果是只有一条低频带(366.4nm),与实验结果(386.0nm)符合得很好。     

Decomposition of 1-(ω-aminoalkanoyl)guanidines under alkaline conditions

The decomposition of some N^G-(ω-aminoalkanoyl)argininamides, which are key intermediates for the preparation of radiolabeled and fluorescent neuropeptide Y receptor ligands, prompted us to synthesize a small series of simple 1-(ω-aminoalkanoyl)guanidines, and to investigate these model compounds for stability in alkaline buffers. The degradation of acylguanidines was monitored by time resolved UV spectroscopy. The most labile compound, 1-(5-aminopentanoyl)guanidine, decomposed with a half life of 19 s to yield piperidin-2-one (pH 10.4 at 25 °C). In contrast the half life of 1-(6-aminohexanoyl)guanidine is 7.7 h, which is comparable to the hydrolysis of acetylguanidine (t_1/2 = 9.6 h) in alkaline solution.