正交异性复合材料储液容器入水过程数值分析

采用多物质ALE流固耦合算法,对柔性储液容器的入水问题进行了仿真研究。该方法可以方便地考虑多种流体同时与结构耦合。首先,通过模拟平板恒速入水试验,验证了该方法的有效性,并确定了空气的影响。进而,仿真分析了复合材料柔性容器入水时的动态响应行为,结果表明,底部"空气垫"及容器内空气对冲击载荷具有一定的缓冲作用,容器底部形状、储液量等因素也具有较大影响。仿真得到的响应规律为容器的优化设计提供了重要的理论参考。     

ITER 极向场磁体支撑U 型韧性夹焊接方案优化

利用试验及数值模拟技术研究了ITER 极向场磁体支撑U 型韧性夹的焊接变形规律,模拟和实际测量的比较验证了模拟的准确性,从而得到了U 型夹焊缝变形的基本规律,并改进现有夹具类型。基于验证好的热力边界条件以及优化的夹具,对三种焊接方案的U 型韧性夹的焊接变形进行了计算,从而提出了极向场磁体支撑制造的优化方案。优化后的焊接方案将焊接变形控制在0.6mm 以内。     

可弯曲式有机电玫发光器件的出光率

基于几何光学模型及其原理,推导出在不同弯曲情况下可弯曲式有机电致发光器件的出光率表达式,分析了器件出光率受基板曲率、厚度及有机层折射率的影响,并与平整有机电致发光器件的出光情况作了比较.结果表明:当器件向外弯曲时,出光率随着基板曲率与基板厚度的增大而增大,随着有机层折射率的增大而减小;当器件向内弯曲时,出光率随着基板曲率与基板厚度的增大而减小,随着有机层折射率的增大而减小.对于平整器件,其出光率随有机层折射率的增大而减小.     

柔性衬底白色有机电致发光器件的制备及其性能

采用以ITO为导电层的柔性透明PET基片作为衬底,以2-(2-羟基苯基)苯并噻唑螯合锌(Zn(BTZ),)作为发光层制备出结构为PET／ITO／PVK：TPD／Zn(BTZ)2／Al明亮的近白色柔性有机小分子电致发光器件。发光的色坐标值为x=0．242,y=0．359,在25V的直流电压驱动下,亮度为1000cd／m^2,量子效率达到了0．30％。并进一步在Zn(BTZ)2中掺入橙红色染料Rubrene,制成PET／ITO／PVK：TPD／Zn(BTZ)2：Rubrene／Al结构器件。实现了纯白色发光(色坐标值：x=0．339,y=0．339),非常接近于白色等能点,驱动电压为25V时器件的亮度达1200cd／m^2,且量子效率达0．35％。最后对器件的发光性能及机理进行了深入的研究和探讨。     

Crystal Structure of Dimeric Units Cd2（ncpo）2（phen）2（H2O）2 Constructed by Flexible Dicarboxylic Acid with Fluorescent Emission

A dimeric coordination complex Cd2（ncpo）2（phen）2（H2O）2 was constructed by a flexible dicarboxylic acid, 2-nitro-4-carboxylphenoxyacetic acid. Its crystal structure was determined by X-ray single-crystal diffraction analysis. The crystal is of monoclinic system, space group P21/n with a = 17.2616（3）, b = 12.7460（2）, c = 18.4041（3） A^°, β= 94.432（1）°, C42H30Cd2N6O16, Mr = 1099.52, V = 4037.09（12）A^°^3 Dc = 1.809 g/cm^3, F（000） = 2192, μ = 1.139 cm^-1 and Z = 4. The final R = 0.0218 and wR = 0.0703 for 8288 observed reflections with I 〉 2σ（I）. There are two crystallographically independent but structurally very similar molecules in the unit cell of the title complex. It is noticeable that the ligand ncpo^2- displays a good flexibility, demonstrating different modes from the rigid ligands. The luminescence property has been investigated, which shows photoluminescence at 465, 490 and 574 nm upon excitation at 320 nm in the solid state at room temperature.     

配位聚合物[Zn(PDA)(obix)]的合成、晶体结构和荧光性质

Hydrothermal reaction between 1,4-phenylenediacetic acid (H₂PDA) and Zn(NO₃)₂·6H₂O at the presence of the second ligand of 1,2-bis((1H-imidazol-1-yl) methyl)benzene (obix) yields a new 2D metal-organic coordination polymer [Zn(PDA)(obix)] (1), which has been characterized by single-crystal X-ray diffraction, elemental analysis, IR spectroscopy and thermal analysis. Complex 1 presents a two-dimensional (2D) sheet structure and displays strong luminescent emission at room temperature. CCDC: 716984.     

基于柔性硫醚与Cu2Br2单元二维配位聚合物的合成、结构和荧光性质

A complex [Cu₂Br₂(L)₂]_n(1) (L=bis(2-pyrimidinylthio)methane) has been synthesized and structurally characterized. Complex 1 contains dinuclear Cu₂Br₂ units, which are linked by ditopic L to form a 2D layer structure with a 36-membered macrometallocycle. The adjacent layers are further connected through interpyrimidyl rings C-H…N and π-π interactions to give rise to a three-dimensional supramolecular structure. Complex 1 also displays strong green solid-state photoluminescence, due to metal-to-ligand charge-transfer (MLCT) at room temperature. CCDC: 711434.     

A novel electromagnetism‐assisted imprinting technology to replicate microstructures onto a large‐area curved surface using a flexible magnetic mold

Replication of microstructures from a mold onto a curved surface is difficult. The conformal contact between the mold and the substrate has to be ensured. The present study proposes an innovative mechanism, which employs an electromagnetic disk to provide magnetic force and a PDMS flexible mold with a layer compounded magnetic powder. This mechanism provides not only the gradual contact from center to edge to avoid air entrapment but also conformal contact between the mold and the substrate during the imprinting operation. A system based on this electromagnetic soft imprinting technology has been implemented, and imprinting to replicate microstructures from the mold onto a curved surface has been carried out. The results reveal that the PDMS magnetic mold and the electromagnetic disk‐controlled magnetic force can successfully perform the imprinting and accurately replicate the microstructures onto the large‐area, curved surface glass. The PDMS flexible magnetic mold incorporated with the magnetic disk can be employed to achieve the conformal contact between the mold and the substrate. In addition, due to the low surface free energy of the PDMS, the de‐molding without sticking can be easily accomplished. Copyright © 2008 John Wiley & Sons, Ltd.     

柔性曲梁多体系统的研究现状和展望

本文对近几年来柔性多体系统建模理论的研究进展进行了评述, 详细阐述了曲梁结构多体系统动力学研究的理论背景和工程意义. 结合连续介质力学和多体系统动力学理论, 介绍了平面曲梁、空间曲梁应变位移场的描述以及几何非线性问题研究现状. 通过国内外文献及已有的研究, 综述了现有曲梁的离散化方法, 以及这些方法对于定曲率、变曲率曲梁的适用性. 然后, 总结了曲梁刚柔耦合动力学建模和数值计算中的难点问题, 介绍了平面曲梁、空间曲梁实验研究的现状. 最后, 综合全文, 提出了目前研究存在的难点问题, 以及计划解决这些难点问题的方法.      

柔性多体碰撞问题的多变量方法

针对柔性多体系统碰撞问题的特点, 提出了柔性多体系统碰撞问题的多变量方法. 在未碰撞阶段和分离后的阶段, 多变量方法考虑了物体大范围运动与变形的耦合.在碰撞阶段, 考虑非碰撞区域的变形, 对非碰撞区域用浮动参考系方法求解, 对发生碰撞的局部区域用非线性有限元方法求解. 非碰撞区域采用浮动基位形坐标和柔性体相对浮动基的变形模态坐标描述, 大大减缩了变量的维数,提高了计算效率. 碰撞局部区域采用非线性有限元节点坐标描述, 可以得到碰撞局部区域高精度的应力、应变响应, 而且可以反映碰撞局部区域的大变形、塑性等非线性响应. 该方法既能体现碰撞对系统大范围运动和长期动力学仿真的影响, 又能精确反映出碰撞发生的微小时间段内物体碰撞局部区域的应力、应变响应, 表现出碰撞过程中物体接触区域的演化历程.介绍了两杆正碰撞与铅垂面内双摆撞击自由圆盘的算例, 设计了两柔性杆正碰撞实验,多变量方法的数值仿真结果与实验测量结果很好地吻合.