基于低通滤波的相位掩模干涉图相位解调方法

 传统的四步相移算法在分析相位掩模干涉图时存在相移值误差、分辨力降低和相干噪声等不足,从而影响了动态干涉仪的性能。为了提高相位掩模干涉图的分析精度,提出了一种基于低通滤波的相位解调方法。该方法根据相位掩模引入相位的空间频率远大于被测相位空间频率的最大值,采用低通滤波的方法提取相位信息。数值分析结果表明,该方法的精度高于传统四步相移算法。分析干涉图的信噪比,合理选择低通滤波器,可进一步提高相位解调的精度。     

基于解耦差分泽尼克待定系数法的二维横向剪切波面重建算法

横向剪切干涉术是一种自参考干涉计量技术,其原理是被检测波前与其自身被剪开的波前之间在重叠范围内相干涉,由干涉图得到两相互剪切波前的波前差,通过波面重建算法得到待测波面.在波面重建算法中,泽尼克待定系数法是其中的一种.分析了横向剪切干涉技术的测量原理;提出了一种新的基于解耦差分泽尼克待定系数法的二维横向剪切波面重建算法....     

High coercive Nd-Fe-B magnets fabricated via two-step sintering

The fabrication of Nd₁₁Dy₄Fe_76.5TM_2.5B₆ (TM=Co, Cu, Al, and Nb: at%) sintered magnets via a two-step sintering process was demonstrated. A densification of greater than 99% was achieved using the two-step sintering of the Nd-Fe-B powder. This process produced a sample with an average grain size of 6.2 μm in the Nd₂Fe₁₄B phase, resulting in an enhancement of the coercivity compared to that of the isothermally sintered sample. The suppression of grain growth was considered to be affected by the relatively low temperature during the two-step sintering and by the presence of a B-rich phase at the triple junction. Consequently, the two-step sintering process led to suppression of grain growth and a uniform grain size distribution, which resulted in improved magnetic properties, in particular in the intrinsic coercivity.     

On the stability of two new two-step explicit methods for the numerical integration of second order initial value problem on a variable mesh

We present two novel two-step explicit methods for the numerical solution of the second order initial value problem on a variable mesh. In the case of a constant mesh the method is superstable in the sense of Chawla (1985). Numerical experimentation is provided to verify the stability analysis.     

CAE-based compensation methods of non-uniform pulse laser beam profiles

Applying the pulse laser to speckle methods, non-uniformities of the laser beam profiles and the intensities between each laser pulse have unpleasant consequences on the intensity distribution of the recorded images and following on the assigned fringes of the corresponding subtractive result. This contribution introduces a computer-based technique for compensating this technical and physical problem, so that the fringe quality is improved, even if the homogeneity of the laser beam profiles is on such low level, that the conventional (subtractive) technique fails. The solution is based on algorithms, which refines each intensity distribution and is comparable with the known shading correction.     

Optical inspection and characterization of microoptics using confocal microscopy

With the growing demand for microoptics in different areas the importance of the characterization increases. Methods for a fast defect detection in microlens arrays are developed. We present a technique where the confocal principle is applied for determining the variation and the absolute value of the focal length. Additionally, using a self–filtering method the deviation of the periodic structure of microlens arrays is investigated theoretically and experimentally. Point-like defects as well as aberrations have been detected. The introduced methods allow the fast, parallel characterization of microlens arrays.     

光源编码的白光散斑剪切干涉计量术

本文提出了一种用非相干光源照明进行剪切干涉计量的方法—光源编码的白光散斑剪切干涉计量术.它采用光栅对光源进行编码以提高空间相干性,使物体的两个剪切像的波面部分相干叠加,以实现剪切干涉.     

Speckle interferometry for measurement of continuous deformations

Improvements of a method for measurement of continuous displacements and deformations with digital phase shifting speckle pattern interferometry are presented. The method is based on an algorithm that, with the knowledge of the initial phase, only needs one image at a time to evaluate continuos phase changes due to object deformations. In the improved method, the initial random phase of the speckle pattern is evaluated using a number of phase-shifted images before the deformation under study. This is used for increasing the accuracy of the initial phase estimation and reducing influences from image noise and other measurement disturbances. The phase-shifted speckle patterns are used as references for comparison with the speckle patterns of the deformed object, thereby increasing the reliability and accuracy of the phase estimations of the deformed patterns. The technique can be used for measuring deformations such as transients and other dynamic events, heat expansion as well as other phenomena where it is difficult to accomplish phase shifting during deformation.