Wavelet subspace decomposition of thermal infrared images for defect detection in artworks

Health of ancient artworks must be routinely monitored for their adequate preservation. Faults in these artworks may develop over time and must be identified as precisely as possible. The classical acoustic testing techniques, being invasive, risk causing permanent damage during periodic inspections. Infrared thermometry offers a promising solution to map faults in artworks. It involves heating the artwork and recording its thermal response using infrared camera. A novel strategy based on pseudo-random binary excitation principle is used in this work to suppress the risks associated with prolonged heating. The objective of this work is to develop an automatic scheme for detecting faults in the captured images. An efficient scheme based on wavelet based subspace decomposition is developed which favors identification of, the otherwise invisible, weaker faults. Two major problems addressed in this work are the selection of the optimal wavelet basis and the subspace level selection. A novel criterion based on regional mutual information is proposed for the latter. The approach is successfully tested on a laboratory based sample as well as real artworks. A new contrast enhancement metric is developed to demonstrate the quantitative efficiency of the algorithm. The algorithm is successfully deployed for both laboratory based and real artworks.     

用于宽谱带发射白色发光二极管的黄色荧光粉Sr8MgAl(PO4)7∶xEu2+的制备及发光性能

通过高温固相反应合成了一系列宽谱带发射黄色荧光粉Sr_8MgAl(PO_4)_7∶x Eu~(2+)(SMAP∶x Eu~(2+)),并对其物质结构、发光性能及其在白色发光二极管(WLED)领域的应用进行了探究。X射线衍射(XRD)测试结果表明,SMAP∶x Eu~(2+)系列荧光粉具有单斜结构和C2/m空间群,激活剂Eu~(2+)离子能够很好地进入SMAP基质中并占据Sr~(2+)离子的晶格位点。漫反射光谱分析显示SMAP基质属于宽带隙材料,带隙宽度为3.60 e V。此外,SMAP∶x Eu~(2+)具有较宽的激发范围(280～500 nm),对应于Eu~(2+)离子的4f~7→4f~65d~1跃迁;在380 nm近紫外光激发下,呈现出450～800 nm的多发光中心的非对称黄光发射,发射峰位于590 nm处。基于高斯多峰拟合结果,得到3个发光中心,分别位于528、600和680 nm。最后,将已制备的黄色荧光粉SMAP∶0.05Eu~(2+)与商业化蓝粉Ba Mg Al_(10)O_(17)∶Eu~(2+)混合涂覆到400 nm芯片上制得色温较好(3 344 K)、显色指数较高(90.1)的WLED。     

两种发电机励磁系统远程监测与控制方法研究

同步发电机励磁控制系统的监控是保证发电机良好运行的重要部分,远程监控技术能够有效的对发电机励磁控制系统进行监控,并为励磁控制系统维护人员提供方便.因此针对同步发电机励磁控制系统的典型监测和控制功能,给出了两种发电机励磁系统远程监控方法,首先基于AJAX技术,给出了一种基于web的励磁控制系统远程监测方法,所设计的监测系统能够在局域网或internet网络环境下,使用计算机或智能手机的浏览器进行励磁控制系统的监测,实际测试表明该方法是可行的.之后,为能实现励磁控制系统的远程实时控制,并解决internet网络环境下实时数据传输不稳定的情况,给出了一种基于TCP/IP和VPN技术的励磁控制系统远程监控方法,测试表明该方法能够实现励磁控制系统的实时监测和控制.     

Cooling-down of thermal thick probes after flash excitation – A measure for the real energy density?

Though flash lamps are one of the most applied heat sources in the field of Thermographic Testing (TT) using active thermography, only little is known about the actually achieved energy input into test objects. In this paper, an easy to realize sensor concept is proposed and experimentally evaluated. The concept is based on the measurement of the surface temperature of a thermal thick probe after flash excitation. After considering the sensor concept with FEM simulations the experimental investigation of four materials (two polymer and two building materials) is described. It will be shown that a suited coating is essential for the realization of the sensor concept. The experimental results prove the suitability of black rigid PVC as the most promising material. Using a coated PVC sample the energy density of short laser pulses, similar to flashes of flash lamps, could be determined exactly with an estimated relative uncertainty of only a few percent.     

DNA Nanoflowers for Multiplexed Cellular Imaging and Traceable Targeted Drug Delivery

We present a facile approach to make aptamer‐conjugated FRET (fluorescent resonance energy transfer) nanoflowers (NFs) through rolling circle replication for multiplexed cellular imaging and traceable targeted drug delivery. The NFs can exhibit multi‐fluorescence emissions by a single‐wavelength excitation as a result of the DNA matrix covalently incorporated with three dye molecules able to perform FRET. Compared with the conventional DNA nanostructure assembly, NF assembly is independent of template sequences, avoiding the otherwise complicated design of DNA building blocks assembled into nanostructures by base‐pairing. The NFs were uniform and exhibited high fluorescence intensity and excellent photostability. Combined with the ability of traceable targeted drug delivery, these colorful DNA NFs provide a novel system for applications in multiplex fluorescent cellular imaging, effective screening of drugs, and therapeutic protocol development.     

Rational Design of Cyclometalated Iridium(III) Complexes for Three-Photon Phosphorescence Bioimaging

Compared to 2PE (two-photon excitation) microscopy, 3PE microscopy has superior spatial resolution, deeper tissue penetration, and less defocused interference. The design of suitable agents with a large Stokes shift, good three-photon absorption (3PA), subcellular targeting, and fluorescence lifetime imaging (FLIM) properties, is challenging. Now, two Ir^III complexes (3PAIr1 and 3PAIr2) were developed as efficient three-photon phosphorescence (3PP) agents. Calculations reveal that the introduction of a new group to the molecular scaffold confers a quadruple promotion in three-photon transition probability. Confocal and lifetime imaging of mitochondria using Ir^III complexes as 3PP agents is shown. The complexes exhibit low working concentration (50 nm ), fast uptake (5 min), and low threshold for three-photon excitation power (0.5 mW at 980 nm). The impressive tissue penetration depth (ca. 450 μm) allowed the 3D imaging and reconstruction of brain vasculature from a living specimen.     

多枝[1,3,4]-噁二唑衍生物的双光子吸收和光功率限幅特性

采用非线性透过率法测定了多枝[1,3,4]-噁二唑衍生物的双光子吸收性质. 测定了化合物的单光子荧光光谱和双光子荧光光谱, 在800 nm波长的激光激发下, 9-乙基-3,6-双{5-(4-叔丁基苯基)-[1,3,4] 噁二唑-2-苯乙烯基}-咔唑(3)和三-{5-(4-叔丁基苯基)-[1,3,4] 噁二唑-2-苯乙烯基-4-苯基}-胺(4)能够发出很强的蓝色和黄绿色双光子上转换荧光, 荧光峰分别位于485和547 nm. 这些多枝结构化合物的双光子吸收截面较大(数值超过104 GM), 并具有很强的光限幅效应. 多枝分子中重复单元的推拉电子结构和协同效应有效地增强了分子的双光子吸收性质.     

介孔分子筛Al-MCM-41的合成与催化异构化性能

采用正硅酸乙酯(TEOS)为硅源,九水硝酸铝为铝源,十六烷基三甲基溴化胺(CTMABr)为模板剂,在室温条件下合成了介孔Al-MCM-41分子筛.通过XRD、N2等温吸附、SEM、FTIR等分析测试手段表征了分子筛的介孔结构和表面性质.结果表明所合成的分子筛有良好的介孔结构和较高的有序度,并且有较高的比表面积(达到816 m2·g-1)和窄的孔径分布.采用程序升温的焙烧方式、凝胶Al/Si比最大范围控制在0.06～0.13有利于合成高度有序的介孔Al-MCM-41分子筛.评价结果表明,所合成的Al-MCM-41分子筛对桥式四氢双环戊二烯(endo-TCD)异构化反应合成挂式异构体exo-TCD及金刚烷具有较高的催化活性和极高的选择性.     

蒙特卡罗模拟四极阱中原子的参变激发

在中性原子的磁囚禁实验中,磁阱线圈的电流噪声会激发磁阱中的原子运动,势必对原子团的温度和寿命产生不可忽视的影响。对于非简谐阱,这种激发具有能量选择特性,它又取决于电流噪声的频谱分布。选择了实验中常用的四极阱为研究对象,用直接模拟蒙特卡罗方法来模拟四极阱中原子运动的参变激发现象,得到了原子温度与原子数损失随激发频率的变化关系,并进一步计算了两个共振峰处原子温度随调制时间和调制深度的变化曲线。此外,还研究了弹性碰撞速率对参变激发过程中原子温度上升的影响。这些结果对四极阱参变激发的实验有较好的参考价值。     

弱耦合多原子半无限晶体中磁极化子的激发能量

近年来国内外对多原子极性晶体中磁极化子性质的研究十分活跃,Zorkani等采用变分法计算了束缚磁极化子的基态能量,Kandemir等采用束缚朗道态讨论了二维大磁极化子的基态和第一激发态能量,国内一些学者采用微扰法和新颖算符法讨论了多原子极性晶体中表面和体磁极化子的性质。采用线性组合算符和幺正变换,研究磁场中多原子半无限极性晶体中电子和光学声子弱耦合相互作用所产生的极化子的第一激发态能量及平均声子数。结果表明:当电子无限接近晶体表面时,磁极化子的基态能量仅为Landau能量;第一激发态能量为Landau基态能量的2倍;平均声子数等于各支与电子耦合的体光学声子数和表面光学声子数之和。而当电子处于晶体深处时,磁极化子的基态能量却为Landau基态能量与各支体光学声子以及表面光学声子分别耦合的能量之和;第一激发态能量仍为Landau基态能量的2倍;平均声子数等于各支与电子耦合的体光学声子数和与所处深度有关的各支体光学声子数之和,而与各支表面光学声子无关。