Particle dynamics and particle heat and mass transfer in thermal plasmas. Part III. Thermal plasma jet reactors and multiparticle injection

Thermal plasma processing involves complex interactions of particulates with plasmas. In previous studies (see Parts I and II of this series), an assessment of different effects has been made considering the dynamics and heat and mass transfer of a single particle immersed into a thermal plasma. The last paper of this sequence is concerned with the simulation of thermal plasma jet reactors and the effects caused by multiparticle injection.A mathematical model is proposed for the simulation of thermal plasma jet reactors, including the mixing phenomena between the jet and the surrounding gases by generalizing the governing equations for simple mixing flows. Also included is the density fluctuation effect by extending the K- model to a four-equation turbulence model combined with a probability density function. This model is internally consistent covering additional physical phenomena which are not covered by existing models. Unfortunately, its expected higher accuracy cannot be proven because of the present uncertainties associated with the input.For multiparticle injection, the simulation repeats calculations for single-particle injection, but with different initial conditions correcting the solutions by considering the coupling effects between particles and the plasma.The results indicate that (i) thermal plasmas show different mixing behavior in different gases; (ii) the density fluctuation effect is important since it causes large differences between the mass-weighted and unweighted time-averaged temperatures of thermal plasma jets; (iii) coupling effects become important when the particle loading rate exceeds half of the plasma mass flow rate; (iv) there are 16 constraints imposed on the modeling work which have to be considered for establishing a base for comparison with future experimental studies.     

Eu<Superscript>3+</Superscript>-fluorescence properties in nano-crystallized SnO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> glass-ceramics

Fluorescence and spectral hole burning properties of Eu³⁺ ions were studied in nanocrystals-precipitated SnO₂-SiO₂ glasses. The glasses were prepared to contain various amount of Eu₂O₃ using the sol-gel method, in which SnO₂ nanocrystals were precipitated by heating in air. In the glasses containing Eu₂O₃ less than 1%, the Eu³⁺ ions were preferentially doped in the SnO₂ nanocrystals and their fluorescence intensities were enhanced by the energy transfer due to the recombination of electrons and holes excited in SnO₂ crystals. The SnO₂ nanocrystals-precipitated glasses exhibited the persistent spectral holes with the depth of ∼25% of the total fluorescence intensities of the Eu³⁺ ions. With the increasing Eu₂O₃ concentration, the amount of SnO₂ nanocrystals decreased and the Sn⁴⁺ ions formed the random glass structure together with the silica network. This structure change induced the fluorescence intensities and the hole depth to decrease.     

Spatial relaxation of electrons in nonisothermal plasmas

The spatial relaxation of electrons to homogeneous states under the action of space-independent electric fields is investigated in helium, krypton, and N₂ plasmas for various electric field strengths. These investigations are based on a new method recently developed for solving the one-dimensional inhomogeneous electron Boltzmann equation in weakly ionized, collision-dominated plasmas. Elastic as well as conservative inelastic collisions of electrons with gas atoms have been included in the kinetic treatment. The spatial relaxation is caused by an imposed direct disturbance in the velocity distribution of the electrons on a spatial boundary. A pronounced dependence of the relaxation structure and the resultant relaxation length on the atomic data of the electron collision processes in different gases has been found. Furthermore the relaxation process sensitively depends on the electric field strength in the region of medium field values.     

BaF（Cl,Br）：Sm^2＋的光谱烧孔与光激励发光过程

Ｘ射线辐照前后，在ＢａＦ（Ｃｌ，Ｂｒ）：Ｓｍ＾２＋中以５６０ｎｍ的Ｎｄ：ＹＡＧ脉冲光在液氮温度下进行了双光子烧孔实验和光激励发光实验，结果表明，Ｓｍ＾２＋掺杂的碱土金属氟卤化物光谱烧孔过程中伴随着光激励发光过程，这一过程直接影响光谱烧孔过程的进行。     

Volumetric, ultrasonic and viscometric studies of binary mixtures of dimethyl sulphoxide with chloro and nitro substituted aromatic hydrocarbons at T = 303.15 K

Excess volumes (V^E) ultrasonic sound velocities (u), isentropic compressibilities (K_s) and viscosities (η) have been measured for the binary mixtures of dimethylsulphoxide (DMSO) with 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,2,4-trichlorobenzene, o-chlorotoluene, m-chlorotoluene, p-chlorotoluene, o-nitrotoluene and m-nitrotoluene at T = 303.15 K. The measured V^E values were positive over the entire composition range in all the binary mixtures. Isentropic compressibilities (K_s) have been computed for the same systems from precise sound velocity and density data. Further, deviation in isentropic compressibility (ΔK_s) from ideal behaviour was also calculated. The viscosity data are analysed on the basis of corresponding states approach. Deviation in viscosities are positive over the entire composition range. The measured data is explained on the basis of intermolecular interactions between unlike molecules.     

Variation of physicochemical properties in the aggregates of structual isomers

The regions of variation of density, enthalpy of formation, and detonation velocity of all of the formally possible structual isomers were determined for several molecular formulas of C,H,N,O-containing explosives. The histograms of the distribution of the structual isomers over these parameters were constructed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 859–862, May, 1995.The authors are grateful to Mrs. I. D. Solodukhina for the design of the graphical material.The work was carried out with the financial support of the Russian Foundation for Basic Research (Project No. 94-03-09323).     

The nonsymmetric pressure tensor in polyatomic fluids

Nonequilibrium molecular dynamics calculations are used to show that polyatomic fluids can support antisymmetric stress. In a homogeneous system where the time dependence of vorticity is a step function, it is shown that the rate at which intrinsic angular velocity approaches its steady-state value ( = 1/2 × u) is determined by the magnitude of the antisymmetric part of the pressure tensor.     

Cooling Characteristics During Bath Quenching of Test Probe Using Inverse Heat Transfer

It is of engineering importance to accurately predict the surface cooling characteristics in bath quenching of metals and alloys. In this investigation, the surface cooling characteristics in quenching of Wolfson probe are estimated with reasonable accuracy by solving an inverse heat conduction problem. Regularization method is used for smoothening the input temperature measurements at probe center, for superior inversion estimates. The reverse pool-boiling curve is captured on bath quenching characteristic, plotted as cooling velocity versus surface temperature. The prime advantage is the bypassing of convection coefficients, which are uncertain in pool boiling.     

The effective ionization coefficients and electron drift velocities in gas mixtures of CF3I with N2 and CO2 obtained from Boltzmann equation analysis

The electron swarm parameters including the density-normalized effective ionization coefficients(α-η)/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend(SST) experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td(1 Td = 10-17V·cm2),while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of(αη)/N with the CF3I mixture ratio k,the limiting field strength(E/N) lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of(E/N) lim are essentially the same as that for pure SF 6.Additionally,the global warming potential(GWP) and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.     

Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.