Time-domain simulations of sound propagation through screen-induced turbulence

A flow model in combination with a statistical-dynamical turbulence generator and a linearised Euler time-domain model for sound waves were used to simulate the effect of screen-induced turbulence on the noise level in the acoustical shadow of a screen in wind. Instead of simulating a great number of different frozen turbulence realisations, the concept of transient turbulence was successfully tested and applied. This concept is adequate to the time-domain model and reduces the computational demands. Several two-dimensional simulations allowed to isolate the individual effects of wind and screen on the propagation of 500 Hz sound waves over a 4-m high noise barrier. At a distance of 250 m from the source (240 m behind the screen) the sheltering effect of the screen and the refraction effect of the wind are in the order of 6 and 4 dB, respectively. The screen-induced turbulence leads to fluctuations in the noise level with a standard deviation of 1.2 dB and a maximum amplitude of 3 dB. However, the time averaged effect turned out to be in the order of merely 0.2 dB. The effect of the screen-induced turbulence on the average noise level behind the screen is therefore negligible.     

Large-scale computer simulation of fully developed turbulent channel flow with heat transfer

Recently, with the advent of supercomputers, there has been considerable interest in the use of direct numerical simulation to obtain information about turbulent shear flow at low Reynolds number. This paper presents a pseudospectral technique to solve the full three-dimensional time-dependent Navier-Stokes and advection-diffusion equations without the use of subgrid-scale modelling. The technique has not been previously used for fully developed turbulent channel flow simulation and is based on methods applied in other contexts. The emphasis of this paper is to provide a reasonably detailed account of how the simulation is done rather than to present new calculations of turbulence. The details of an algorithm for turbulent channel flow simulation and the grid and time step sizes needed to integrate through transient behaviour to steady state turbulence have not been published before and are presented here. Results from a Cray-2 simulation of fully developed turbulent flow in a channel with heat transfer are presented along with a critical comparison between experiment and computation. The first- and second-order moments agree well with experimental measurements; the agreement is poor for higher-order moments such as the skewness and flatness near the walls of the channel. Detailed information given about the effects of spatial grid resolution on a computed results is important for estimating the size of the computation required to study various aspects of a turbulent flow.     

Single-server queues with spatially distributed arrivals

Consider a queueing system where customers arrive at a circle according to a homogeneous Poisson process. After choosing their positions on the circle, according to a uniform distribution, they wait for a single server who travels on the circle. The server's movement is modelled by a Brownian motion with drift. Whenever the server encounters a customer, he stops and serves this customer. The service times are independent, but arbitrarily distributed. The model generalizes the continuous cyclic polling system (the diffusion coefficient of the Brownian motion is zero in this case) and can be interpreted as a continuous version of a Markov polling system. Using Tweedie's lemma for positive recurrence of Markov chains with general state space, we show that the system is stable if and only if the traffic intensity is less than one. Moreover, we derive a stochastic decomposition result which leads to equilibrium equations for the stationary configuration of customers on the circle. Steady-state performance characteristics are determined, in particular the expected number of customers in the system as seen by a travelling server and at an arbitrary point in time.     

A decomposition result for a class of polling models

Boxma and Groenendijk have shown that the workload in polling models decomposes into two independent variables. This paper demonstrates a different type of decomposition that has an explicit multi-dimensional form. This decomposition does not apply to all polling models, but does, for example, apply to models with constant switch-over times and either exhaustive or gated service disciplines. For such models, we show that the population of customers present in the system (represented by a vector indicating the number of customers at each queue) at key time points breaks into two independent subpopulations: (1) the population of customers present in the related model with zero switch-over times; (2) another population, which is particularly easy to analyze. This result has a number of theoretical and applied implications.     

Expert consensus in solo voice performance evaluation

Experts were interviewed to identify criteria for evaluation of vocal performance. A scale was then constructed and inter- and intrajudge reliability assessed. Experts listened to 19 different performances, plus 6 presented a second time. Interjudge reliability for one judge was modest, but increased dramatically as the size of the judge panel increased. The most reliable items were overall score and intonation accuracy. Diction was less reliable than other items. Intrajudge reliability was higher for overall score than for any other item. A factor analysis on the test items yielded factors labelled intrinsic quality, execution, and diction. Another factor analysis, using the experts as variables, revealed two underlying evaluative dimensions. It was found that 13 experts were primarily influenced by execution, and that 8 were mainly affected by intrinsic quality. Interjudge and intrajudge reliabilities of these two groups differed.     

监测Lévy稳定过程均值变点的平均运行时间估计

平均运行长度(时间)(ARL)是判断一控制图监测变点效果好坏的一个重要工具.本文主要研究Lévy稳定过程的均值变点监测问题.我们给出了三个控制图,即EWMA,GEWMA和GLR的ARL估计,并通过数值模拟比较了4个控制图监测均值变点的效果和差异.     

Dependence of calculated electron effective attenuation lengths on transport mean free paths obtained from two atomic potentials

We report changes in electron effective attenuation lengths (EALs) resulting from use of transport mean free paths (TMFPs) obtained from the Dirac–Hartree–Fock (DHF) potential instead of the Thomas–Fermi–Dirac (TFD) potential in an algorithm used in the National Institute of Standards and Technology (NIST) Electron Effective‐Attenuation‐Length Database (SRD 82). TMFPs from the former potential are believed to be more reliable than those obtained from the latter potential. We investigated changes in the EALs for selected photoelectron and Auger‐electron lines in four elemental solids (Si, Cu, Ag, and W), for Si 2p photoelectrons of varying energy in SiO₂, and for photoelectrons excited by Al Kα X rays in four candidate gate‐dielectric materials (HfO₂, ZrO₂, HfSiO₄, and ZrSiO₄). For each material, we computed the change in the average EAL for a range of overlayer‐film thicknesses from zero to a maximum value corresponding to attenuation of the substrate signal to 10% of its original value. This EAL change was a maximum for electrons emitted normally from the surface and decreased monotonically with increasing emission angle. The maximum EAL change varied between ?4.4% and 2.6% for the three groups of materials. We found that the maximum EAL change correlated mainly with the TMFP change. We found that TMFP changes in other solids could generally lead to maximum EAL changes between ?2.6% and 1.9% for electron energies between 500 and 2000 eV. For lower energies, the maximum EAL changes could be larger for some solids. Our revised EALs for Si 2p photoelectrons in SiO₂ excited by Mg and Al Kα X rays agree within 0.5% with values reported by Seah and Spencer from a detailed analysis of SiO₂ film‐thickness measurements by XPS and other techniques. Copyright © 2006 John Wiley & Sons, Ltd.     

Algorithmic analysis of theMAP/PH/1 retrial queue

In this paper the distribution of the maximum number of customers in a retrial orbit for a single server queue with Markovian arrival process and phase type services is studied. Efficient algorithm for computing the probability distribution and some interesting numerical examples are presented.     

Relationships between characteristics in periodic Poisson queues

We study single server periodic queues in the day equilibrium conditions. The following characteristics of interest are considered at time of dayt: V^p(t)-the work load, L^p(t)-the number of customers and u^p(t)-the departure rate. We give relationships between E[V^p(t)], E[L^p(t)] and u^p(t). We also prove that E[V^p(t)] < and E[L^p(t)] < provided the second moment of the service time is finite.     

Electron microscope study of viscoelastic cationic surfactant systems

Some cationic surfactants such as cetyltrimethylammonium bromide (CTAB) show a very spectacular viscoelasticity in solution, in even very diluted states, with some aromatic substances added, such as salicylic acid. Formerly, the authors established that the remarkable solution behaviour was the result of the entanglement of such enormously elongated giant micelles, based on recognition of the existence of large aggregates, through direct observation of them as substantial images under the electron microscope.In this report, we further confirm the relation between micelle length and solution viscoelasticity after arbitrarily obtaining different size aggregates by altering the media pH, or by admixing shorter chain length surfactants than CTAB, which alone did not induce viscoelasticity.