Rapid simultaneous determination of isoflavones in Radix puerariae using high-performance liquid chromatography-triple quadrupole mass spectrometry with novel shell-type column

A high-performance liquid chromatography (HPLC) coupled with triple quadrupole mass spectrometry (MS/MS) method was developed for rapid determination of 13 isoflavones in Radix puerariae. A novel shell-type column, namely Kinetex core-shell C(18) column (50 mm×2.1 mm id, 2.6 μm), and gradient elution were used during the analysis. The chromatographic peaks of 13 investigated compounds were identified by comparing their retention time and MS data with the related reference compounds. Multiple-reaction monitoring (MRM) was employed for the quantitative analysis with negative ionization mode. All calibration curves showed good linearity (r(2)>0.9990) within test ranges. The LOD and LOQ were lower than 0.017 and 0.873 μg/mL on column, respectively. The intra- and inter-day precisions for 13 analytes were <1.17 and 2.17%, respectively, and the recoveries were 93.1-104.4%. The validated method was applied for quantitative analysis of 13 isoflavones in 7 species of Radix puerariae. The result demonstrated that HPLC-MS/MS system with Kinetex column could be a promising analytical tool for the determination of isoflavones in traditional Chinese medicines, which is helpful for comprehensive evaluation of quality of R. puerariae.     

无死体积蚀刻多孔膜接口的制作及其在二维毛细管电泳分离系统中的应用

介绍了一种在毛细管柱上原位腐蚀而成的多孔膜接口的制作方法,并用该接口构建了一类毛细管电泳二维分离技术平台。柱上原位腐蚀刻成的多孔膜接口具有零死体积、制作过程简易、成本低廉、耐用、柱间切换便捷等优点,特别适合作为基于毛细管柱的二维及多维电泳联用中的接口,是目前二维及多维毛细管柱联用中一类较为新型、实用、理想的接口。以鹿茸冻干粉可溶物样品为例,验证了该接口在二维毛细管电泳联用系统中的可行性和分离效能。实验结果表明：鹿茸冻干粉可溶物整个二维分离分析的时间在1 h内完成,二维分离系统的分辨率和总峰容量都比一维的高。     

Influence of acid treatments of carbon nanotube precursors on Ni/CNT in the synthesis of carbon nanotubes

The Ni/CNT catalyst was fabricated by directly dipping carbon nanotube precursors refluxed in 4 M of nitric acid into Ni electroless plating bath, and used to synthesize new carbon nanotubes. The experimental results indicate that the duration of acid-treatment of carbon nanotubes precursors exerts a great influence on the catalysis of Ni/CNT in the synthesis of carbon nanotubes and hence the structures of the new carbon nanotubes. When the carbon nanotubes precursors were refluxed for 0.5 h in 4 M of nitric acid, bamboo-shaped carbon nanotubes (BSCNT) or Y junction carbon nanotubes in the carbon products were obtained. As the duration of acid-treatment of carbon nanotubes precursors increased to 6 h, the as-prepared Ni/CNT displayed higher activity, and the carbon nanotube products were high pure without any Y junction structure or any separation layers in hollow.     

Exploring Effects of Chitosan Oligosaccharides on the DSS-Induced Intestinal Barrier Impairment In Vitro and In Vivo

Intestinal barrier dysfunction is an essential pathological change in inflammatory bowel disease (IBD). The mucus layer and the intestinal epithelial tight junction act together to maintain barrier integrity. Studies showed that chitosan oligosaccharide (COS) had a positive effect on gut health, effectively protecting the intestinal barrier in IBD. However, these studies usually focused on its impact on the intestinal epithelial tight junction. The influence of COS on the intestinal mucus layer is still poorly understood. In this study, we explored the effect of COS on intestinal mucus in vitro using human colonic mucus-secreted HT-29 cells. COS relieved DSS (dextran sulfate sodium)-induced mucus defects. Additionally, the structural characteristics of COS greatly influenced this activity. Finally, we evaluated the protective effect of COS on intestinal barrier function in mice with DSS-induced colitis. The results indicated that COS could manipulate intestinal mucus production, which likely contributed to its intestinal protective effects.     

Collagen-like peptides and peptide–polymer conjugates in the design of assembled materials

Collagen is the most abundant protein in mammals, and there has been long-standing interest in understanding and controlling collagen assembly in the design of new materials. Collagen-like peptides (CLPs), also known as collagen-mimetic peptides (CMPs) or collagen-related peptides (CRPs), have thus been widely used to elucidate collagen triple helix structure as well as to produce higher-order structures that mimic natural collagen fibers. This mini-review provides an overview of recent progress on these topics, in three broad topical areas. The first focuses on reported developments in deciphering the chemical basis for collagen triple helix stabilization, which we review not with the intent of describing the basic structure and biological function of collagen, but to summarize different pathways for designing collagen-like peptides with high thermostability. Various approaches for producing higher-order structures via CLP self-assembly, via various types of intermolecular interaction, are then discussed. Finally, recent developments in a new area, the production of polymer–CLP bioconjugates, are summarized. Biological applications of collagen contained hydrogels are also included in this section. The topics may serve as a guide for the design of collagen-like peptides and their bioconjugates for targeted application in the biomedical arena.     

无机固体材料中的忆阻效应

缺陷调控是固体化学中的基本问题,也是决定材料性能的核心要素。基于缺陷调控的忆阻效应将给未来电子信息领域带来全新的变革。本文综述了无机固体材料中忆阻效应的研究进展,主要总结了忆阻效应的产生机制和忆阻材料的类型,结合原子级p-n结的相关工作,提出深入明确电场下缺陷迁移机制将是从无机固体化学角度研究忆阻效应的重要方向。     

Impact of Reaction Conditions on the Structures of Nickel(II) Complexes Based on 3‐(4‐Carboxyphenyl)propionic Acid

Two new nickel(II) complexes, [Ni(4, 4′‐bpy)(H₂O)₄]_n · n(cpp) · 0.5nH₂O ( 1 ) and [Ni(cpp)(4, 4′‐bpy)(H₂O)₂]_n ( 2 ) [4, 4′‐bpy = 4, 4′‐bipyridine, H₂cpp = 3‐(4‐carboxyphenyl)propionic acid] were synthesized and characterized by single‐crystal X‐ray diffraction, elemental analysis, IR spectroscopy, and thermal analysis. In complex 1 , Ni^II ions are bridged by 4, 4′‐bpy into 1D chains, and cpp ligands are not involved in the coordination, whereas in complex 2 , cpp ligands adopt a bis(monodentate) mode and link Ni^II ions into 2D (4, 4) grids with the help of 4, 4′‐bpy ligands. Triple interpenetration occurs, which results in the formation of a complicated 3D network. The difference in the structures of the two complexes can be attributed to the different reaction temperatures and bases.     

INTERNALIZATION OF GAP JUNCTIONS BETWEEN NEURON AND GLIAL CELL AND FORMATION OF ANNULAR LAMELLAR BODIES IN CHINESE LEECH Whitmania pigra

This paper reveals the formation of annular lamellar body (ALB) in the ganglion of leech by means of in situ fixation and the lanthanum nitrate tracer technique. This formation involves both wrapping and internalization of the gap junctions between glial processes themselves, as well as between neuron and glial process. The results indicate that there is probably an active process of internalization of membrane structures involving gap junctions between neuron and glial cell in the central nervous system in leech. The functions of ALB are discussed.     

一种计算液接电势的新方法*

依据液接电势达稳态时通过边界层的净电荷为零这一思想,提出了一种计算液接电势的新方法。对于3类液接电势的计算,特别是Lewis-Sargent公式与Henderson方程的推导,思路清晰易懂,避免了过往液接电势计算方法存在的一些问题。本文所提出的方法能够为液接电势相关内容的教学提供借鉴。