Real-time onboard wind and windshear determination,part 1: Identification

Standard wind identification techniques employed in the analysis of aircraft accidents are post-facto techniques; they are processed after the event has taken place and are based on the complete time histories of the DFDR/ATCR data along the entire trajectory. By contrast, real-time wind identification techniques are processed while the event is taking place; they are based solely on the knowledge of the preceding time histories of the DFDR/ATCR data.In this paper, a real-time wind identification technique is developed. First, a 3D-kinematic approach is employed in connection with the DFDR/ATCR data covering the time interval preceding the present time instant. The aircraft position, inertial velocity, and accelerometer bias are determined by matching the flight trajectory computed from the DFDR data with the flight trajectory available from the ATCR data. This leads to a least-square problem, which is solved analytically every seconds, with / small.With the inertial velocity and accelerometer bias known, an extrapolation process takes place so as to predict the inertial velocity profile over the subsequent -subinterval. At the end of this subinterval, the extrapolated inertial velocity and the newly identified inertial velocity are statistically reconciled and smoothed. Then, the process of identification, extrapolation, reconciliation, and smoothing is repeated. Subsequently, the wind is computed as the difference between the inertial velocity and the airspeed, which is available from the DFDR data. With the wind identified, windshear detection can take place (Ref. 1).As an example, the real-time wind identification technique is applied to Flight Delta 191, which crashed at Dallas-Fort Worth International Airport on August 2, 1985. The numerical results show that the wind obtained via real-time identification is qualitatively and quantitatively close to the wind obtained via standard identification. This being the case, it is felt that real-time wind identification can be useful in windhsear detection and guidance, above all if the shear/downdraft factor signal is replaced by the wind difference signal (Ref. 1).This paper and its companion (Ref. 1) are based on Refs. 2–4.This research was supported by the Aviation Research and Education Foundation and by Texas Advanced Technology Program, Grant No. TATP-003604020.     

Fastiterative methods for least squares estimations

Least squares estimations have been used extensively in many applications, e.g. system identification and signal prediction. When the stochastic process is stationary, the least squares estimators can be found by solving a Toeplitz or near-Toeplitz matrix system depending on the knowledge of the data statistics. In this paper, we employ the preconditioned conjugate gradient method with circulant preconditioners to solve such systems. Our proposed circulant preconditioners are derived from the spectral property of the given stationary process. In the case where the spectral density functions() of the process is known, we prove that ifs() is a positive continuous function, then the spectrum of the preconditioned system will be clustered around 1 and the method converges superlinearly. However, if the statistics of the process is unknown, then we prove that with probability 1, the spectrum of the preconditioned system is still clustered around 1 provided that large data samples are taken. For finite impulse response (FIR) system identification problems, our numerical results show that annth order least squares estimator can usually be obtained inO(n logn) operations whenO(n) data samples are used. Finally, we remark that our algorithm can be modified to suit the applications of recursive least squares computations with the proper use of sliding window method arising in signal processing applications.Research supported in part by HKRGC grant no. 221600070, ONR contract no. N00014-90-J-1695 and DOE grant no. DE-FG03-87ER25037.     

新型尾式硫代苯并噻唑基卟啉化合物的合成与表征

通过不对称的单羟基卟啉化合物、溴代烷烃和巯基苯并噻唑合成了一系列新型硫代苯并噻唑基尾式卟啉化合物, 并采用核磁共振氢谱、碳谱、红外光谱、质谱和元素分析对卟啉化合物的结构进行了表征.     

Identification of selenium species in urine by ion-pairing HPLC–ICP–MS using laboratory-synthesized standards

This study focused on the detection/identification of possible selenium metabolites in human urine. Organoselenium compounds not commercially unavailable were synthesized and characterized by electrospray mass spectrometry. Separation of selenomethionine, methylselenomethionine, trimethylselonium, selenoethionine, and selenoadenosylmethionine was achieved by ion-pairing HPLC with a mobile phase of 2 mmol L^–1 hexanesulfonic acid, 0.4% acetic acid, 0.2% triethanolamine (pH 2.5), and 5% methanol. The column effluent was introduced on-line to inductively coupled plasma–mass spectrometry for selenium-specific detection (⁷⁷Se and ⁷⁸Se). For selenium speciation in urine, solid-phase extraction was carried out using C₁₈ cartridges modified with hexanesulfonic acid. Selective retention of cationic species was observed from acidified urine (perchloric acid, pH 2.0). After elution with methanol, evaporation, and dissolution in the mobile phase, the sample was introduced to the HPLC–ICP–MS system and the chromatographic peaks were assigned by adding standards. The species identified in urine were selenomethionine, trimethylselonium ion, and selenoadenosylmethionine. The last species was detected for the first time and our results suggest that selenomethionine might enter the metabolic pathway of its sulfur analog in the activated methylation cycle.Kazimierz Wrobel and Katarzyna Wrobel are on the leave from the Institute of Scientific Research, University of Guanajuato, L. de Retana No. 5, 36000 Guanajuato, Gto., Mexico     

Computer interactive identification system for polycyclic aromatic hydrocarbons in reversed-phase microcolumn liquid chromatography

Summary A computer interactive identification system is proposed which is based on the relationship between retention and molecular properties such as the size and shape of polycyclic aromatic hydrocarbons (PAHs). This system offers an automatic analytical process for liquid chromatography, providing a reliable identification of the separated components. The identification can be further enhanced by the use of multiple detectors such as a multichannel UV detector. The system can be used for optimization procedures, resulting in a highly automatic complex analytical system.     

傅里叶变换红外光谱和傅里叶变换拉曼光谱法无损鉴别药材的真伪

利用傅里叶变换红外（FT-IR）和近红外傅里叶变换拉曼（NIR FT-aman）光谱法对大黄（西宁大黄）与伪品大黄（华北大黄、山大黄、水根大黄）进行了无损快速的鉴别。结果表明：尽管正品大黄与伪品大黄差别较小，有大部分的化学成分有很大的相同之处，但在红外、拉曼谱图中各自的特征峰较突出，根据谱峰的强度和位置可容易地将它们区别开来。红外和拉曼光谱法相互印证，相互补充，具有快速、准确、操作简单、重复性好、不需对样品进行分离提取，可直接鉴别等特点。     

皱叶香茶菜化学成分的研究

从采自西藏的皱叶香茶菜中分离鉴定了3对B-闭联对映贝壳杉烯型二萜化合物:二萜化合物皱叶香茶菜素(Ⅰ)和二氢皱叶香茶菜素(Ⅱ);isodocarpin(Ⅲ)和dihydroisodocarpin(Ⅳ)及Carpalasionin(Ⅴ)和dihydrocarpalasionin(Ⅵ)。(Ⅰ)、(Ⅲ)和(Ⅴ)分别与对应的二氢化合物(Ⅱ)、(Ⅳ)和(Ⅵ)以混合物的形式被分离和鉴定。化合物(Ⅱ)为新化合物,(Ⅰ)、(Ⅳ)和(Ⅵ)首次在自然界发现,(Ⅲ)和(Ⅴ)为已知化合物。     

烯烃氢甲酰化催化剂活性物种的原位1H NMR研究

The rhodium-phosphine complex catalyst Rh(CO)(acac)(PPh3)(Ⅰ) for 1-hexene hydroformylation was studied under the following reaction conditions: CO/H2=1(mole rate), pressure 1.0 MPa, temperature 25-120℃, by using the pressurized in-situ 1H NMR technique. Experimental results indicated that the formation of a rhodium hydride complex from (Ⅰ) began at room temperature and its amount increased with increasing of reaction temperature. This intermediate complex began to decompose at 100℃ and disapeared completely at 120℃. The intensity change of the proton signal was parallel to catalytical activity in hydroformylation of olefins. Under pure CO pressure the proton signal of Ph-H bond was not observed. There was a 0.2 ppm difference in proton chemical shifts of Rh-H bond under pure H2 pressure and under H2+CO pressure. The results showed that the rhodium-hydride carbonyl complex is the active intermediate in the industrial hydroformylation process.     

Interaction of gas phase atomic hydrogen with Pt(111):Direct evidence for the formation of bulk hydrogen species

Employing hot tungsten filament to thermal dissociate molecular hydrogen,we generated gas phase atomic hydrogen under ultra-high vacuum(UHV)conditions and investigated its interaction with Pt(111) surface.Thermal desorption spectroscopy(TDS)results demonstrate that adsorption of molecular hy- drogen on Pt(111)forms surface Had species whereas adsorption of atomic hydrogen forms not only surface Had species but also bulk Had species.Bulk Had species is more thermal-unstable than surface Had species on Pt(111),suggesting that bulk Had species is more energetic.This kind of weakly- adsorbed bulk Had species might be the active hydrogen species in the Pt-catalyzed hydrogenation reactions.     

Photocrosslinking of copolymers of vinyloxyethyl methacrylate–styrene initiated by sulfonium salts. I. Transient species formed on photolysis of sulfonium salt

Benzyl cation was detected by transient absorption spectroscopy with a spectroscopic multichannel analyzer on pulse excitation (fourth harmonic of Nd:YAG laser, 266 nm; 10 ns fwhm) of benzyl(4-hydroxyphenyl) methylsulfonium hexafluoroantimonate(BSS) in 1,2-dichloroethane (EDC). The benzyl cation was long-lived (lifetime, 59 ms) at room temperature and quenched by a vinyl ether compound. The formation of the benzyl cation as active species on photolysis of BSS is in contrast to the formation of Brønsted acids in other sulfonium salts so far reported. © 1992 John Wiley & Sons, Inc.