蓝绿光敏感的非水溶性光致聚合物特性研究

报导了一种新型蓝绿光敏感的非水溶性光致聚合物材料,这种材料以聚醋酸乙烯酯为成膜物,9-乙烯基咔唑(NVC),甲基丙烯酸2-苯氧乙脂(POEA)和双季戊四醇五丙烯酸酯为单体,Dye3和Dye4为光敏剂,邻氯代六芳基双咪唑(O-CL-HABI)为共引发剂.本材料能同时对蓝光和绿光敏感,用蓝光和绿光分别或同时对该材料曝光,可得到清晰图像.测得的两种衍射效率分别不低于80%.     

粉末活性炭与碱式氯化铝混凝处理微污染水源水的研究

用粉末活性炭吸附与碱式氯化铝混凝相结合的工艺处理微污染生活水源水,研究活性炭种类、加入量和加入先后等因素对原水嗅味、色度和有机物等去除效率的影响。结果显示,投加40mg/L200mesh活性炭以后再进行混凝,对各种污染物的去除效果较好,对原水异嗅味、色度、浊度、矿物油和苯酚的去除率分别达到71%~90%,对CODMn、TOC和氨氮的去除率分别在47%~53%、26%~27%和10%~18%范围。     

聚(St-DVB)型整体柱的制备及其对蛋白质的色谱分离性能

苯乙烯(St)为单体,二乙烯基苯(DVB)为交联剂,在致孔剂甲苯和十二醇存在下,直接以Ф4.6×50mm色谱柱管为模具,同时在整个反应过程中通过氩气对反应混合物施加一个恒定的压力,通过原位聚合制备了聚(苯乙烯-二乙烯基苯)(PSD)型整体柱。在聚合过程中对反应混合物施加一定的压力,使制备的整体柱表面光滑无凹痕现象,并且使柱子的两头平整不凹陷,有利于提高柱效。本文对整体柱的孔结构及其对蛋白质的分离性能进行了研究。实验结果表明,整体柱内部含有大量类似渠道的大孔,孔径为2μm~3μm,在流速为5ml/min时,背压为7MPa。而且流速对色谱分离效率的影响小,流速从1ml/min增大到3ml/min时,牛血清白蛋白和溶菌酶这两种蛋白质的总分离效能指标K1的值基本保持不变,保持在3.35左右,说明可以通过提高流速实现蛋白质的快速分离。     

Impact of Multi-Component Surrogates on the Performances,Pollutants, and Exergy of IC Engines

Even though there is a pressing interest in clean energy sources, compression ignition (CI) engines, also called diesel engines, will remain of great importance for transportation sectors as well as for power generation in stationary applications in the foreseeable future. In order to promote applications dealing with complex diesel alternative fuels by facilitating their integration in numerical simulation, this paper targets three objectives. First, generate novel diesel fuel surrogates with more than one component. Here, five surrogates are generated using an advanced chemistry solver and are compared against three mechanisms from the literature. Second, validate the suggested reaction mechanisms (RMs) with experimental data. For this purpose, an engine configuration, which features a reacting spray flow evolving in a direct-injection (DI), single-cylinder, and four-stroke motor, is used. The RNG k-Epsilon coupled to power-law combustion models is applied to describe the complex in-cylinder turbulent reacting flow, while the hybrid Eulerian-Lagrangian Kelvin Helmholtz-Rayleigh Taylor (KH-RT) spray model is employed to capture the spray breakup. Third, highlight the impact of these surrogate fuels on the combustion properties along with the exergy of the engine. The results include distribution of temperature, pressure, heat release rate (HRR), vapor penetration length, and exergy efficiency. The effect of the surrogates on pollutant formation (NOX, CO, CO2) is also highlighted. The fifth surrogate showed 47% exergy efficiency. The fourth surrogate agreed well with the maximum experimental pressure, which equaled 85 Mpa. The first, second, and third surrogates registered 400, 316, and 276 g/kg fuel, respectively, of the total CO mass fraction at the outlet. These quantities were relatively higher compared to the fourth and fifth RMs.     

声波团聚净化尿素造粒塔尾气实验研究*

尿素造粒塔大多采用水洗工艺处理尾气粉尘,存在较为严重的细颗粒粉尘溢出和水汽拖尾问题,因此深入探究声波团聚技术在造粒塔尾气处理方面的应用。通过实验研究了声波与喷雾对除尘效率的影响,发现声波单独作用时在3500 Hz达到最佳除尘效率,为74.49%,协同喷雾时2600 Hz即可实现相近的除尘效率,为73.83%。进一步探究其中机理,采用以粒径测试为依据的团聚效率作为评价指标,结果显示,2600 Hz声波与喷雾单独作用时团聚效率分别为30.37%和28.82%,协同作用时团聚效率大幅提升至57.95%。该研究可为后续造粒塔工程改造提供理论与数据支持。     

Joint Optimization of Control Strategy and Energy Consumption for Energy Harvesting WSAN

With the rapid development of wireless sensor technology, recent progress in wireless sensor and actuator networks (WSANs) with energy harvesting provide the possibility for various real-time applications. Meanwhile, extensive research activities are carried out in the fields of efficient energy allocation and control strategy design. However, the joint design considering physical plant control, energy harvesting, and consumption is rarely concerned in existing works. In this paper, in order to enhance system control stability and promote quality of service for the WSAN energy efficiency, a novel three-step joint optimization algorithm is proposed through control strategy and energy management analysis. First, the optimal sampling interval can be obtained based on energy harvesting, consumption, and remaining conditions. Then, the control gain for each sampling interval is derived by using a backward iteration. Finally, the optimal control strategy is determined as a linear function of the current plant states and previous control strategies. The application of UAV formation flight system demonstrates that better system performance and control stability can be achieved by the proposed joint optimization design for all poor, sufficient, and general energy harvesting scenarios.     

GaAs基980nm高功率半导体激光器的研究进展

GaAs基980 nm半导体激光器在材料加工、通信和医疗等领域有着重要应用.应变量子阱结构的出现提高了GaAs基半导体激光器的转换效率、输出功率和可靠性.本文综述了高功率GaAs基量子阱激光器历史发展,介绍了高功率半导体激光器的外延结构、芯片结构和封装结构设计,重点阐述了影响高功率GaAs基量子阱激光器光电性能、散热和...     

同轴虚阴极振荡器实验研究

 介绍了中国工程物理研究院应用电子学研究所关于同轴虚阴极振荡器实验的最新进展。实验结果表明,带阳极反射板结构的同轴虚阴极振荡器比不带阳极反射板结构的同轴虚阴极振荡器输出微波功率更高,频谱更纯。在二极管电压350 kV,电流23 kA条件下,输出微波峰值功率500 MW,能量转换效率约6.2%,工作频率为3.3 GHz。对实验结果进行了理论分析。     

超亲水-超疏水组合壁面冷凝性能研究

本文通过水热法,结合气相沉积法和掩膜紫外光刻法,在玻璃基底上成功地制备了一种具有多尺度结构的超亲水-超疏水组合壁面,并对制备的具有不同润湿差异的组合壁面的冷凝效率进行了测试。结果表明壁面的冷凝效率取决于亲疏水区域的宽度和润湿性差异,其中当亲水区域宽度为0.80 mm,接触角约为0°,疏水区域宽度为0.95 mm,接触角为158°时,其冷凝效率相比光滑铜片的冷凝效率可以提高39%。进一步分析表明,液滴在极端润湿模式的组合表面的润湿分界线处具有较高的体积传输速率,且在超亲水区形成的连续微流通道加快了冷凝液滴快速排放,提高了整体表面的自更新能力。本文的研究,将为复杂润湿界面滴状冷凝的优化提供方向。     

Degradation of Rhodamine B in aqueous solution by laser cavitation

A novel method of laser cavitation (LC) was proposed for degrading organic dye wastewater. Rhodamine B (RhB) aqueous solution was employed as the simulated organic dye wastewater, and a LC system was designed to conduct the experiments of degrading RhB. The effects of laser energy, initial concentration and cavitation time on the degradation were investigated. Moreover, the degradation kinetics, degradation mechanism and energy efficiency were analyzed. The experimental results indicate that RhB aqueous solution can be degraded effectively by LC and the degradation follows the pseudo-first-order kinetics. The extent of degradation increases by 27.6% with the rise of laser energy (50–100 mJ) while it decreases by 7.8% with increasing the initial concentration from (20–40 mg/L), but RhB can not be degraded when exceeding 100 mg/L. The degradation extent of RhB at 100 mJ and 20 mg/L for 3 h is 81.11%, and the RhB solution is almost completely degraded at 150 mJ (98.4%). The degradation velocity of RhB rises firstly and then decreases as the cavitation time increases. The degradation of RhB by LC can be attributed to the N-de-ethylation and chromophore cleavage caused by oxidation of hydroxyl (OH) radical and thermal decomposition. LC has a higher energy efficiency compared with other methods and is more energy efficient at lower laser energy.