Effect of mobile phase density gradients on efficiency in packed column supercritical fluid chromatography

Summary The efficiency of packed columns was measured as a function of flow rate, temperature, outlet density, and the density differential across the column, unsing pure carbon dioxide as the mobile phase. Although density differentials are often blamed for a serious loss in efficiency in packed column supercritical fluid chromatography, the results show that efficiency was not a function of the density differential. Peak shapes suggest that apparent loss in efficiency is actually due to inadequate solubility of the solute in carbon dioxide.     

Efficiency of connected binary block designs when a single observation is unavailable

In this paper the problem of finding the design efficiency is considered when a single observation is unavailable in a connected binary block design. The explicit expression of efficiency is found for the resulting design when the original design is a balanced incomplete block design or a group divisible, singular or semiregular or regular with ₁>0, design. The efficiency does not depend on the position of the unavailable observation. For a regular group divisible design with ₁>0, the efficiency depends on the position of the unavailable observation. The bounds, both lower and upper, on the efficiency are given in this situation. The efficiencies of designs resulting from a balanced incomplete block design and a group divisible design are in fact high when a single observation is unavailable.The work of the first author is sponsored by the Air Force Office of Scientific Research under Grant AFOSR-90-0092.On leave from Indian Statistical Institute, Calcutta, India. The work of the third author was supported by a grant from the CMDS, Indian Institute of Management, Calcutta.     

Anodic behavior of nickel-based alloys in the electrolytic production of NF3

The Ni-based alloys, such as Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si, prepared by hot isostatic pressing (HIP) at 1000 °C under 2 × 10⁸ Pa for 2 h were employed as the anodes for electrolytic production of NF₃. The current efficiencies for NF₃ formation were 42-38, 52-40, 52-47, 63-62, 50 and 41% for Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloys, respectively. The current efficiencies only on Ni-Cu alloys with Cu concentrations lower than 10 mol% were almost the same as those on Ni sheet and HIPed Ni anodes, whereas those on the other alloys used in this study were smaller compared with those on both Ni anodes. On the other hand, the current losses caused by anodic dissolution of Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloy electrodes were 7.95-4.42, 6.40-7.02, 5.60-6.30, 3.34-6.33, 5.10 and 0.18%, respectively. The anode consumptions of Ni-5 mol% Cu and Ni-5 mol% Si alloys were almost the same or smaller compared with those of Ni sheet and HIPed Ni electrodes, though those of other alloys used were large compared with those of both Ni anodes. Consequently, addition of Cu to the nickel matrix is available for a cheaper cost of anode with keeping a same current efficiency as that on the Ni anode and addition of Si to the nickel matrix is effective for decreasing anode consumption largely. A Ni sheet electrode containing a trace of impurities, such as Co, Mn, Ag and Al, is also favorable as the anode for electrolytic production of NF₃.     

Rapid determination of desorption efficiency, and analysis of solvent mixtures for occupational exposure studies

Summary An analytical procedure has been developed for simultaneous determination of solvent mixture vapors to enable evaluation of occupational exposure. To determine the desorption efficiency the volatile components of the solvent mixtures were generated from a glass tube filled with glass wool. This device is easy to prepare and use. These vapors were then collected in activated charcoal tubes and analyzed by capillary gas chromatography. The method was tested with a mixture of 22 solvents, including aliphatic and aromatic hydrocarbons, alcohols, ethers, esters, and ketones, all at low concentrations. All the components were detected. When a 99∶1 mixture of carbon disulfide-dimethylformamide was used for desorption the efficiency was>75% for most of the solvents.     

基于吡咯并吡咯二酮核心的苝二酰亚胺类受体分子的合成及光伏性能

苝二酰亚胺类小分子由于其固有的强分子聚集特性,导致活性层形貌难于调控,器件效率相对于近年来报道的受体-给体-受体型稠环小分子受体一直处于劣势.针对这一关键问题,我们设计并合成了三个以吡咯并吡咯二酮为中心核的双臂型和四臂型苝二酰亚胺类小分子受体.其中,c-PDI2和nc-PDI2两个双臂型分子分别将两个苝二酰亚胺臂置于吡咯并吡咯二酮核心骨架的碳取代位和氮取代位;四臂型PDI4是将四个苝二酰亚胺臂置于吡咯并吡咯二酮核心骨架的四个取代位.通过对三个受体小分子的光谱吸收、能级水平、薄膜形貌以及光伏性能的详细研究,发现三个受体小分子都拥有扭曲的分子结构并由此带来无定形薄膜形貌,表明其分子聚集趋势得到了有效的抑制.相对于双臂型受体分子,四臂型PDI4具有更强的光吸收能力和电子传输性能,从而获得了8.45%的最高光电转换效率,是c-PDI2器件效率的2倍和nc-PDI2器件效率的1.5倍.     

Analysis of Imperfect Rephasing in Photon Echo-Based Quantum Memories

Over the last two decades, quantum memories have been intensively studied for potential applications of quantum repeaters in quantum networks. Various protocols have also been developed. To satisfy no noise echoes caused by spontaneous emission processes, a conventional two-pulse photon-echo scheme has been modified. The resulting methods include double-rephasing, ac Stark, dc Stark, controlled echo, and atomic frequency comb methods. In these methods, the main purpose of modification is to remove any chance of a population residual on the excited state during the rephasing process. Here, we investigate a typical Gaussian rephasing pulse-based double-rephasing photon-echo scheme. For a complete understanding of the coherence leakage by the Gaussian pulse itself, ensemble atoms are thoroughly investigated for all temporal components of the Gaussian pulse, whose maximum echo efficiency is 26% in amplitude, which is unacceptable for quantum memory applications.     

利用静电场中光电离效率谱精确确定1,3-二乙氧基苯分子的电离能

电离能是原子和分子的重要的特性参数,在光物理和光化学过程中起着重要作用,精确电离能对相关研究具有重要意义.电离能是调试零动能光谱信号的重要参考数据,在判断异构物数量和分子构型方面也起着关键作用.1,3-二乙氧基苯是一种重要的苯的衍生物,实验证实在超声分子束中包含两种旋转异构物I(down-up)和III(down-do...     

GaAs基980nm高功率半导体激光器的研究进展

GaAs基980 nm半导体激光器在材料加工、通信和医疗等领域有着重要应用.应变量子阱结构的出现提高了GaAs基半导体激光器的转换效率、输出功率和可靠性.本文综述了高功率GaAs基量子阱激光器历史发展,介绍了高功率半导体激光器的外延结构、芯片结构和封装结构设计,重点阐述了影响高功率GaAs基量子阱激光器光电性能、散热和...     

同轴虚阴极振荡器实验研究

 介绍了中国工程物理研究院应用电子学研究所关于同轴虚阴极振荡器实验的最新进展。实验结果表明,带阳极反射板结构的同轴虚阴极振荡器比不带阳极反射板结构的同轴虚阴极振荡器输出微波功率更高,频谱更纯。在二极管电压350 kV,电流23 kA条件下,输出微波峰值功率500 MW,能量转换效率约6.2%,工作频率为3.3 GHz。对实验结果进行了理论分析。     

超亲水-超疏水组合壁面冷凝性能研究

本文通过水热法,结合气相沉积法和掩膜紫外光刻法,在玻璃基底上成功地制备了一种具有多尺度结构的超亲水-超疏水组合壁面,并对制备的具有不同润湿差异的组合壁面的冷凝效率进行了测试。结果表明壁面的冷凝效率取决于亲疏水区域的宽度和润湿性差异,其中当亲水区域宽度为0.80 mm,接触角约为0°,疏水区域宽度为0.95 mm,接触角为158°时,其冷凝效率相比光滑铜片的冷凝效率可以提高39%。进一步分析表明,液滴在极端润湿模式的组合表面的润湿分界线处具有较高的体积传输速率,且在超亲水区形成的连续微流通道加快了冷凝液滴快速排放,提高了整体表面的自更新能力。本文的研究,将为复杂润湿界面滴状冷凝的优化提供方向。