光生物节律因子计算模型的研究

通过实验测量额头温度拟合光生物节律因子-额温差曲线,对现有评价光生物效应作用大小的BioEq模型和CLA模型的计算结果进行分析比较.利用不同图片LCD屏幕的光谱计算节律因子,发现两种模型对于绿色波段的光抑制较强,而对红色波段的光则与实际不相符.通过对九种不同颜色的LED光源测试额头温度,比较模型计算结果与实际光生物效应的作用,发现光生物节律因子与生理体征变化线性递增,其中对BioEq模型的直线拟合相关度达到0.95.     

掺杂PbSe/PVA量子点的光致聚合物全息特性

通过原位合成法以聚乙烯醇辅助合成了6.5nm、10nm和15nm的PbSe量子点,研究了掺杂PbSe量子点的光致聚合物的全息特性.将三种尺寸的PbSe量子点按不同浓度分别掺入光致聚合物中,制成无机-有机复合型光致聚合物膜,并对其全息性能进行研究.复合聚合物膜的UV-Vis吸收光谱表明掺入的PbSe量子点并未与聚合物中的有机组分发生化学反应.采用氩氪离子激光器输出的647nm红光研究了复合聚合物膜的透过率和全息记录光栅的布喇格偏移与衍射效率.透过率曲线表明PbSe量子点在复合聚合物膜中分散良好,膜表面均匀.由于PbSe量子点在聚合物链中起支撑作用,复合聚合物膜在全息记录过程中不易发生形变,从而增加了聚合物膜的抗缩皱能力.衍射效率曲线表明掺入PbSe量子点的复合聚合物膜的衍射效率比未掺杂的有所提高.此外,体系存在一个最优值,当掺入平均粒径为10nm且浓度为3.6×10-6 mol/L的PbSe量子点时,样品的透过率达到84%,衍射效率从67.2%提升到89.7%,缩皱率降低到0.8%,极大提高了材料的全息性能.     

利用多像素光子计数器的光学串话效应提高光子探测效率

通过分析多像素光子计数器(MPPC)的工作原理和其光学串话(OC)效应的特点,提出在使用MPPC输出雪崩信号的幅度或电荷量作为光子计数的参量时,利用MPPC的OC效应能提高MPPC的光子探测效率的观点,并从理论上分析了OC效应对光子探测效率的影响。理论分析结果显示,在这两种光子计数模式下,利用OC效应能明显提高MPPC的光子探测效率。利用本文模型计算得出当MPPC的雪崩单元数M为1 600个,忽略OC效应时的光子探测效率等于30%,光学串话概率等于50%,以及单脉冲入射光子数均值为10时,包含OC效应影响的等效光子探测效率可提高50%,达45%左右。该结果对MPPC在天体物理、粒子物理、荧光光谱探测等弱光探测场合的应用有一定指导意义。     

低温等离子体处理化工恶臭污染物硫化氢的研究

采用电晕放电低温等离子体处理模拟硫化氢恶臭气体,考察了输入功率、初始浓度、气体湿度、停留时间等因素对降解效果和能量效率的影响,同时对反应过程进行了动力学研究。研究表明：输入功率以及停留时间对硫化氢降解的影响是积极的,但能量效率随着两者的增加先增大后减小。硫化氢的降解率随着初始浓度的增加而降低,而能量效率随着初始浓度的增加而增加。在气体湿度增加初期,硫化氢降解率和能量效率均随着气体湿度的增加而增加,当气体湿度为50%时达到最大值,然而随着气体湿度的进一步增加,其降解率和能量效率反而降低。对电晕放电低温等离子体处理硫化氢的反应动力学进行了分析,得到硫化氢的反应速率常数为kH2S=0.356 8 m3/（W·h）。     

Desorption/ionization efficiencies of triacylglycerols and phospholipids via EASI‐MS

Knowledge of the major effects governing desorption/ionization efficiency is required for the development and application of ambient mass spectrometry. Although all triacylglycerols (TAG) have the same favorable protonation and cationization sites, their desorption/ionization efficiencies can vary dramatically during easy ambient sonic‐spray ionization because of structural differences in the carbon chain. To quantify this somewhat surprising and drastic effect, we have performed a systematic investigation of desorption/ionization efficiencies as a function of unsaturation and length for TAG as well as for diacylglycerols, monoacylglycerols and several phospholipids (PL). Affinities for Na⁺ as a function of unsaturation level have also been assayed via comprehensive metadynamics calculations to understand the influence of this phenomenon on the ionization efficiency. The results suggest that dipole–dipole interactions within a carbon chain tuned by unsaturation sites govern ionization efficiency of TAG and PL. Copyright © 2014 John Wiley & Sons, Ltd.     

Alleviation of ion suppression effect in sonic spray ionization with induced alternating current voltage

In this study, alleviation of ion suppression effect in sonic spray ionization mass spectrometry (SSI‐MS) was investigated. Ion suppression effect was firstly compared between electrospray ionization (ESI) and conventional SSI, and more severe ion suppression effect was observed with SSI. Ion suppression effect of SSI was also found difficult to be alleviated by simply optimizing major parameters. Alternatively, we found that with the assistance of an alternating current (AC) voltage with low amplitude, the ion suppression effect was greatly alleviated (comparable with conventional ESI). That AC voltage was applied outside the SSI spray tip, and no direct contact between the electrode and spray solution was necessary. Besides the alleviation of the ion suppression effect, this newly‐developed method, termed as induced electrosonic spray ionization (IESSI), appeared to preserve similar charge state distribution with SSI for protonated cytochrome c, hemoglobin, and bradykinin. IESSI could also obtain significantly improved ion intensities (~1000‐fold over conventional SSI). In addition, tolerance of concentrated salts for IESSI‐MS was investigated through the analysis of cytochrome c in the presence of concentrated sodium chloride (NaCl) or ammonium acetate (NH₄OAc). Copyright © 2014 John Wiley & Sons, Ltd.     

用CdSe/ZnS量子点提高体异质结有机太阳电池的效率

通过掺杂吸收光谱在可见光波段的量子点可提高聚合物对可见光的吸收,因此掺杂CdSe/ZnS核-壳结构量子点(CQDs)能提高聚(3-己基噻吩):[6,6]-苯基-C61-丁酸甲酯(P3HT:PCBM)体异质结太阳电池的能量转换效率.本文研究了CdSe/ZnS量子点在P3HT:PCBM中的不同掺杂比例及其表面配体对太阳电池光伏性能的影响,优化器件ITO(氧化铟锡)/PEDOT:PSS(聚(3,4-乙撑二氧噻吩:聚苯乙烯磺酸)/P3HT:PCBM:(CdSe/ZnS)/Al的能量转换效率达到了3.99%,与相同条件下没有掺杂量子点的参考器件ITO/PEDOT:PSS/P3HT:PCBM/Al相比,其能量转换效率提高了45.1%.     

在LiCl-KCl-ZnCl_2熔盐体系中电化学共还原提取钕

针对镧系元素钕,本文通过循环伏安、开路计时电位、方波伏安等方法研究了773 K时Nd(III)在钼电极上在LiCl-KCl-ZnCl2熔盐体系中的电化学行为及Zn-Nd合金的形成过程.结果表明:在LiCl-KCl-ZnCl2熔盐中,Nd(III)在预先沉积的Zn阴极上欠电位沉积形成三种Zn-Nd金属间化合物.基于电化学行为研究,采用恒电位电解提取Nd并用方波伏安曲线测量来检测Nd(III)离子浓度的变化,然后通过电解前后Nd(III)离子浓度变化评估了Nd的电解提取效率.实验结果表明:-1.84 V恒电位电解进行50 h后,Nd(III)离子浓度接近于零,提取效率为99.67%.在973 K时通过恒电流电解提取Nd并获得了Zn-Nd合金,通过X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对合金的相组成和微观形貌进行了分析.XRD分析表明在Zn-Nd合金中存在Nd2Zn17,LiZn和Zn相,EDS能谱分析表明Nd在合金中的原子分数高达14.99%.     

高活性硫化铅电极的制备及在量子点敏化太阳能电池中的应用

为了提高量子点敏化纳晶薄膜太阳能电池的光电转换效率,我们通过连续在酸和多硫溶液中处理铅片制备了对多硫电解液具有高电催化活性的硫化铅电极.通过电化学阻抗谱测试评价所制备硫化铅电极的催化活性,从而确定制备高效硫化铅电极的最佳条件.以在最佳条件下制备的硫化铅为对电极、CdSe量子点敏化TiO2纳晶薄膜为工作电极和多硫电解液组装成量子点敏化太阳能电池.光电性能测试结果表明所制备的电极具有良好的催化活性和光电转换性能.与已报导的方法相比,新方法大幅度地减少制备过程所需的时间,但却提高了所制备的硫化铅对电极的催化活性.通过X射线衍射和扫描电镜测试表征了硫化铅的生成过程,探讨了催化活性提高的原因.