骨架结构多孔TiO2薄膜增强染料敏化太阳能电池性能

以空心球状TiO₂为基体、以片状TiO₂为骨架,采用刮刀法制备了染料敏化太阳能电池的多孔TiO₂光阳极薄膜。光电转化效率测试结果表明,当作为骨架支撑材料的片状TiO₂含量为20wt%时,光阳极薄膜组装成太阳能电池的光电转化效率达到最高值4.53%,比商业P25制备的无孔无骨架TiO₂薄膜电池(4.06%)及无骨架结构的多孔TiO₂薄膜电池(4.17%)的性能均有显著提高。当片状TiO₂的最佳含量为20wt%电池薄膜厚度为33 μm时,太阳能电池光电转化效率进一步提升为7.06%。光电性能增强的原因是骨架结构有利于快速传输电子并增大染料吸附量。本研究通过设计制备具有骨架结构的多孔TiO₂薄膜为提高染料敏化太阳能电池性能提供了新的思路。     

Comparison of sample preparation methods combined with gas chromatography with electron‐capture detection for the analysis of multipesticide residues in lotus seeds

Sample preparation is always the major bottleneck in analytical chemistry for the determination of pesticide residues. Different sample preparation methods have been proposed due to the wide variety of pesticides used and the inherent complexity of the matrices. In this study, different sample preparation methods including SPE, matrix solid‐phase dispersion, the quick, easy, cheap, efficient, rugged, and safe method, and a one‐step completion method were compared and evaluated for extracting pesticides from lotus seeds. Analysis was carried out using GC with electron‐capture detection. The results showed that good recoveries for tested pesticides were obtained by using Florisil in the four methods, and the extraction efficiency of the one‐step completion method was superior to the other three methods. The one‐step completion method was confirmed to have good linearity, reproducibility, stability, and recovery for the detection of 36 pesticides in lotus seed samples. The data collected from this study are expected to prove useful in regulating the concentration of the residues in lotus seeds, as well as in protecting human health from the hazards posed by these residues.     

SPE of 5‐lipoxygenase metabolites and the effect of head‐column field‐amplified sample stacking in MEKC

The SPE of leukotrienes and eicosatetraenoic acids using anion exchange materials was compared to the classical extraction with C₁₈ columns. A silica‐based strong anion exchanger, a polymer‐based weak anion exchanger, and a polymer‐based mixed‐mode strong anion exchanger were studied. All anion exchange materials displayed a higher recovery of the analytes with values between 70 and 90% when extracting standard solutions and analyzing by HPLC. The effect was less pronounced for the analysis of the compounds in incubations of polymorphonuclear leukocytes. Using MEKC with head‐column field‐amplified sample stacking for analyte quantification, much lower values of the peak areas were observed compared to the determination of the recovery of the analytes by HPLC. Using MEKC analysis, the highest values were found for the polymer‐based weak anion exchange material, while values below 10% were found for the polymer‐based mixed mode strong anion exchanger. This could be attributed to the presence of electrolytes in the eluates that compromised the stacking efficiency. The extent of residual electrolytes depended on the SPE protocol, resulting in large differences of the amount of analyte determined by MEKC when applying head‐column field‐amplified sample stacking for online analyte concentration.     

Automation of dimethylation after guanidination labeling chemistry and its compatibility with common buffers and surfactants for mass spectrometry-based shotgun quantitative proteome analysis

Isotope labeling liquid chromatography–mass spectrometry (LC–MS) is a major analytical platform for quantitative proteome analysis. Incorporation of isotopes used to distinguish samples plays a critical role in the success of this strategy. In this work, we optimized and automated a chemical derivatization protocol (dimethylation after guanidination, 2MEGA) to increase the labeling reproducibility and reduce human intervention. We also evaluated the reagent compatibility of this protocol to handle biological samples in different types of buffers and surfactants. A commercially available liquid handler was used for reagent dispensation to minimize analyst intervention and at least twenty protein digest samples could be prepared in a single run. Different front-end sample preparation methods for protein solubilization (SDS, urea, Rapigest™, and ProteaseMAX™) and two commercially available cell lysis buffers were evaluated for compatibility with the automated protocol. It was found that better than 94% desired labeling could be obtained in all conditions studied except urea, where the rate was reduced to about 92% due to carbamylation on the peptide amines. This work illustrates the automated 2MEGA labeling process can be used to handle a wide range of protein samples containing various reagents that are often encountered in protein sample preparation for quantitative proteome analysis.     

Temperature Effect on the Phase Behavior of the Systems Water/Sucrose Laurate/Ethoxylated‐mono‐di‐glyceride/Oil

The phase behavior of the systems water/sucrose laurate/ethoxylated mono‐di‐glyceride/oil was investigated as function of temperature and the weight ratio of EMDG in the mixed surfactants. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. This study demonstrates that the phase inversion temperature (PIT) decreases and the efficiency of the mixed surfactants (γ¯) increase as the weight ratio of the EMDG in the mixed surfactants increases. R (+)‐limonene gave lower phase inversion temperatures and higher efficiencies compared to isopropylmyristate, and caprylic‐capric triglyceride. The solubilization capacity of the system water/sucrose laurate/oil increased upon the addition of ethoxylated mono‐di‐ glyceride which stabilize the surfactant layer and increase the interfacial area.     

Propylene Glycol and Ethoxylated Surfactant Effects on the Phase Behavior of Water/Sucrose Stearate/Oil System

In this work, we studied the phase behavior as function of temperature of water/sucrose stearate/propylene glycol/oil and water/sucrose stearate/ethoxylated mono‐di‐glyceride/oil systems. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. It was found that adding propylene glycol and ethoxylated mono‐di‐glyceride to the water/sucrose stearate/R (+)‐limonene and water/sucrose stearate/isopropylmyristate systems decreases the temperature and surfactants concentration needed for the formation of a microemulsion phase region and no three phase region is observed. In the case of water/sucrose stearate/caprylic‐capric triglyceride system a three phase region is observed. In the caprylic‐capric based system, it was found that increasing the propylene glycol and ethoxylated mono‐di‐glyceride contents decrease the phase inversion temperature and increases the efficiency. In the case where the mixed surfactants (sucrose stearate and ethoxylated mono‐di‐glyceride) were present in the system, the efficiencies observed are higher than those observed in the system based on the mixture of sucrose stearate and propylene glycol.     

Antibacterial and Antifungal Activities—Surface Active Properties Relation of Novel Dischiff Base Cationic Gemini Amphiphiles Bearing Homogeneous Hydrophobes

A novel series of cationic Gemini amphiphiles containing Dischiff base species were synthesized and their chemical structures were determined using different analytical tools. Their surface properties were determined using surface tension measurements. The adsorption and micellization thermodynamic parameters were calculated using Gibb's equations at 25°C. The surface parameters were also determined including critical micelle concentration, effectiveness, efficiency, maximum surface excess, minimum surface area, interfacial tension, and emulsification power. The synthesized cationic Gemini surfactants were evaluated as bactericides for gram negative and gram positive bacteria and also against sulfur reducing bacteria (SRB). The results of the cytotoxicity of the synthesized compounds against the targeted bacterial strains were promising and completely dependent on the surface activity of these compounds.     

Electro-disclinic effect in tilted smectic phases of banana-shaped liquid crystal materials

We give the first evidence that the director tilt angle can be reduced by electric fields in the tilted smectic phase of banana-shaped molecules. In these phases the value of polarization is determined by the molecular packing and no electro-clinic effect is expected. Our studies show that high electric fields eventually induce a meta-stable phase with zero director tilt. The tilted phase slowly recovers at low fields. We propose that the field-induced quenching of the layer fluctuations is responsible for the observed effects.     

Development and application of an analytical protocol for evaluation of treatment processes for landfill leachates. II. Evaluation of leachate treatment efficiency of different steps in a constructed pilot plant

Different methods for treatment of leachate from a municipal solid waste (MSW) landfill were tested in a pilot plant. Raw leachate was pre-treated with aeration and sedimentation, followed by several parallel individual steps such as bioremediation, chemical oxidation, ozonation, and geo-bed filters. The efficiency of different treatment steps was evaluated according to one previously developed protocol, which includes measurements of several parameters such as conductivity, pH, nutrients, chloride, metals, organic compounds, and acute toxicity before and after a treatment step. The treatment steps which showed the highest efficiency towards organic pollutants in leachate were ozone treatment and chemical oxidation. The use of an adsorption filter, a geo-bed with a mixture of peat and bottom ash with ca 10% remaining carbon, also had good effects. A combination of pre-treatment and a geo-bed filter with peat and carbon ash gave the best overall treatment results when water-quality parameters such as total organic carbon and ammonia-nitrogen were also considered.