Flux and fluence dependence of disorder produced during implantation of 11B in silicon

The flux and fluence dependence of disorder produced in silicon during the implantation of ¹¹B has been investigated at room temperature, -50°C. and -120°C. Implantations were carried out with 200 keV ¹¹B ions using current densities in the range from 0.06μA/cm² to 15μA/cm², and the disorder monitored by measuring the energy spectra of backscattered protons which were incident on the sample at 450 keV parallel to a (110) axis. Significant differences in the dependence of the disorder on ¹¹B flux and fluence were observed between the implantations performed at room temperature and those carried out at the two lower temperatures.     

Local defect structures and EPR studies on (FeO6)9− and (FeO4)5− clusters in YGG: Fe3+ system

The octahedral (FeO₆)^9? and tetrahedral (FeO₄)^5? clusters in yttrium gallium garnet (YGG): Fe³⁺ system are investigated based on the 252 × 252 complete energy matrices for d⁵ configuration ions in trigonal and tetragonal ligand fields, moreover, the EPR and optical spectra are made unified calculation. The results indicate that the defect structures around Fe³⁺ centres display expansion effects at different temperatures 4.2 and 295 K, and which are close to those in YIG garnet, respectively. Simultaneously, the defect structure parameters for Fe³⁺ centres in YGG are determined, and the relationship between the defect structure and the temperature has been discussed.     

Effect of the Cu co-activator on the charge-carrier trapping efficiency in CaSO4:Tm,Cu

Rare earth doped CaSO₄ materials are well known thermoluminescent dosimeters with friendly properties. They are used in the practice for a long while. New phosphors based on CaSO₄:Tm were synthesized using a modified preparation method for adding Cu as co-dopant. The produced materials have several favorable new characteristics. Larger linear dose response range, simpler glow-curve structure and a small diminution in the sensitivity are the consequences of the copper addition. Trapping efficiency of samples containing different amounts of Tm and Cu was investigated as the function of the composition using a consecutive RL/TL measuring technique. It was cleared up that the Cu addition, depending on its amount, reduced this value. This plays the main role in the sensitivity loss and forms one of the factors in the explanation of the linear dose range widening.     

Harvesting vibrations via 3D phononic isolators

We report on the existence of unidirectional phononic band gaps that may span over extended regions of the Brillouin zone and can find application in trapping elastic (acoustic) waves in properly designed multilayered 3D structures. Phononic isolators operate as a result of asymmetrical wave transmission through a slab of a crystallographic phononic structure with broken mirror symmetry. Due to the use of lossless materials in the crystal, the absorption rate is dramatically enhanced when the proposed isolator is placed next to a vibrational harvesting cell.     

spin-lattice relaxation in cobalt-containing aluminophosphate molecular sieves

Phosphorus spin-lattice relaxation was studied in aluminophosphate molecular sieves containing various concentrations of either framework or non-framework cobalt. The behaviour of nuclear magnetisation in the presence of these paramagnetic centres was described successfully in the limit of no spin-diffusion. The diffusionless regime was strongly indicated with non-exponential magnetisation recovery and was therefore easy to recognise. According to the model, spin-lattice relaxation rates depend on the square of cobalt concentration. Measured relaxation rates agreed well with calculations if effective cobalt concentration was considered rather than the average one. The latter was obtained by bulk elemental analysis, while the former was extracted from cobalt concentration depth-profiles measured with Auger electron spectroscopy. These measurements indicated that in impregnated samples containing non-framework cobalt there could be much more cobalt near the crystal surface than within the crystal. Because high cobalt concentration can lead to an invisible phosphorus, only nuclei deep within the crystal contribute to the NMR signal. In such a case, the effective concentration is simply the concentration of cobalt far from the crystal surface. In our case, two impregnated samples with different bulk cobalt concentrations exhibited equal relaxation rates. Previously, such a case was misinterpreted as a case, in which nuclear spin-lattice relaxation was independent of cobalt concentration. AES measurements, however, revealed, that although average concentrations of the two samples were different by a factor of two, their effective concentrations were equal and thus in complete agreement with observed relaxation rates.     

三个不动中心问题的一个三维解

本文对三个不动中心问题的平面解作进一步发展，通过对三个不动中心在四维空间中的定义得到三个不动中心问题的三维解．     

A THREE-DIMENSIONAL SOLUTION OF THE PROBLEM OF THREE FIXED CENTRES

ＡＴＨＲＥＥ－ＤＩＭＥＮＳＩＯＮＡＬＳＯＬＵＴＩＯＮＯＦＴＨＥＰＲＯＢＬＥＭＯＦＴＨＲＥＥＦＩＸＥＤＣＥＮＴＲＥＳ￥ＱｉｎＹｉｐｉｎｇ（覃一平）ＮｉｅＺｈａｏｍｉｎｇ（聂昭明）（ＹｕｎｎａｎＯｂｓｅｒｖａｔｏｒｙ，ＡｃａｄｅｍｉａＳｉｎｉｃａ，Ｋｕｎ...     

Studies on long lasting optical properties of Eu2+ and Dy3+ doped di-barium magnesium silicate phosphors

Di-bariummagnesium silicate phosphors doped with europiumand dysprosium were prepared under a weak reducing atmosphere. X-ray diffraction pattern of the sample was also done that confirmed the proper preparation of the phosphor. Scanning electron microscope (SEM) images confirmed that the sample has regular surface and uniform grain size distribution. Comparative studies of phosphorescence decay of Ba₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors with different concentration of Dy³⁺ were done. The phosphor with 0.5/1.5 mol% of Eu/Dy, exhibited optimum green color afterglow properties. This emission is expected to arise due to transition of Eu²⁺ ions from any of the sublevels of 4f⁶5d¹ configuration to ⁸S_7/2 level of the 4f⁷ configuration. For a suitable trap depth, the trap concentration is expected to be proportional to the concentration of Dy³⁺. These traps are responsible for holding the charge career for a reasonable time, subsequently for increasing the time of afterglow. Hence, optimum Dy³⁺ concentration produces the longer afterglow duration with higher intensity of luminescence signals. Trap depth were also calculated using thermoluminescence glow curve which was indicative of formation of traps suitable for long afterglow.     

Silica surface controversies,strong adsorption sites,their blockage and removal. Part II

Summary In this second part of the review heterogeneity of the silica surface is described and evidence is presented for the existence of a low population of strong adsorption sites. Methods of detection and determination of these strongly interacting sites are discussed. The last part of the review is devoted to the suppression of unwanted adsorption activity. Methods of blockage and special methods for the preparation of HPLC packings are described.