Load supporting prefabricated wall reinforced by a frame

This load supporting prefabricated wall consists of a thin plate reinforced along its boundaries by a frame. With the loads acting on the frame, the plate has its boundary conditions defined neither by forces nor by displacements. On the basis of satisfying the biharmonic equation of the stress function for the plate, we make the total strain energy to be minimum to ensure the compatibility of displacements for the two elastic bodies. Thus we get a set of infinite simultaneous equations. The results obtained indicate the method of solution is effective.     

An approximate solution considering flow inertia between spherical surfaces

In this paper, the analytical expressions of the pressure distribution, velocity distribution and discharge of the flow between spherical surfaces are found by using the method of iterative approximate solution when the inertia terms of Navier-Stokes equations in spherical coordinates are taken into consideration. Furthermore, using these expressions, we can directly obtain the corresponding analytical expressions of the laminar radial flow between parallel disks, which are fully identical with corresponding results presented by refs. [3,4].     

Eigenvalue problem for integro-differential equation of supersonic panel,flutter

The dynamic stability of a thin plate in supersonic flow based on 2-dimensional linear theory leads to the study of a new problem in mathematical physics: complex eigenvalue prob-lem for a non-self-adjoint fourth-order integro-differential equation of Volterra’s type.Exact solutions of the aeroelastic system is obtained. In contrast to various approximate analyses, our critical curve agrees satisfactorily with experimental data, being free from divergence in the low supe’rsonic region. Moreover, we observe some notable physical behaviors: (1) mutual separation of flutter and vacuum frequency spectrums, (2) degeneracy of critical Mach number. The present method may be generalized in solving the supersonic flutter for 3-dimensional airfoil model as well as blade cascade in turbo-generator.     

Solution of bending of cantilever rectangular plates under uniform surface-load by the method of two-direction trigonometric series

The bending of a cantilever rectangular plate is a very complicated problem in thetheory of plates.For a long time,there have been only approximate solutions for thisproblem by energy methods and numerical methods.since 1979,Prof.F.V.Chang of Tsing Hua University obtained,by the method ofsuperposition,a series of analytic solutions for cantilever rectangular plates under uniformload and concentrated load.In this paper,the two-direction trigonometric series is used to obtain the solution forthe bending of cantilever rectangular plates under uniform load.The obtained results arecompared with the results by the method of superposition.The comparison shows that theresults of these two methods are in good agreement,hence they are mutually confirmed to becorrect.     

New development in Poincaré's problem of irregular integrals

In connection with non-Fuchsian equations Poincaré has made an important conclusion: It is impossible to obtain explicit expressions of irregular integrals .To elucidate the essence of Poincaré's problem, we establish correspondence theorem. Irregular integrals are analytic functions of new kind, possessing tree structure; part of which can be represented by conventional recursive series, while its remaining part is expressed by the so-called tree series, not subjecting to any recursive relation at all.In contrast to the numerical solution calculated by infinite determinant of classical theory (Hill-Poincaré-von Koch), our method yields naturally exact analytic solution in explicit form. The method proposed may be used to construct a unifying theory for general equations with variable coefficients, having various kinds of singularities as singular lines.The significance of Poincaré conjecture is discussed, the tree series obtained belong to higher automorphic functions.     

计算V形切口应力集中的奇应变单元

提出了计算 V 形切口断裂问题的含有两种奇异性的奇应变三角形单元。当 V 形切口闭合成裂缝时,该单元就自动演变成前人提出的计算裂纹的奇应变三角形单元。故本文提出的 V 形切口奇应变三角形单元是裂纹奇应变三角形单元的推广,可用来计算一般切口的应力强度因子,以进行断裂控制计算。     

棱镜自重变形对波面影响的研究

采用有限元方法分析了单棱镜在重力作用下三个典型位置的表面变形,对棱镜表面Φ425mm通光孔径轴向变形量进行Zernike多项式拟合,画出了相应的波差图,并确定设计方案.进一步选择Φ360 mm口径光束对双棱镜在几种典型相对位置下进行光线采样、追迹,计算得到不同情况下由于双棱镜自重变形引起的总波差.     

光谱色散匀滑技术与衍射光学器件联用性能的空间频谱分析

基于空间频谱分析方法,建立了光谱色散匀滑技术(SSD: Smoothing by Spectral Dispersion)与衍射光学器件(DOE: Diffractive Optical Element)联用性能的简化分析模型,为SSD与DOE联用时,SSD参量的优化提供了理论依据.数值模拟了SSD各参量,包括脉冲时间、调制频率、位相调制系数、光栅线色散系数等对束匀滑性能的影响.模拟结果表明,SSD参量经过优化选取,且波前畸变随时间快速变化时,能获得良好的束匀滑性能.     

SIMPLE TECHNIQUES FOR DETERMINING THE SMALL-SIGNAL EQUIVALENT CIRCUIT OF MESFET’s

Simple techniques for determining the broadband small signal equivalent circuit (SSEC) of MESFETs are presented in this paper. The intrinsic elements are calculated using two-dimensional method from the Y parameters, which are obtained from the Fourier analysis of the device transient response to voltage-step perturbations at the drain and gate electrodes. Whereas, the parasitic external elements are determined by simple approximations used in transmission line modeling. In addition, a new technique is also proposed to determine the source and drain series resistances. A comparison of the SSEC of three different MESFETs technologies shows that the MESFETs on GaN and 4H-SiC are suitable for high power applications. The method used to determine the intrinsic elements is validated with simulated data obtained by Monte Carlo method.     

Laser soldering of flip-chips

A novel process for laser soldering of flip-chips on transparent printed circuit board assemblies is presented. The experiments were carried out on silver test patterns printed on glass wafers using a roller-type gravure offset printing method. The contact pads, where the bumps of the flip-chips are positioned, were covered with a thin layer of additional solder paste. The aligned samples (solder pad—solder paste—chip bump) were illuminated through the glass substrate using an Ar⁺ laser beam (, , at 1/e) to heat the printed pad and melt the solder paste, thus forming a joint between the printed pad and the chip bump. The heat-affected zone was modeled using computer-assisted finite element method. The solder joint cross-sections were analyzed using optical and electron microscopy as well as energy dispersive X-ray element analyses. The laser-soldered joints were of good mechanical and electrical quality and the process proved to be suitable for manufacturing customized circuit prototypes.