渐进非对称陀螺分子16O3及同位素16O18O16O的配分函数研究

采用乘积近似法计算了臭氧分子16O3及其同位素16O18O16O在20-6000 K温度范围内的总配分函数。其中转动配分函数用Watson的刚性转子模型,振动配分函数用谐振子模型．总的温度范围被划分为五个温度段。计算的配分函数在这五个温度段分别被拟合到一个温度T的五阶多项式,从而在每个温度段均得到六个拟合系数。由这些拟合系数就可以快速、准确的获得分子在所研究温度范围内任意温度的总配分函数。研究结果为目标特性识别、气动物理的高超声速技术等领域的研究提供了重要的参考信息。     

Optimization of ultrasound-assisted extraction of total monomeric anthocyanin (TMA) and total phenolic content (TPC) from eggplant (Solanum melongena L.) peel

The present study describes the extraction of total monomeric anthocyanin (TMA) and total phenolic content (TPC) from eggplant peel using ultrasonic treatments and methanol and 2-propanol as extraction solvents. The extraction yields were optimized by varying the solvent concentration, ultrasonic frequency, temperature and time of ultrasonic treatment. Box–Behnken design was used to investigate the effect of process variables on the ultrasound-assisted extraction. The results showed that for TPC extraction the optimal condition were obtained with a methanol concentration of 76.6%, 33.88 kHz ultrasonic frequency, a temperature of 69.4 °C and 57.5 min extraction time. For TMA the optimal condition were the following: 54.4% methanol concentration, 37 kHz, 55.1 °C and process time of 44.85 min.     

A constructive characterization of total domination vertex critical graphs

Let G be a graph of order n and maximum degree Δ(G) and let γ_t(G) denote the minimum cardinality of a total dominating set of a graph G. A graph G with no isolated vertex is the total domination vertex critical if for any vertex v of G that is not adjacent to a vertex of degree one, the total domination number of G−v is less than the total domination number of G. We call these graphs γ_t-critical. For any γ_t-critical graph G, it can be shown that n≤Δ(G)(γ_t(G)−1)+1. In this paper, we prove that: Let G be a connected γ_t-critical graph of order n (n≥3), then n=Δ(G)(γ_t(G)−1)+1 if and only if G is regular and, for each v∈V(G), there is an A⊆V(G)−{v} such that N(v)∩A=0?, the subgraph induced by A is 1-regular, and every vertex in V(G)−A−{v} has exactly one neighbor in A.     

微波辅助提取刺梨中总黄酮的工艺参数优化

以刺梨果实为原料,对微波辅助提取刺梨中的总黄酮的工艺进行研究,采用单因素试验法对影响微波辅助提取刺梨果实中总黄酮的影响因素进行分析,利用正交试验优化提取总黄酮的工艺条件。研究表明,微波辅助提取刺梨总黄酮的最佳工艺条件为:料液比1:20(g/mL),乙醇浓度60%,微波萃取功率400W,微波辐射时间3min。最佳工艺条件下的总黄酮的提取率为1.39%。     

N2��Ƶ�ŵ��������(e,N2+, N+)��PIC-MCģ��

采用PIC-MC自洽模型,模拟了氮气电容性耦合射频放电的微观等离子体过程及带电粒子(e,N2+,N+)的行为。结果表明,离子(N2+,N+)的运动状态滞后瞬时射频电场的变化;在两极附近,N2+具较高密度,但能量较低,N+具较低的密度但能量较高,两者的密度差6倍左右。两种离子轰击射频电极的能量分布变化规律类似,随放电参数变化,离子(N2+,N+)能量变化显著,其密度变化不明显。模拟的电子能量几率分布与测量结果一致。     

15N/14N Isotopic Exchange in the Dissociative Adsorption of N2 on Tantalum Nitride Cluster Anions Ta3N3-

Adsorption and activation of dinitrogen (N₂) is an indispensable process in nitrogen fixation. Metal nitride species continue to attract attention as a promising catalyst for ammonia synthesis. However, the detailed mechanisms at a molecular level between reactive nitride species and N₂ remain unclear at elevated temperature, which is important to understand the temperature effect and narrow the gap between the gas phase system and condensed phase system. Herein, the ¹⁴N/¹⁵N isotopic exchange in the reaction between tantalum nitride cluster anions Ta₃¹⁴N₃^- and ¹⁵N₂ leading to the regeneration of ¹⁴N₂/¹⁴N¹⁵N was observed at elevated temperature (393-593 K) using mass spectrometry. With the aid of theoretical calculations, the exchange mechanism and the effect of temperature to promote the dissociation of N₂ on Ta3N3? were elucidated. A comparison experiment for Ta₃¹⁴N₄^-/¹⁵N₂ couple indicated that only desorption of ¹⁵N₂ from Ta₃¹⁴N₄¹⁵N₂^- took place at elevated temperature. The different exchange behavior can be well understood by the fact that nitrogen vacancy is a requisite for the dinitrogen activation over metal nitride species. This study may shed light on understanding the role of nitrogen vacancy in nitride species for ammonia synthesis and provide clues in designing effective catalysts for nitrogen fixation.     

Ferrozine colorimetry and reverse flow injection analysis (rFIA) based method for the determination of total iron in aqueous solutions at nanomolar concentrations

Iron is one of the most microbiologically and chemically important metals in natural waters. The biogeochemical cycling of iron is significantly influenced by the redox cycling of Fe(II) and Fe(III). Because of the unique chemistry of iron, it is often needed to analyze iron at nano-molar concentrations. This article describes a reverse flow injection analysis (rFIA) based method with ferrozine spectrophotometric detection to quantify total iron concentration in stream water at nanomolar concentrations. The rFIA system has a 0.65 nM detection limit and a linear dynamic range up to 1.40 μM for the total iron analysis. The detection limit was achieved using a 1.0 m long liquid waveguide capillary flow cell, 1.50 m long knotted reaction coil, 87.50 μL injection loop and a miniature fiber optics spectrophotometer. The optimized colorimetric reagent has 1.0 mM ferrozine, 0.1 M ascorbic acid, 1.0 mM citric acid and 0.10 M acetate buffer adjusted to pH 4.0. The best sample flow rate is 2.1 mL min^?1 providing a sample throughput of more than 15 samples h^?1. The linear dynamic range of the method can be adjusted by changing the volume of the injection loop. The rFIA manifold was assembled exclusively from commercially available components.     

Assessing bias in total mercury results after removing a subsample from the bottle

U.S. EPA Method 1631 for total mercury (THg) analysis in water recommends that bromine monochloride (BrCl) be added to the original bottle in which the sample was collected, to draw into solution any Hg that may have adsorbed to the bottle walls. The method also allows for the removal of a subsample of water from the sample bottle for methylmercury (MeHg) analysis prior to adding BrCl. We have demonstrated that the removal of a subsample from the sample bottle prior to THg analysis can result in a positive concentration bias. The proposed mechanism for the bias is that ‘excess’ inorganic Hg, derived from the subsample that was removed from the bottle, adsorbs to the bottle walls and is then drawn into solution when BrCl is added. To test for this bias, we conducted an interlaboratory comparison study in which nine laboratories analysed water samples in fluorinated polyethylene (FLPE) bottles for THg after removing a subsample from the sample bottle, and analysed a replicate sample bottle from which no subsample was removed. We received seven complete data sets, or 63 unique sample pairs. The positive concentration bias between the bottles was significant when comparing all samples in aggregate (1.76 ± 0.53 ng/L after subsample removal, 1.57 ± 0.58 ng/L with no subsample removal, P < 0.05), however when comparing each of the three samples individually, the only significant bias was in the saline sample (Site UJ; 1.51 ± 0.31 ng/L after subsample removal, 1.32 ± 0.47 ng/L with no subsample removal, P < 0.05). Based on the findings presented here, we conclude that water chemistry, volume of water poured off, and the sample storage temperature explain some but not all of the observed bias, and we recommend collecting THg and MeHg samples in separate bottles whenever possible.     

One‐Pot Synthesis of Nitrogen‐doped TiO2 Nanowires with Enhanced Photocurrent Generation

A nitrogen‐doped TiO₂ (N‐TiO₂) nanowire film was synthesized via a one‐pot hydrothermal method using triethylamine as nitrogen source. The effect of the concentration of the triethylamine on the films was evaluated. In addition, the N‐TiO₂ nanowires were characterized using field‐emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and ultraviolet–visible spectroscopy. A 3.2× enhancement of the photocurrent for N‐TiO₂ (0.6) was achieved over the as‐prepared TiO₂ nanowire, under AM1.5G solar illumination. This was due to nitrogen doping, which could narrow the bandgap of titania to extend the adsorption of the catalyst to the visible light region.     

Structures and stability of N9, N9 − and N9 + clusters

 Ab initio molecular orbital calculations for N₉, N⁻ ₉ and N⁺ ₉ isomers were carried out at the HF/ 6-31G*, B3PW91/6-31G*, B3LYP/6-31G* and MP2/ 6-31G* levels of theory. Stable equilibrium geometric structures were determined by harmonic vibrational frequency analyses at the HF/6-31G*, B3PW91/6-31G* and B3LYP/6-31G* levels of theory. The most stable free-radical N₉ cluster is structure 1 with C _{2 v} symmetry and that of anion N⁻ ₉ is structure 3 with C _s symmetry. Only one stable structure of the N⁺ ₉ cation with C _{2 v} symmetry was predicted. Their potential application as high-energy-density materials has been examined. Received: 15 June 1999 / Accepted: 11 October 1999 / Published online: 14 March 2000