Bending-torsion vibration of a partially submerged cylinder with an arbitrary cross-section

An analytical method is presented to investigate the bending-torsion vibration characteristics of a cylinder with an arbitrary cross-section and partially submerged in water. The compressibility and the free surface waves of the water are considered simultaneously in the analysis. The exact solution of structure–water interaction is obtained mathematically. Firstly, the analytical expression of the velocity potential of the water is derived by using the method of separation of variables. The unknown coefficients in the velocity potential are determined by the longitudinal and circumferential Fourier expansions along the outer surface of the cylinder and are expressed in the form of integral equations including the unknown dynamic bending deflection and torsional angle of the cylinder. Secondly, the force and torque acting on the cylinder per unit length, provided by the water, are obtained by integrating the water dynamic pressure along the circumference of the cylinder. The general solution of bending-torsion vibration of the cylinder under the water dynamic pressure is derived analytically. The integral equations included in the velocity potential of the water can be solved exactly. Finally, the eigenfrequency equation of cylinder–water interaction is obtained by means of the boundary conditions of the cylinder. Some numerical examples for elliptical columns partially submerged in water are provided to show the application of the present method.     

利用驻波实验研究混沌现象

利用驻波实验演示了混沌现象,并对其进行了理论分析和计算机仿真研究.仿真结果与实验结果都表明:当连接点接近驻波波节处时,振动系统处于混沌运动状态;而当连接点接近驻波波腹处时,系统处于稳定驻波运动状态.     

激光二极管自混合干涉和微振动的实验观测

介绍了利用LabView软件虚拟示波器和信号源,对激光二极管自混合干涉和微振动进行的实验观测.该实验可以作为本科低年级学生的综合设计实验.     

振动系统的模态分析实验设计

利用模态分析原理和简单试验仪器，得到了直观的悬臂梁和圆盘前4阶模态振型，使学生熟悉了模态分析原理和测试方法，有利于学生对振动规律的理解．     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Predicting vibration signals of automobile engine using chaos theory

Condition monitoring and life prediction of the vehicle engine is an important and urgent problem during the vehicle development process. The vibration signals that are closely associated with the engine running condition and its development trend are complex and nonlinear. The chaos theory is used to treat the nonlinear dynamical system recently. A novel chaos method in conjunction with SVD (singular value decomposition)denoising skill are used to predict the vibration time series. Two types of time series and their prediction errors are provided to illustrate the practical utility of the method.     

Analysis of nonlinear sliding structures by modified stochastic linearization methods

Probabilistic characteristics of a sliding structure is investigated by using new versions of stochastic linearization technique. The structure is composed of base part and upper part, which are connected to each other in a spring-damping system. Coulomb friction between the base structure and earth ground is considered. Two alternative versions of stochastic linearization approach, suggested by X. Zhang and I. Elishakoff, respectively, are applied to such a sliding structure to evaluate its statistical properties. Compared with the results of Monte Carlo simulation, the two new approaches are performing much better than the conventional one in their applications to the sliding structure. Moreover, numerical results indicate that the criterion proposed by Elishakoff turns out to be superior to all other versions in the problem under study. Numerical results also suggest that the entire structure may be replaced by the rigid body in the sliding problem as long as the difference of velocity responses are considered less important than those of displacement responses.     

1-烃基-1-硅杂环丁烷的合成及其Si—H键伸缩振动频率与结构关系的研究

硅杂环丁烷在有机硅化学中是一类非常重要的小分子环系化合物。由于硅杂环丁烷和环丁烷的环张力相似,因而显示出较高的反应活性。例如能与某些试剂作用,生成开环产物;在光解或热解条件下,产生具有Si=C结构的高活性中间体,可用以合成多种有机硅化合物。     

2-(N'-乙基咔唑-3'-烯基)-8-羟基喹啉的合成及理论研究

设计合成了2-(N'-乙基咔唑-3'-烯基)-8-羟基喹啉. 以UV-Vis, ¹H NMR, FT-IR, 元素分析和MS进行了结构表征, 并测定了产物的光致发光(PL)性质. 运用Gaussian98量子化学程序包, 采用B3LYP密度泛函(DFT)的方法, 在6-31G(d,p)水平上对分子的几何构型进行结构优化; 预测目标产物的振动光谱, 结果表明与实验值相符.